Brake line flare set
This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.
Content:
pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm
pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
pipe cutter
spreader
TU-114 Fuel pressure gauge for gasoline engines
This set is suitable for testing the fuel pressure of almost all injection systems, also suitable for injection systems with a Schrader test port.The pressure gauge is clearly legible, has 2 scales, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 410mm.The set consists of a number of adapters and fittings, components which are equipped with a quick coupling and a pressure relief valve. The pressure relief valve is equipped with a drain hose for the safe draining of fuel.
Bearing race and seal driver set / seal mounting set
This set is suitable for assembling shafts, bearings and seals without damaging the housing of the shaft. The flanges are made of sturdy aluminum and go up to 81mm. This makes the set suitable for almost all standard wheel bearings. The flat side of the flange is used for the seals and the other side for installing the seal rings. The handle has a ribbed area for extra grip.
1x handle
9x aluminum flange = 39,5 / 44,5 / 50 / 59 / 63 / 65 / 72 / 76 and 81mm
drive = 14mm
Valve spring plier / valve spring lifter
This heavy duty valve spring compressor is suitable for both old-fashioned and modern cylinder heads with deep-set valves. The valve spring plier is also suitable for larger cylinder heads due to the large lever and robust construction. The valve wedge cam be converted, making the valve spring compressor also suitable for smaller cylinder heads.
clamping range = 35 - 200mm
2 adapters with 25 and 30mm diameter
suitable for +/- 95% of the cars
suitable for both gasoline and diesel engines
Universal caliper wind back kit
This set is suitable for turning and pushing back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.Suitable for almost any car brand.
1 spindle right thread
1 spindle left thread
2 positioning plates
17 adapter plates
Coil spring compressor set manual
This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.
max. working range = 265mm
Exhaust pipe expander kit
This set is suitable for expanding or to re-round the exhaust pipe.
3 expanders:
28 to 44mm
38 to 63mm
54 to 88mm
Oil filter caps / oil filter cap set / oil filter disassembly set
This set is suitable for mounting and dismounting almost any oil filter from a large number of types of cars and motorcycles.Caps with 14, 15, 30 and 36P are suitable for all filters from 65mm to 100mm.\
drive = 3/8"
adaptor 1/2" to 3/8"
Sizes caps:
65mm 14P = Toyota / Nissan
65 / 67mm 14P = Ford / Mazda
68mm 14P = Mazda / Ford / Subaru
73mm 14P = Toyota / Audi / Rover / Lexus / Austin
74 / 76mm 15P = VW / Audi / GM / Mercedes / Opel
75 / 77mm 15P = Fiat / Renault
76mm 14P = Motorcraft / Ford
76mm 30P = Fiat / Lancia
80mm 15P = Mazda / Subaru / Toyota / Honda / Nissan
80 / 82mm 15P = Volvo
90mm 15P = Fiat
93mm 15P = Nissan / VW / Porsche / Renault / Honda / Audi
93mm 36P = Ford / Motorcraft
100mm 15P = Isuzu / Mitsubishi
Chain oil filter wrench / crescent chain wrench Suitable for pipes with a diameter of 70 tot 120mm. The wrench has a length of 400mm and is easy to adjsut and click to 500 and 600mm.
Plastic locking nut assortment
- 30x nut clip for Mitsubishi
- 20x nut clip for Toyota
- 30x nut clip for Toyota and Nissan
- 40x nut clip for Mazda and Nissan
- 25x screw grommet for Mitsubishi
- 40x screw nut for Ford
- 40x headlight nut for Volkswagen and GM
- 20x screw grommet for Toyota
- 25x connecting clip for Mercedes
- 25x screw clip for Renault
- 25x screw grommet for Fiat
Universal puller set
This very extensive universal puller set is suitable for disassembling crankshaft pulleys and crankshaft dampers, among other things. The set is also suitable for the power steering and dynamo pulley. The puller is suitable for pulling with 2 or 3 bolts and the flange is provided with bolt slots.
1x puller flange with 4 holes
1x small centering adapter
1x large centering adapter
1x flat shaft adapter
3x 35mm bolts, M10 x 1,5mm
3x 45mm bolts, M8 x 1,25mm
2x 65mm bolts, M8 x 1,25mm
2x 90mm bolts, M8 x 1,25mm
3x 1-1/2" bolts, 3/8", 24 thread
3x 2" bolts, 3/8", 16 thread
5x 3" bolts, 3/8", 16 thread
2x 4-1/2" bolts, 3/8", 16 thread
2x 6" bolts, 5/16", 18 thread
3x 3-1/2" bolts, 5/16", 18 thread
2x 2-1/2" bolts, 1/4", 28 thread
11x flat rings
Ball joint extractor set
This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.This set comes in a handy plastic transport case.
1x steering fork 17mm opening
1x steering fork 24mm opening
1x steering fork 28mm opening
handle for manual use 200mm long
adapter for pneumatic use 180mm long
Brake cylinder honing device This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others. Suited for cylinders with a diameter of 58 to 168mm.
Valve lapping tool attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8mm shank - min. working speed = 1000rpm - max. working speed = 1250rpm - 4 suction plates = 20, 30, 35 and 45mm - 8mm shaft for attaching the suction cups
Tire bead retainer
- facilitates wheel mounting on rim
- material = fiberglass
Exhaust pipe compressor Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.
Clutch aligning set
This universal centering set is suitable for very accurate and simple centering of the clutch plate on vehicles with top bearing.
1x centering mandrel with screw thread
8x adapter in sizes: 11 x 18mm, 12 x 18mm, 15 x 18mm, 17 x 18mm, 19 x 18mm, 20 x 18mm, 21 x 18mm, 25 x 18mm
1x conical adapter for larger sizes
Rivets en plastique de voiture/kit de rivets automatique/ensemble d'outils de clip de formation de fixation/garnitures de porte de voiture/kit de clips de carrosserie de garniture de voiture/retenues automobiles universelles/clips de retenue de pare-chocs/kit de retenue de poussée de fixations/ensemble de rivets de goupille de poussée automatique/clips d'aile de panneau de garniture de porte/voiture clips intérieurs de panneaux / clips de panneaux de porteLe kit de clips de retenue universels pour automobile de XPTools est largement utilisé pour les garnitures de porte, les jougs de bouclier de radiateur, les ailes, les pare-chocs, les jupes latérales, les calandres, les garnitures de porte, le capot moteur et le remplacement des dispositifs de retenue de pare-éclaboussures. Ces clips de carrosserie peuvent également être utilisés sur les voitures, camions, motos, bus, caravanes, etc.Les 625 clips et fixations automobiles comprennent 16 types de tailles les plus courantes avec des trous allant de 5 mm à 10 mm.Toutes les fixations poussent les dispositifs de retenue emballés dans un récipient en plastique de taille compacte pour une organisation et un stockage faciles ou un transport dans la voiture. Taille compacte, pratique à ranger ou à transporter dans votre voiture.Le kit comprend un outil de retrait spécial, qui vous aidera à retirer les anciens clips et à accéder facilement aux endroits difficiles d'accès.Cet ensemble de retenue de type poussoir est fabriqué en matière plastique de haute qualité avec une construction solide pour renforcer la fixation et améliorer efficacement la précision.Spécifications techniques:Quantité : 625 clips de fixation automobileApplicable: modèles universelsMatériau : PA (polyamide)Couleur : noirTotal de 16 clips automatiques de tailles différentes :30 pièces (10 mm), diamètre de la tête : 20 mm, longueur de la tige : 13 mm ;90 pièces (6,25 mm), diamètre de la tête : 15,2 mm, longueur de la tige : 11 mm ;90 pièces (6 mm) diamètre de la tête du trou : 15,2 mm, longueur de la tige : 12 mm ;70 pièces (7 mm) diamètre de la tête du trou : 13,8 mm, longueur de la tige : 11,4 mm ;25 pièces (8 mm) diamètre de la tête du trou : 16 mm, longueur de la tige : 10 mm ;25 pièces (9 mm) diamètre de la tête du trou : 15 mm, longueur de la tige : 12 mm ;30 pièces (6 mm) diamètre de la tête du trou : 15 mm, longueur de la tige : 13,7 mm ;50 pièces (6,2 mm) diamètre de la tête : 13,8 mm, longueur de la tige : 10 mm ;20 pièces (9 mm) diamètre de la tête du trou : 18,2 mm, longueur de la tige : 16 mm ;50 pièces (5 mm), diamètre de la tête : 18,2 mm, longueur de la tige : 12 mm ;20 pièces (7 mm) diamètre de la tête du trou : 20 mm, longueur de la tige : 10,5 mm ;30 pièces (8 mm) diamètre de la tête du trou : 19 mm, longueur de la tige : 8,5 mm ;25 pièces (8 mm) diamètre de la tête du trou : 20 mm, longueur de la tige : 13 mm ;20 pièces (7,8 mm) diamètre de la tête : 20 mm, longueur de la tige : 10 mm ;30 pièces (9 mm) diamètre de la tête du trou : 19,7 mm, longueur de la tige : 8,7 mm ;20 pièces (9 mm) diamètre de la tête du trou : 17,7 mm, longueur de la tige : 27,6 mm.Fender Liner Retainer, Reinforced Panel Retainer, Retainer, Bumper Cover Retainer, Side Shield Retainer, Pkg Tray Trim Pin, Cowl Grille Rivet, Flare Retainer, Cowl Top Panel Rivet, Air Deflector Pin, Trunk Trim Fastener, Air Seal Clip, Shield Pin, Wheelhouse Liner Retainer, Rear Trim Panel Retainer, Air Shield Retainer, Carpet Trim Retainer, Lower Quarter Trim Retainer.Pkg Tray Trim Retainer, Splash Shield Retainer, Wheelhouse Trim Retainer, Bumper Cover Nut, Side AirBag Retainer,Bumper Cover Retainer Clip, Closure Panel Retainer, Floor Duct Retainer, Header Panel Retainer, Latch Assembly Retainer, Trim Panel Clip, Lid Trim Retainer, Molding Retainer, Seal Retainer, Air Duct Pin, Splash Shield Rivet, Carpet Retainer, Servo Retainer, Silencer Retainer, Wheelhouse Cover Retainer, Front Trim Retainer, Rear Trim Retainer, Side Cover Retainer, Insulator Retainer, Center Panel Retainer, Tail Panel Trim Fastener, Closure Panel Pin, Licence Bracket Pin.
This flaring set is suitable for double and single flares of copper, aluminum and mild steel brake lines and brass tubes up to 45 degrees.
5 adapters in the sizes = 3/16", 1/4", 5/16", 3/8" and 1/2" (4.8, 6.4, 7.9,9.5 and 12.7mm)
pipe holder