This charger is suitable for the work light LB10LIS.
12V
1A
This charger is suitable for the work light LB30BAT.
20V
1,4A
This charger + USB cable is suitable for the work lights WL04CM and WL04UV.
5V
1,2A
This charger + USB cable is suitable for the work lights WL04WB and LB05BAL.
Fuse holder waterproof - incl. fuse Suitable for the following LED lights: LB12VB, LB12VS, LB60V6 and LB80VR.
Loose connection cable Suitabel for the following LED lights: LB12VB, LB12VS, LB60V6 and LB80VR.
Mounting clamp offroad lights Suitable for the following models offroad lights: LB12VB, LB12VS, LB60V6, LB120VB12 and LB180VB18.
Mounting rubber
- flat
- suitable for LB15RL
- round
Remote control
Suitable for both LED offroad bars: LB120VB12 and LB180VB18.
Splitter
2 pole from 1 to 2 plugs. Suitable for the LED lamps LB55V12 and LB12VE.
Universal power adapter
This universal AC/DC adapter is ideal for connecting various devices to the mains supply to power or charge them. The adapter comes with 6 interchangeable plugs and is easy to set to 7 different voltages.
Technical specifications:
voltage in = 100~240V / 50-60Hz
voltage off =
- 3.0V DC @ 1A, 3W
- 4.5V DC @ 1A, 4.5W
- 5.0V DC @ 1A, 5W
- 6.0V DC @ 1A, 6W
- 7.5V DC @ 1A, 7.5W
- 9.0V DC @ 1A, 9W
- 12.0V DC @ 1A, 12W
current = 250mA
max efficiency = 72.5%
cable length = 1,8m
Suitable for the lamps LB10LIS, LB10BAS, WL04CM, WL04UV and ML50LED. Also suitable for the LED lighting 8W for workshop modules GC8WLED, it is possible to connect 3 of these LED bars to 1 adapter.
Note: The polarity is reversible, make sure it is set correctly.
Dimensions of interchangeable plugs:
2.5mm
3.5mm
DC 3.5 x 1.35mm
DC 5.0 x 2.1mm
DC 5.5 x 1.5mm
DC 5.5 x 2.5mm
Wire harness Suitable for the LB120VB12 LED offroad light.
Wire harness Suitable for the LB180VB18 LED offroad light.
Wiring harness
Suitable for connecting 2 LED lamps with 1 wiring harness, such as the LB55V12 and the LB12VE.
Including:
built-in switch
cable eyes M6 plus and minus
connector for connecting the lamps
relay