Ausdreh Satz für Muttern Bolzen und Schrauben

This set is suitable for removing nuts, bolts and stuck studs.

Content:

• 5 bolt removers for left side thread = M3-M6, M6-M8, M8-M11, M11-M14 and M14-M18

• 4 stud sockets 1/2" drive = 6, 8, 10 and 12mm

• 9 spiral sockets for 6pt nuts 3/8" drive = 10, 11, 12, 13, 14, 15, 16, 17 and 19mm

• material = chrone molybdenum steel

Auspuff Federspanner

Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.

Auspuffgummi Haken

This hook set is used for applying or removing exhaust rubbers.

- 1 curved hook
- 1 flat hook 90 degrees

Auspuffrohr Aufweitungs Satz

This set is suitable for expanding or to re-round the exhaust pipe.

3 expanders:

• 28 to 44mm

• 38 to 63mm

• 54 to 88mm

Bördelgerät Satz 5

This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.

Content:

• pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm

• pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"

• pipe cutter

• spreader

Bremskolbenrückstellsatz

This set is suitable for turning and pushing  back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.
Suitable for almost any car brand.

Content:

• 1 spindle right thread

• 1 spindle left thread

• 2 positioning plates

• 17 adapter plates

Doppelt Leitung Bördelgerät Satz / Bremsleitung Fackelsatz

This flaring set is suitable for double and single flares of copper, aluminum and mild steel brake lines and brass tubes up to 45 degrees.

Content:

• 5 adapters in the sizes = 3/16", 1/4", 5/16", 3/8" and 1/2" (4.8, 6.4, 7.9,9.5 and 12.7mm)

• pipe holder

• spreader

Drehwinkelmesser / Winkelmesser / Winkelmesser Schlüssel

This torque angle gauge is suitable for retightening of cylinder head bolts, among other things, under a certain number of degrees after tightening at a set moment.
The protractor wrench can be used with a torque wrench, ratchet or socket wrench. The scale is clearly legible.
Fixed with the clamping screw and adjustable locking pin.

• 1/2" internal and external

• 360 degrees, series in 2 degrees

Drehwinkel-Messgerät zum Winkelanzug

- for operation in combination with torque wrenches, ratchets, sockets and accessories

- to accurately set the degrees of turn required on certain applications

- drive = 1/2"

- diameter = 90mm

- 0 - 360 degrees, sequences in 2 degrees

Bearing race and seal driver set / seal mounting set

This set is suitable for assembling shafts, bearings and seals without damaging the housing of the shaft. The flanges are made of sturdy aluminum and go up to 81mm. This makes the set suitable for almost all standard wheel bearings. The flat side of the flange is used for the seals and the other side for installing the seal rings. The handle has a ribbed area for extra grip.

Content:

• 1x handle

• 9x aluminum flange = 39,5 / 44,5 / 50 / 59 / 63 / 65 / 72 / 76 and 81mm

• drive = 14mm
  

Coil spring compressor set manual

This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.

• max. working range = 265mm

Gleithammer Satz

This slide hammer set is suitable for internal and external pulling with 2 or 3 legs, as a thru axle puller, wheel hub puller, brake drum puller and sheet metal puller.

Content:

• slide hammer with shaft

• internal puller with 2 and 3 legs

• external puller with 2 and 3 legs

• locking plier adapter

• lip puller

• dent puller

• hub puller

Glühkerzen Demontage Satz / Reparatursatz für Glühkerzen

This set is suitable for removing damaged or hard to reach glow plugs from the cylinder head and repairing damaged threads. Suitable for glow plugs with either an M8 x 1.0 thread or and M10 x 1.0 thread. The expanded set has everything to remove the damaged glow plug without damaging the cylinder head.
The set is specially designed for clearing and cleaning the glow plug bore and sealing seat. Any unwanted carbon can also be removed from the borehole.

Content:

• 1x puller for stuck glow plugs

• 2x step drill = 7 x 5.5mm and 9 x 5.5mm

• 2x HSS drill = 3.5mm

• 3x thread tap = M8 x 1.0 / M10 x 1.0 / 6.3 (1/4") - 28UNF

• 1x T-handle with ratchet function

• 1x E10 torx socket

• 1x drill adapter

• 1x power bolt

• 1x power nut

• 1x Allen key

• 2x centering socket for drill 3.5mm

Bremszylinder Honwerkzeug

This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others.
Suited for cylinders with a diameter of 24 to 63,5mm.

Bremszylinder Honwerkzeug

This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others.
Suited for cylinders with a diameter of 58 to 168mm.

Innen Kugellager Abzieher Satz

This bearing puller set is suitable for disassembling inner bearings. Even the most stuck bearings can be removed with the help of the slide hammer.

Content:

• 1x slide hammer of 940 grams and 380mm long

• 1x internal extractor 12 - 14mm

• 1x internal extractor 14 - 19mm

• 1x internal extractor 18 - 25mm

• 1x internal extractor 25 - 32mm

Innen und Außen Abzieher Satz

This internal and external puller set is suitable for disassembling oil seals and ball bearings, for example. This set comes in a handy plastic transport case.

Content:

• 1x small internal puller 15-30mm

• 1x large internal puller 30-80mm

• 1x external puller 15-80mm

• 1x locking nut

• 1x slidehammer