Categories

Electric shop press with hand winch 50 ton [SP50HEL] Electric shop press with hand winch 50 ton
mm mm mm Kg

Garage press / bearing press / frame press

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

  • capacity = 50 ton

  • cylinder stroke = 200mm

  • bed width = 730mm

  • working range = 1018mm

  • power = 1,5kW

  • voltage = 400V

  • speed = 1400rpm

  • outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

  • incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
98,8 x 31,5 x 202cm 328kg
52,5 x 36,5 x 79cm 85kg

Shop equipment / Shop presses / Electric hydraulic shop presses Mammuth SP50HEL 8720028057900
€ 3,932.50 Incl. VAT https://schema.org/InStock
€ 3,932.50 3932.5 EUR
Electric shop press with hand winch 75 ton [SP75HEL] Electric shop press with hand winch 75 ton
mm mm mm Kg

Garage press / bearing press / frame press

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

  • capacity = 75 ton

  • cylinder stroke = 250mm

  • bed width = 800mm

  • bed depth = 280mm

  • working range = 945mm

  • power = 1,5kW

  • voltage = 400V

  • speed = 1400rpm

  • outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

  • incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
109 x 32,5 x 204cm 463kg
52,5 x 36,5 x 79cm 85kg

Shop equipment / Shop presses / Electric hydraulic shop presses Mammuth SP75HEL 8720028057870
€ 4,719.00 Incl. VAT https://schema.org/SoldOut
€ 4,719.00 4719.0 EUR
Electric shop press with hand winch 100 ton [SP100HEL] Electric shop press with hand winch 100 ton
mm mm mm Kg

Garage press / bearing press / frame press

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle. The cylinder can also be slid from left to right using the same handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

  • capacity = 100 ton

  • cylinder stroke = 300mm

  • bed width = 800mm

  • bed depth = 342mm

  • working range = 945mm

  • power = 1,5kW

  • voltage = 400V

  • speed = 1400rpm

  • outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

  • incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
115 x 42 x 216cm 735kg
52,5 x 36,5 x 79cm 85kg

Shop equipment / Shop presses / Electric hydraulic shop presses Mammuth SP100HEL 8720028072774
€ 6,050.00 Incl. VAT https://schema.org/InStock
€ 6,050.00 6050.0 EUR
Electric shop press with hand winch 150 ton [SP150HEL] Electric shop press with hand winch 150 ton
mm mm mm Kg

Garage press / bearing press / frame press

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle. The cylinder can also be slid from left to right using the same handle.

The press comes standard with a safety grille, foot pedal and an emergency stop.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

  • capacity = 150 ton

  • cylinder stroke = 350mm

  • bed width = 1000mm

  • bed depth = 460mm

  • working range = 945mm

  • power = 1,5kW

  • voltage = 400V

  • speed = 1400rpm

  • outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

  • incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
138 x 56,5 x 225cm 1200kg
52,5 x 36,5 x 79cm 85kg

Note: This press comes without press blocks. Look below at related items for the relevant press blocks.

Shop equipment / Shop presses / Electric hydraulic shop presses Mammuth SP150HEL 8720028058396
€ 8,772.50 Incl. VAT https://schema.org/SoldOut
€ 8,772.50 8772.5 EUR