Motorcycle special socket

For assembling and disassembling of the full floating axle of a motorcycle.

Suitable for:

- 19mm = Honda

- 22mm = Kawasaki, BMW

- 24mm = Suzuki, Honda, BMW K1, K1000

Torque setting angular gauge

- for operation in combination with torque wrenches, ratchets, sockets and accessories

- to accurately set the degrees of turn required on certain applications

- drive = 1/2"

- diameter = 90mm

- 0 - 360 degrees, sequences in 2 degrees

Oil filter clamp / oil filter wrench / oil filter plier

Suitable for easy replacement of oil filters with a diameter of 63,5 to 98,5mm that are accessible from the front. The 3 arms clamp tightly around the oil filter

• drive = 3/8"

Exhaust rubber hooks

This hook set is used for applying or removing exhaust rubbers.

- 1 curved hook
- 1 flat hook 90 degrees

Protractor wrench / rotational angle gauge

This torque angle gauge is suitable for retightening of cylinder head bolts, among other things, under a certain number of degrees after tightening at a set moment.
The protractor wrench can be used with a torque wrench, ratchet or socket wrench. The scale is clearly legible.
Fixed with the clamping screw and adjustable locking pin.

• 1/2" internal and external

• 360 degrees, series in 2 degrees

Handy remover set

This set is ideal for assembling or disassembling upholstery without damaging the car paint.
Various types and models for rubber seals, dashboard, door panels, switches etc.

Brake cylinder honing device

This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others.
Suited for cylinders with a diameter of 24 to 63,5mm.

Hose clamp pliers set 90 degrees

- for straightforward clamping of flexible hose pipes

- 90 degrees angled for use in confined spaces

- adjustable locking ring with locking function

- for complete stopping on the flow

- the hose is squeezed against the stable surface over a wide area, avoiding damage to the hose

- ideal for maintenance work with petrol, oil, water and anti freeze

- protects against leakage of petrol, oil, water and anti freeze

- suitable for cars, vans, MPV's, commercial vehicles, tractors, agricultural, construction and industrial uses

- temperature resistance of up to 160 degrees celcius

- material = special plastic

- 155mm plier = suitable for a hose diameter of 10mm

- 165mm plier = suitable for a hose diameter of 15mm

- 220mm plier = suitable for a hose diameter of 24mm

Universal windscreen wiper arm puller

- for removing of front and rear wiper arms
- brass pressure sleeve prevents damage to the thread
- 360 degrees rotatable puller arms
- handwheel, no additional tool required
- chrome plated base, press sleeve brass made hardened spindle

Hose clamp pliers set

- for straightforward clamping of flexible hose pipes
- adjustable locking ring with locking function
- for complete stopping on the flow
- the hose is squeezed against the stable surface over a wide area, avoiding damage to the hose
- ideal for maintenance work with petrol, oil, water and anti freeze
- protects against leakage of petrol, oil, water and anti freeze
- suitable for cars, vans, MPV's, commercial vehicles, tractors, agricultural, construction and industrial uses
- temperature resistance of up to 160 degrees celcius
- material = special plastic

- 155mm plier = suitable for a hose diameter of 3 - 15mm
- 185mm plier = suitable for a hose diameter of 6 - 20mm
- 255mm plier = suitable for a hose diameter of 8 - 45mm

Interior clips assortment

This 192-piece assortment box contains interior clips for dashboard panels, door panels and coating of various vehicles such as Chrysler, Ford, GM, Honda, Renault, Toyota and Volkswagen.

Content:

• 30x ø hole = 6,3mm / ø head = 18mm / length = 2,4 - 13,7mm

• 20x ø hole = 6,3mm / ø head = 17,3mm / length = 14,3mm

• 15x ø hole = 7mm / ø head = 19mm / length = 3,2 - 28,5mm

• 20x ø hole = 8mm / ø head = 20mm / length = 11mm

• 20x ø hole = 8mm / ø head = 19mm / length = 2 - 12,5mm

• 12x ø hole = 8mm / ø head = 20mm / length = 20mm

• 20x ø hole = 9mm / ø head = 16mm / length = 1,5 - 13mm

• 10x ø hole = 9mm / ø head = 18mm / length = 28mm

• 10x ø hole = 9,5mm / ø head = 25mm / length = 3 - 14,5mm

• 15x ø hole = 10mm / ø head = 20mm / length = 13mm

• 10x ø hole = 10mm / ø head = 21mm / length = 1 - 20mm

• 10x ø hole = 10mm / ø head = 20mm / length = 18mm

Assorted fir tree fixings

Contains all kinds of fir tree fixings for general applications and vehicles.
Suitable for a number of vehicles: Ford, GM, Mazda, Nissan, Toyota and VW.

Content:
- 30x radiator yoke, fender and bumper shield retainer
- 30x fender and bumper shield retainer
- 15x interior trim panel retainer
- 15x door trim panel retainer
- 50x door weather strip retainer
- 10x bumper fascia retainer
- 35x hood insulation retainer
- 30x fender and bumper shield retainer
- 50x cowl grille retainer
- 25x retainer for battery post cable shield, radiator side air baffle
- 20x retainers
- 30x trim panel retainer

Brake line flare set

This flaring set is suitable for double and single flares of copper, aluminum and mild steel brake lines and brass tubes up to 45 degrees.

Content:

• 5 adapters in the sizes = 3/16", 1/4", 5/16", 3/8" and 1/2" (4.8, 6.4, 7.9,9.5 and 12.7mm)

• pipe holder

• spreader

Rivets en plastique de voiture/kit de rivets automatique/ensemble d'outils de clip de formation de fixation/garnitures de porte de voiture/kit de clips de carrosserie de garniture de voiture/retenues automobiles universelles/clips de retenue de pare-chocs/kit de retenue de poussée de fixations/ensemble de rivets de goupille de poussée automatique/clips d'aile de panneau de garniture de porte/voiture clips intérieurs de panneaux / clips de panneaux de porte
Le kit de clips de retenue universels pour automobile de XPTools est largement utilisé pour les garnitures de porte, les jougs de bouclier de radiateur, les ailes, les pare-chocs, les jupes latérales, les calandres, les garnitures de porte, le capot moteur et le remplacement des dispositifs de retenue de pare-éclaboussures. Ces clips de carrosserie peuvent également être utilisés sur les voitures, camions, motos, bus, caravanes, etc.
Les 625 clips et fixations automobiles comprennent 16 types de tailles les plus courantes avec des trous allant de 5 mm à 10 mm.
Toutes les fixations poussent les dispositifs de retenue emballés dans un récipient en plastique de taille compacte pour une organisation et un stockage faciles ou un transport dans la voiture. Taille compacte, pratique à ranger ou à transporter dans votre voiture.
Le kit comprend un outil de retrait spécial, qui vous aidera à retirer les anciens clips et à accéder facilement aux endroits difficiles d'accès.
Cet ensemble de retenue de type poussoir est fabriqué en matière plastique de haute qualité avec une construction solide pour renforcer la fixation et améliorer efficacement la précision.
Spécifications techniques:

Quantité : 625 clips de fixation automobile
Applicable: modèles universels
Matériau : PA (polyamide)
Couleur : noir
Total de 16 clips automatiques de tailles différentes :

30 pièces (10 mm), diamètre de la tête : 20 mm, longueur de la tige : 13 mm ;
90 pièces (6,25 mm), diamètre de la tête : 15,2 mm, longueur de la tige : 11 mm ;
90 pièces (6 mm) diamètre de la tête du trou : 15,2 mm, longueur de la tige : 12 mm ;
70 pièces (7 mm) diamètre de la tête du trou : 13,8 mm, longueur de la tige : 11,4 mm ;
25 pièces (8 mm) diamètre de la tête du trou : 16 mm, longueur de la tige : 10 mm ;
25 pièces (9 mm) diamètre de la tête du trou : 15 mm, longueur de la tige : 12 mm ;
30 pièces (6 mm) diamètre de la tête du trou : 15 mm, longueur de la tige : 13,7 mm ;
50 pièces (6,2 mm) diamètre de la tête : 13,8 mm, longueur de la tige : 10 mm ;
20 pièces (9 mm) diamètre de la tête du trou : 18,2 mm, longueur de la tige : 16 mm ;
50 pièces (5 mm), diamètre de la tête : 18,2 mm, longueur de la tige : 12 mm ;
20 pièces (7 mm) diamètre de la tête du trou : 20 mm, longueur de la tige : 10,5 mm ;
30 pièces (8 mm) diamètre de la tête du trou : 19 mm, longueur de la tige : 8,5 mm ;
25 pièces (8 mm) diamètre de la tête du trou : 20 mm, longueur de la tige : 13 mm ;
20 pièces (7,8 mm) diamètre de la tête : 20 mm, longueur de la tige : 10 mm ;
30 pièces (9 mm) diamètre de la tête du trou : 19,7 mm, longueur de la tige : 8,7 mm ;
20 pièces (9 mm) diamètre de la tête du trou : 17,7 mm, longueur de la tige : 27,6 mm.
Fender Liner Retainer, Reinforced Panel Retainer, Retainer, Bumper Cover Retainer, Side Shield Retainer, Pkg Tray Trim Pin, Cowl Grille Rivet, Flare Retainer, Cowl Top Panel Rivet, Air Deflector Pin, Trunk Trim Fastener, Air Seal Clip, Shield Pin, Wheelhouse Liner Retainer, Rear Trim Panel Retainer, Air Shield Retainer, Carpet Trim Retainer, Lower Quarter Trim Retainer.
Pkg Tray Trim Retainer, Splash Shield Retainer, Wheelhouse Trim Retainer, Bumper Cover Nut, Side AirBag Retainer,Bumper Cover Retainer Clip, Closure Panel Retainer, Floor Duct Retainer, Header Panel Retainer, Latch Assembly Retainer, Trim Panel Clip, Lid Trim Retainer, Molding Retainer, Seal Retainer, Air Duct Pin, Splash Shield Rivet, Carpet Retainer, Servo Retainer, Silencer Retainer, Wheelhouse Cover Retainer, Front Trim Retainer, Rear Trim Retainer, Side Cover Retainer, Insulator Retainer, Center Panel Retainer, Tail Panel Trim Fastener, Closure Panel Pin, Licence Bracket Pin.

Clutch aligning set

This universal centering set is suitable for very accurate and simple centering of the clutch plate on vehicles with top bearing.

Content:

• 1x centering mandrel with screw thread

• 8x adapter in sizes: 11 x 18mm, 12 x 18mm, 15 x 18mm, 17 x 18mm, 19 x 18mm, 20 x 18mm, 21 x 18mm, 25 x 18mm

• 1x conical adapter for larger sizes

Exhaust pipe compressor

Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.

Valve lapping tool attachment

- facilitates the insertion of valves
- automatic change in direction
- for use with fine grinding paste
- with 8mm shank
- min. working speed = 1000rpm
- max. working speed = 1250rpm
- 4 suction plates = 20, 30, 35 and 45mm
- 8mm shaft for attaching the suction cups