Garage press / bearing press / table press
This Mammuth hydraulic press is suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires power. This compact table model is ideal for lighter work.
The press comes standard with 2 square press blocks with different openings, a hand pump, 2 extensions and hydraulic oil CH22.
Specifications:
capacity = 10 ton
stroke = 150mm
working range = 158 - 462mm
1x short round extension = 125 x 40 x 40mm
1x long round extension = 325 x 40 x 40mm
Dimensions 2 square press blocks:
opening small round part = 38mm
opening large round part = 58mm
opening small triangle part = 50mm
opening large triangle part = 80mm
Garagepress / bearing press / frame press / table press
This Mammuth hydraulic press is suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires power. The press is of high quality and very stable thanks to the fully welded heavy frame. The working bed is easily manually in height adjustable. The press can be operated with the handle and pump, which has two speeds. The hydraulic cylinder is equipped with a height adjustable, 7,5cm long spindle. The pressure is read via the integrated pressure gauge.
Comes standard with a hydraulic hand pump, 2 heavy press blocks, 8 press pins, a parts tray and hydraulic oil CH22.
capacity = 15 ton
cylinder stroke = 170mm
diameter cylinder = 50mm
bed width = 440mm
bed depth = 165mm
working range = 340mm
screw thread length = 75mm
Garagepress / bearing press / frame press
This Mammuth hydraulic press is suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires power. The press is of high quality and very stable thanks to the fully welded heavy frame. The working bed is easily manually in height adjustable using the hand winch. The press can be operated with the handle and pump, which has two speeds. The hydraulic cylinder is equipped with a height adjustable, 7,5cm long spindle. The pressure is read via the integrated pressure gauge.
capacity = 20 ton
cylinder stroke = 220mm
bed width = 540mm
working range = 850mm
Hydraulikpresse This high quality Mammuth shop press is very stable because of the heavy steel construction. The press is entirely welded. Includes two heavy duty press plates. The hight is adjustable with two locking pins with safety clips. - capacity = 20 ton - cylinder stroke = 185mm - working range = 35 - 912mm - bed width = 510mm This shop press comes oil-filled.
Hydraulikpresse This high quality Mammuth shop press is very stable because of the heavy steel construction. The press is entirely welded. Includes two heavy duty press plates. The hight is adjustable with two locking pins with safety clips. - capacity = 30 ton - cylinder stroke = 150mm - working range = 151 - 1031mm - bed width = 535mm This shop press comes oil-filled.
Press / Garage press / bearing press / workshop press
This Mammuth press is extremely suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other press work where great force is required. The press has a fully welded solid frame. The pressure in kilograms can be clearly read on the integrated pressure gauge. The hydraulic cylinder can be moved in width (with bearings). The cylinder is also equipped with an interchangeable recording press head and integrated hydraulic two-stage pump. This built-in two-stage system provides a large stroke at low back pressure and a small controllable stroke at higher back pressure, so pressing work can be performed accurately. The work bed is easy to adjust in height using the winch. Thanks to the pneumatic pump system, the press can be operated with compressed air via the foot pedal or by hand.
The press comes standard with two multifunctional press blocks and a parts tray.
Technical specifications
capacity = 100 tons
working air pressure = 8-12 bar
bed width = 850mm
bed depth = 280mm
minimum distance bed/cylinder = 185mm
cylinder stroke = 300mm
This Mammuth press is extremely suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other press work where great force is required. The press has a fully welded solid frame. The pressure in kilograms can be clearly read on the pressure gauge. The hydraulic cylinder can be moved in width (with bearings). The cylinder is also equipped with an interchangeable recording press head and integrated hydraulic two-stage pump. This built-in two-stage system provides a large stroke at low back pressure and a small controllable stroke at higher back pressure, so pressing work can be performed accurately. Thanks to the pneumatic pump system, the press can be operated with compressed air via the foot pedal or by hand.
The press is supplied as standard with two multifunctional press blocks.
capacity = 30 tons
working air pressure = 0.9-1.2Mpa
bed depth = 148mm
minimum distance bed/cylinder = 75mm
cylinder stroke = 180mm
This Mammuth press is extremely suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other press work where great force is required. The press has a fully welded solid frame. The pressure in kilograms can be clearly read on the pressure gauge. The hydraulic cylinder is equipped with an exchangeable recording press head and integrated hydraulic two-stage pump. This built-in two-stage system provides a large stroke at low back pressure and a small controllable stroke at higher back pressure, so pressing work can be performed accurately.
capacity = 20 tons
bed depth = 134mm
minimum distance bed/cylinder = 48mm
This Mammuth press is extremely suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other press work where great force is required. The press has a fully welded solid frame. The pressure in kilograms can be clearly read on the pressure gauge. The hydraulic cylinder can be moved in width (with bearings). The cylinder is also equipped with an interchangeable recording press head and integrated hydraulic two-stage pump. This built-in two-stage system provides a large stroke at low back pressure and a small controllable stroke at higher back pressure, so pressing work can be performed accurately.
This Mammuth press is extremely suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other press work where great force is required. The press has a fully welded solid frame. The pressure in kilograms can be clearly read on the integrated pressure gauge. The hydraulic cylinder can be moved in width (with bearings). The cylinder is also equipped with an interchangeable recording press head and integrated hydraulic two-stage pump. This built-in two-stage system provides a large stroke at low back pressure and a small controllable stroke at higher back pressure, so pressing work can be performed accurately. The work bed is easy to adjust in height using the winch.
The press comes standard with two multifunctional press blocks and storage space for tools.
capacity = 50 tons
bed width = 750mm
bed depth = 200mm
minimum distance bed/cylinder = 120mm
cylinder stroke = 200mm
Press / garage press / bearing press
This Mammuth workshop press is of high quality and very stable thanks to the fully welded heavy frame. The work bed is easily adjustable in height manually with the help of the hand winch. The press can be operated with the handle and pump (has two speeds) and with a foot pedal on compressed air. The hydraulic cylinder can be moved in width (with bearings) and is fitted with a height-adjustable spindle, which is 7.5 cm long. The discharge pressure is read via the integrated pressure gauge.
Comes with 2 heavy press blocks, 8 press pins and a parts tray.