Ausdreh Satz für Muttern Bolzen und Schrauben
This set is suitable for removing nuts, bolts and stuck studs.
Content:
5 bolt removers for left side thread = M3-M6, M6-M8, M8-M11, M11-M14 and M14-M18
4 stud sockets 1/2" drive = 6, 8, 10 and 12mm
9 spiral sockets for 6pt nuts 3/8" drive = 10, 11, 12, 13, 14, 15, 16, 17 and 19mm
material = chrone molybdenum steel
Auspuff Federspanner Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.
Auspuffgummi Haken This hook set is used for applying or removing exhaust rubbers. - 1 curved hook - 1 flat hook 90 degrees
Auspuffrohr Aufweitungs Satz
This set is suitable for expanding or to re-round the exhaust pipe.
3 expanders:
28 to 44mm
38 to 63mm
54 to 88mm
Bördelgerät Satz 5
This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.
pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm
pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
pipe cutter
spreader
Bremskolbenrückstellsatz
This set is suitable for turning and pushing back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.Suitable for almost any car brand.
1 spindle right thread
1 spindle left thread
2 positioning plates
17 adapter plates
Auto Befestigungsclips / Auto Befestigungen / Push-Clips für Autohalterungen / Auto-Halterungsclips / Auto-Befestigungen Push-Trim-Clips / Niete Clip Plastik Radkästen BefestigungUniversal automotive retainer push clips kit from XPTools are widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, door trims, engine cover and splash shield retainers replacement. These body clips can also be used on cars, trucks, motorcycles, buses, caravans, etc.625 pcs automotive clips and fasteners include 16 kinds of the most common sizes with holes ranging from 5mm to 10mm.All fasteners push retainers packed in a compact size plastic container for easy organization and storage or carrying in the car. Compact size, convenient to store or carry within your car.The kit includes a special removal tool, which will help you remove old clips and easily access hard-to-reach places.This push type retainer set is made of high quality plastic material with solid construction to strengthen the fixation and effectively improve accuracy. Technical specifications:
Total 16 different si zes auto clips:
Widely Used:Fender Liner Retainer, Reinforced Panel Retainer, Retainer, Bumper Cover Retainer, Side Shield Retainer, Pkg Tray Trim Pin, Cowl Grille Rivet, Flare Retainer, Cowl Top Panel Rivet, Air Deflector Pin, Trunk Trim Fastener, Air Seal Clip, Shield Pin, Wheelhouse Liner Retainer, Rear Trim Panel Retainer, Air Shield Retainer, Carpet Trim Retainer, Lower Quarter Trim Retainer.Pkg Tray Trim Retainer, Splash Shield Retainer, Wheelhouse Trim Retainer, Bumper Cover Nut, Side AirBag Retainer,Bumper Cover Retainer Clip, Closure Panel Retainer, Floor Duct Retainer, Header Panel Retainer, Latch Assembly Retainer, Trim Panel Clip, Lid Trim Retainer, Molding Retainer, Seal Retainer, Air Duct Pin, Splash Shield Rivet, Carpet Retainer, Servo Retainer, Silencer Retainer, Wheelhouse Cover Retainer, Front Trim Retainer, Rear Trim Retainer, Side Cover Retainer, Insulator Retainer, Center Panel Retainer, Tail Panel Trim Fastener, Closure Panel Pin, Licence Bracket Pin.
Doppelt Leitung Bördelgerät Satz / Bremsleitung Fackelsatz
This flaring set is suitable for double and single flares of copper, aluminum and mild steel brake lines and brass tubes up to 45 degrees.
5 adapters in the sizes = 3/16", 1/4", 5/16", 3/8" and 1/2" (4.8, 6.4, 7.9,9.5 and 12.7mm)
pipe holder
Drehwinkelmesser / Winkelmesser / Winkelmesser Schlüssel
This torque angle gauge is suitable for retightening of cylinder head bolts, among other things, under a certain number of degrees after tightening at a set moment.The protractor wrench can be used with a torque wrench, ratchet or socket wrench. The scale is clearly legible.Fixed with the clamping screw and adjustable locking pin.
1/2" internal and external
360 degrees, series in 2 degrees
Drehwinkel-Messgerät zum Winkelanzug
- for operation in combination with torque wrenches, ratchets, sockets and accessories
- to accurately set the degrees of turn required on certain applications
- drive = 1/2"
- diameter = 90mm
- 0 - 360 degrees, sequences in 2 degrees
Bearing race and seal driver set / seal mounting set
This set is suitable for assembling shafts, bearings and seals without damaging the housing of the shaft. The flanges are made of sturdy aluminum and go up to 81mm. This makes the set suitable for almost all standard wheel bearings. The flat side of the flange is used for the seals and the other side for installing the seal rings. The handle has a ribbed area for extra grip.
1x handle
9x aluminum flange = 39,5 / 44,5 / 50 / 59 / 63 / 65 / 72 / 76 and 81mm
drive = 14mm
Coil spring compressor set manual
This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.
max. working range = 265mm
Gleithammer Satz
This slide hammer set is suitable for internal and external pulling with 2 or 3 legs, as a thru axle puller, wheel hub puller, brake drum puller and sheet metal puller.
slide hammer with shaft
internal puller with 2 and 3 legs
external puller with 2 and 3 legs
locking plier adapter
lip puller
dent puller
hub puller
Glühkerzen Demontage Satz / Reparatursatz für Glühkerzen
This set is suitable for removing damaged or hard to reach glow plugs from the cylinder head and repairing damaged threads. Suitable for glow plugs with either an M8 x 1.0 thread or and M10 x 1.0 thread. The expanded set has everything to remove the damaged glow plug without damaging the cylinder head.The set is specially designed for clearing and cleaning the glow plug bore and sealing seat. Any unwanted carbon can also be removed from the borehole.
1x puller for stuck glow plugs
2x step drill = 7 x 5.5mm and 9 x 5.5mm
2x HSS drill = 3.5mm
3x thread tap = M8 x 1.0 / M10 x 1.0 / 6.3 (1/4") - 28UNF
1x T-handle with ratchet function
1x E10 torx socket
1x drill adapter
1x power bolt
1x power nut
1x Allen key
2x centering socket for drill 3.5mm
Bremszylinder Honwerkzeug This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others. Suited for cylinders with a diameter of 24 to 63,5mm.
Bremszylinder Honwerkzeug This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others. Suited for cylinders with a diameter of 58 to 168mm.
Scheinwerfertester Chassis / H-Base
Scheinwerferprüfstand zur Verwendung mit den Schienen KT01R, KT01A und dem Scheinwerfer-Einstellgerät KT01AL. Die H-Base in Kombination mit der Schiene ist die am besten geeignete Methode, um Scheinwerfer schnell und richtig einzustellen. Mit diesem separaten Fahrgestell können Sie Ihr bisheriges Scheinwerfer-Einstellgerät ganz einfach für den Einsatz an Führungsschienen umrüsten.
Chassis und Schienen erfüllen die umfangreichsten Anforderungen für die Einstellung von Scheinwerfern.
Geeignet für verschiedene Marken von Scheinwerfer-Einstellgeräten einschließlich FLUXON.