Doppelt Leitung Bördelgerät Satz / Bremsleitung Fackelsatz
This flaring set is suitable for double and single flares of copper, aluminum and mild steel brake lines and brass tubes up to 45 degrees.
Content:
5 adapters in the sizes = 3/16", 1/4", 5/16", 3/8" and 1/2" (4.8, 6.4, 7.9,9.5 and 12.7mm)
pipe holder
spreader
LKW Kompression test Satz diesel
This compression test set is suitable for checking the condition of a diesel engine. With no fewer than 7 adapters, the set is suitable for almost all truck diesel engines.The set consists of a pressure gauge with hose, a 90 degree fitting and 7 adapters.The pressure gaug is clearly legible, has 2 scales, a vent valve, a range of 0 - 70bar (0 - 1000psi) and a flexible hose of 360mm with a quick coupling at the end. The 7 adapters can easily be connected here. The 90 degree fitting ensures that hard to reach places are also accessible.Furthermore, the compression meter is equipped with a built-in resetter.
Spark plug adapters:
M10 x 1.0 x 68mm
M10 x 1.25 x 54mm
M10 x 1.25 x 68mm
M12 x 1.25 x 45mm
Nozzle adapters:
M18 x 1.5
M24 x 1.5
M24 x 2.0
Bördelgerät Satz 5
This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.
pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm
pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
pipe cutter
Tragbare Luftkompressor mit Tank 12V - 12V- air flow rate = 71L/min @ 0 bar- max. power consumption = 30amp - permanent magnet motor - tank capacity = 5,7ltr - max. working pressure = 105psi / 7bar - duty cycle = 33% - max. surrounding temp. = 70 degrees Celcius - min. surrounding temp. -70 degrees Celcius - automatic shut off valve Including tyre gun, couplers, hose and filters
Ölfilterkappen
This set is suitable for mounting and dismounting almost any oil filter from a large number of types of cars and motorcycles.Caps with 14, 15, 30 and 36P are suitable for all filters from 65mm to 100mm.\
drive = 3/8"
adaptor 1/2" to 3/8"
Sizes caps:
65mm 14P = Toyota / Nissan
65 / 67mm 14P = Ford / Mazda
68mm 14P = Mazda / Ford / Subaru
73mm 14P = Toyota / Audi / Rover / Lexus / Austin
74 / 76mm 15P = VW / Audi / GM / Mercedes / Opel
75 / 77mm 15P = Fiat / Renault
76mm 14P = Motorcraft / Ford
76mm 30P = Fiat / Lancia
80mm 15P = Mazda / Subaru / Toyota / Honda / Nissan
80 / 82mm 15P = Volvo
90mm 15P = Fiat
93mm 15P = Nissan / VW / Porsche / Renault / Honda / Audi
93mm 36P = Ford / Motorcraft
100mm 15P = Isuzu / Mitsubishi
Zierleistenkeile Satz This set is ideal for assembling or disassembling upholstery without damaging the car paint.Various types and models for rubber seals, dashboard, door panels, switches etc.
Drehmomentverstärker
including 2 sockets 32mm and 33mm
- total length = 380mm
- maximum safe output = 5800N/M
- trans-speed ratio = 1:78
- connection = 1''
- total length = 330mm
- maximum safe output = 3800N/M
- trans-speed ratio = 1:58
Hydraulische Abdrucker
This Mammuth bead breaker is suitable for changing tires without removing without removing the wheel by pressing the tire of the rim.
clam capacity = 4 ton
press capacity = 5 ton
use with hydraulic pump, /- 600bar
working range up to 125mm / 5 inch
Drehmoment Vervielfältiger 1/2 zu 3/4 Ausgabe 3:1 - input = 1/2" ( 1.27cm ) drive (f) - max = 460nm/340 ft-lb - output = 3/4" ( 1.9cm ) drive (m) - max = 1400nm/1000ft-lb - output/input = 3/1