Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = H flame

• thickness = FLF, DIN shape for tungsten carbide burrs

• diameter milling part = 12.7mm

• diameter shaft part = 6mm

• length of milling part = 32mm

• total length = 77mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = G tree pointed

• thickness = SPG, DIN shape for tungsten carbide burrs

• diameter milling part = 12.7mm

• diameter shaft part = 6mm

• length of milling part = 25mm

• total length = 70mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = C cylindrical with ball-nose

• thickness = WRC, DIN shape for tungsten carbide burrs

• diameter milling part = 12,7mm

• diameter shaft part = 6mm

• length of milling part = 25mm

• total length = 70mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = B cylindrical with end cut

• thickness = ZYAS, DIN shape for tungsten carbide burrs

• diameter milling part = 12,7mm

• diameter shaft part = 6mm

• length of milling part = 25mm

• total length = 70mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = M cone

• thickness = SKM, DIN shape for tungsten carbide burrs

• diameter milling part = 12.7mm

• diameter shaft part = 6mm

• length of milling part = 22mm

• total length = 71mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = M cone

• thickness = SKM, DIN shape for tungsten carbide burrs

• diameter milling part = 9.6mm

• diameter shaft part = 6mm

• length of milling part = 16mm

• total length = 64mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = L ball-nosed cone

• thickness = KEL, DIN shape for tungsten carbide burrs

• diameter milling part = 12.7mm

• diameter shaft part = 6mm

• length of milling part = 32mm

• total length = 77mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = F ball-nosed tree

• thickness = RBF, DIN shape for tungsten carbide burrs

• diameter milling part = 12.7mm

• diameter shaft part = 6mm

• length of milling part = 25mm

• total length = 70mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = F ball-nosed tree

• thickness = RBF, DIN shape for tungsten carbide burrs

• diameter milling part = 9.6mm

• diameter shaft part = 6mm

• length of milling part = 19mm

• total length = 64mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = A cylindrical without end cut

• thickness = ZYA, DIN shape for tungsten carbide burrs

• diameter milling part = 12,7mm

• diameter shaft part = 6mm

• length of milling part = 25mm

• total length = 70mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = G tree pointed

• thickness = SPG, DIN shape for tungsten carbide burrs

• diameter milling part = 9.6mm

• diameter shaft part = 6mm

• length of milling part = 19mm

• total length = 64mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = D ball shape

• thickness = KUD, DIN shape for tungsten carbide burrs

• diameter milling part = 12,7mm

• diameter shaft part = 6mm

• length of milling part = 11mm

• total length = 56mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = C cylindrical with ball-nose

• thickness = WRC, DIN shape for tungsten carbide burrs

• diameter milling part = 9.6mm

• diameter shaft part = 6mm

• length of milling part = 19mm

• total length = 64mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = A cylindrical without end cut

• thickness = ZYA, DIN shape for tungsten carbide burrs

• diameter milling part = 9.6mm

• diameter shaft part = 6mm

• length of milling part = 19mm

• total length = 64mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = B cylindrical with end cut

• thickness = ZYAS, DIN shape for tungsten carbide burrs

• diameter milling part = 9.6mm

• diameter shaft part = 6mm

• length of milling part = 19mm

• total length = 64mm

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = D ball shape

• thickness = KUD, DIN shape for tungsten carbide burrs

• diameter milling part = 9.6mm

• diameter shaft part = 6mm

• length of milling part = 8mm

• total length = 54mm