This connection kit is suitable for connecting a silent air compressor with an air tank.

Air hose set

This Blubird air hose set is suitable for all kinds of compressed air applications, such as inflating tires. The different couplings makes the set very universal.
The set comes in a handy portable storage bag.

Content:

• 1x air hose rubber:
  - length = 15m
  - inner diameter = 10mm
  - outer diameter = 15mm
  - connection = 1/4" BSPT external thread
  - max. operating pressure = 20bar (300psi)

• 1x air chuck

• 1x air lever blow gun with 1/4" internal thread

• 1x roll of teflon tape of 12m

• 1x universal air coupler male 1/4"

• 1x universal air coupler female 1/4"

• 1x air connector euroline male 1/4"

• 1x air connector euroline female 1/4"

• 1x air connector orion male 1/4"

• 1x air connector orion female 1/4"

Oil for air tools Zion Air B 32

Specially designed for ZION AIR pneumatic tools. Good lubrication by adhesive properties

hose connector T-piece / copper T connector tube / hose connector / lab tee adapter
T-piece brass fitting for 12mm hoses.
The 90° tee, also known as hose connector T-piece, is a fitting with a barb connection. It is used for connecting 3 hoses together. The connector is resistant to corrosion and is manufactured according to European standards.

Technical specifications:

• model = T-piece
• hose connection = 12mm
• material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread 3/4’’ to bigger external BSP thread 1’’ or the other way around.

• Thread type internal = BSP 3/4’’
• Thread type external = BSP 1’’
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread 1/2’’ to bigger external BSP thread 1’’ or the other way around.

• Thread type internal = BSP 1/2’’
• Thread type external = BSP 1’’
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread 3/8’’ to bigger external BSP thread 1’’ or the other way around.

• Thread type internal = BSP 3/8’’
• Thread type external = BSP 1’’
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

hose connector T-piece / copper T connector tube / hose connector / lab tee adapter
T-piece brass fitting for 10mm hoses.
The 90° tee, also known as hose connector T-piece, is a fitting with a barb connection. It is used for connecting 3 hoses together. The connector is resistant to corrosion and is manufactured according to European standards.

Technical specifications:

• model = T-piece
• hose connection = 10mm
• material = brass

hose connector T-piece / copper T connector tube / hose connector / lab tee adapter
T-piece brass fitting for 8mm hoses.
The 90° tee, also known as hose connector T-piece, is a fitting with a barb connection. It is used for connecting 3 hoses together. The connector is resistant to corrosion and is manufactured according to European standards.

Technical specifications:

• model = T-piece
• hose connection = 8mm
• material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread 1/2’’ to bigger external BSP thread 3/4’’ or the other way around.

• Thread type internal = BSP 1/2"
• Thread type external = BSP 3/4"
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread 1/4" to bigger external BSP thread 3/4" or the other way around.

• Thread type internal = BSP 1/4"
• Thread type external = BSP 3/4"
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread ⅛’’ to bigger external BSP thread 3/4’’ or the other way around.

• Thread type internal = BSP ⅛’’
• Thread type external = BSP 3/4’’
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

hose connector T-piece / copper T connector tube / hose connector / lab tee adapter
T-piece brass fitting for 6mm hoses.
The 90° tee, also known as hose connector T-piece, is a fitting with a barb connection. It is used for connecting 3 hoses together. The connector is resistant to corrosion and is manufactured according to European standards.

Technical specifications:

• model = T-piece
• hose connection = 6mm
• material = brass

Slangkoppeling / Gerader Schlauchtülle Messing / Schlauchverbinder gerade aus Messing Tülle Schlauchtülle Gartenschlauchanschluß

For connecting hose to hose. This easy to use hose connector is great for hose repairs and extensions. Cut out the damaged section of hose and insert this fitting securely into each end. Your hose is ready to use again in a flash.
Technical specifications:

• Connection aperture (barb outer diameter) = 12 mm
• Suitable fluid = water, air, oil
• Fluid temperature = -50 - 150 °C
• Working pressure = 3.45 MPa
• Material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread 3/8’’ to bigger external BSP thread 1/2’’ or the other way around.

• Thread type internal = BSP 3/8’’
• Thread type external = BSP 1/2’’
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread 1/2’’ to bigger external BSP thread ¼’’ or the other way around.

• Thread type internal = BSP 1/2’’
• Thread type external = BSP ¼’’
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread ⅛’’ to bigger external BSP thread ¼’’ or the other way around.

• Thread type internal = BSP ⅛’’
• Thread type external = BSP 1/2’’
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass

Collar and gas connector nozzle male / brass gas nozzle / hose barb / hose barb fittings / brass male hose nipple / hose barb fittings
Hose barb fittings are suitable for use with various hose and tubing. The fitting is made of brass, which guarantees excellent strength and ductility, corrosion resistance, good bearing properties, and low magnetic permeability.
Technical specifications:

• Hose connection size: 10mm
• Thread type external: BSP 1/2
• Material = brass
• Temperature range = -20ºC to +70ºC
• Working pressure = 15 bar

Slangkoppeling / Gerader Schlauchtülle Messing / Schlauchverbinder gerade aus Messing Tülle Schlauchtülle Gartenschlauchanschluß

For connecting hose to hose. This easy to use hose connector is great for hose repairs and extensions. Cut out the damaged section of hose and insert this fitting securely into each end. Your hose is ready to use again in a flash.
Technical specifications:

• Connection aperture (barb outer diameter) = 10 mm
• Suitable fluid = water, air, oil
• Fluid temperature = -50 - 150 °C
• Working pressure = 3.45 MPa
• Material = brass

reducing nipple / reducers / hex nipple reducer
This reducing nipple is used to transfer internal BSP thread ⅛’’ to bigger external BSP thread ¼’’ or the other way around.

• Thread type internal = BSP 3/8’’
• Thread type external = BSP ¼’’
• Pressure rating = 30bar
• Operating temperature = 90 - 100C
• Material = brass