Slide hammer set

This slide hammer set is suitable for internal and external pulling with 2 or 3 legs, as a thru axle puller, wheel hub puller, brake drum puller and sheet metal puller.

Content:

• slide hammer with shaft

• internal puller with 2 and 3 legs

• external puller with 2 and 3 legs

• locking plier adapter

• lip puller

• dent puller

• hub puller

Brake line flare set

This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.

Content:

• pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm

• pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"

• pipe cutter

• spreader

TU-114 Fuel pressure gauge for gasoline engines

This set is suitable for testing the fuel pressure of almost all injection systems, also suitable for injection systems with a Schrader test port.
The pressure gauge is clearly legible, has 2 scales, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 410mm.
The set consists of a number of adapters and fittings, components which are equipped with a quick coupling and a pressure relief valve. The pressure relief valve is equipped with a drain hose for the safe draining of fuel.

Ball joint extractor set

This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.
This set comes in a handy plastic transport case.

Content:

• 1x steering fork 17mm opening

• 1x steering fork 24mm opening

• 1x steering fork 28mm opening

• handle for manual use 200mm long

• adapter for pneumatic use 180mm long

Protractor wrench / rotational angle gauge

This torque angle gauge is suitable for retightening of cylinder head bolts, among other things, under a certain number of degrees after tightening at a set moment.
The protractor wrench can be used with a torque wrench, ratchet or socket wrench. The scale is clearly legible.
Fixed with the clamping screw and adjustable locking pin.

• 1/2" internal and external

• 360 degrees, series in 2 degrees

Oil filter caps / oil filter cap set / oil filter disassembly set

This set is suitable for mounting and dismounting almost any oil filter from a large number of types of cars and motorcycles.
Caps with 14, 15, 30 and 36P are suitable for all filters from 65mm to 100mm.\

• drive = 3/8"

• adaptor 1/2" to 3/8"

Sizes caps:

• 65mm 14P = Toyota / Nissan

• 65 / 67mm 14P = Ford / Mazda

• 68mm 14P = Mazda / Ford / Subaru

• 73mm 14P = Toyota / Audi / Rover / Lexus / Austin

• 74 / 76mm 15P = VW / Audi / GM / Mercedes / Opel

• 75 / 77mm 15P = Fiat / Renault

• 76mm 14P = Motorcraft / Ford

• 76mm 30P = Fiat / Lancia

• 80mm 15P = Mazda / Subaru / Toyota / Honda / Nissan

• 80 / 82mm 15P = Volvo

• 90mm 15P = Fiat

• 93mm 15P = Nissan / VW / Porsche / Renault / Honda / Audi

• 93mm 36P = Ford / Motorcraft

• 100mm 15P = Isuzu / Mitsubishi
  

Handy remover set

This set is ideal for assembling or disassembling upholstery without damaging the car paint.
Various types and models for rubber seals, dashboard, door panels, switches etc.

Bearing puller set
This bearing puller set is suited for the loosening of bearings, bolts, nuts and pulleys.

• capacity = 20 - 100mm
  

Content:

• 1x bearing separator

• 4x main rod

• 1x H-beam

• 1x hydraulic ram

• 1x extension rod
  

Internal and external puller set

This internal and external puller set is suitable for disassembling oil seals and ball bearings, for example. This set comes in a handy plastic transport case.

Content:

• 1x small internal puller 15-30mm

• 1x large internal puller 30-80mm

• 1x external puller 15-80mm

• 1x locking nut

• 1x slidehammer

Bearing puller set

This bearing puller set is suited for the loosening of bearings, inner rings, bolts, nuts and pulleys.

Content:

• 1 bearing splitter 30-50mm (1-1/4"  -  2-1/4")

• 1 bearing splitter 50-75mm (2-1/4"  -  3-1/4")

• H-type puller head

• forcing screw

• 2x 4" extension screw external and internal

• 2x 5" extension screw external and internal

• 2x 4" extension screw external

• 2x 5" extension screw external

Headlight tester rail / guide rails

Rails suitable for Headlight Tester KT01RB H-Base KT01A and KT01AL Headlight Adjustment Equipment . The rails, in combination with the H-Base, is the most suitable way to adjust headlights quickly and correctly.

The chassis and rails meet the most extensive requirements for adjusting headlights.

Suitable for various different brands of headlight adjusters including FLUXON.

Technical specifications

• length = 3500mm

Headlight tester chassis / H-Base

Headlight tester base to be used for the KT01R rails, KT01A and the KT01AL Headlight adjustment equipment. The H-Base in combination with rail is the most suitable way to adjust headlights quickly and correctly. With this separate chassis you can easily convert your current headlight adjustment device so that it can be used on guide rails.

The chassis and rails meet the most extensive requirements for adjusting headlights.

Suitable for various different brands of headlight adjusters including FLUXON.

Rivets en plastique de voiture/kit de rivets automatique/ensemble d'outils de clip de formation de fixation/garnitures de porte de voiture/kit de clips de carrosserie de garniture de voiture/retenues automobiles universelles/clips de retenue de pare-chocs/kit de retenue de poussée de fixations/ensemble de rivets de goupille de poussée automatique/clips d'aile de panneau de garniture de porte/voiture clips intérieurs de panneaux / clips de panneaux de porte
Le kit de clips de retenue universels pour automobile de XPTools est largement utilisé pour les garnitures de porte, les jougs de bouclier de radiateur, les ailes, les pare-chocs, les jupes latérales, les calandres, les garnitures de porte, le capot moteur et le remplacement des dispositifs de retenue de pare-éclaboussures. Ces clips de carrosserie peuvent également être utilisés sur les voitures, camions, motos, bus, caravanes, etc.
Les 625 clips et fixations automobiles comprennent 16 types de tailles les plus courantes avec des trous allant de 5 mm à 10 mm.
Toutes les fixations poussent les dispositifs de retenue emballés dans un récipient en plastique de taille compacte pour une organisation et un stockage faciles ou un transport dans la voiture. Taille compacte, pratique à ranger ou à transporter dans votre voiture.
Le kit comprend un outil de retrait spécial, qui vous aidera à retirer les anciens clips et à accéder facilement aux endroits difficiles d'accès.
Cet ensemble de retenue de type poussoir est fabriqué en matière plastique de haute qualité avec une construction solide pour renforcer la fixation et améliorer efficacement la précision.
Spécifications techniques:

Quantité : 625 clips de fixation automobile
Applicable: modèles universels
Matériau : PA (polyamide)
Couleur : noir
Total de 16 clips automatiques de tailles différentes :

30 pièces (10 mm), diamètre de la tête : 20 mm, longueur de la tige : 13 mm ;
90 pièces (6,25 mm), diamètre de la tête : 15,2 mm, longueur de la tige : 11 mm ;
90 pièces (6 mm) diamètre de la tête du trou : 15,2 mm, longueur de la tige : 12 mm ;
70 pièces (7 mm) diamètre de la tête du trou : 13,8 mm, longueur de la tige : 11,4 mm ;
25 pièces (8 mm) diamètre de la tête du trou : 16 mm, longueur de la tige : 10 mm ;
25 pièces (9 mm) diamètre de la tête du trou : 15 mm, longueur de la tige : 12 mm ;
30 pièces (6 mm) diamètre de la tête du trou : 15 mm, longueur de la tige : 13,7 mm ;
50 pièces (6,2 mm) diamètre de la tête : 13,8 mm, longueur de la tige : 10 mm ;
20 pièces (9 mm) diamètre de la tête du trou : 18,2 mm, longueur de la tige : 16 mm ;
50 pièces (5 mm), diamètre de la tête : 18,2 mm, longueur de la tige : 12 mm ;
20 pièces (7 mm) diamètre de la tête du trou : 20 mm, longueur de la tige : 10,5 mm ;
30 pièces (8 mm) diamètre de la tête du trou : 19 mm, longueur de la tige : 8,5 mm ;
25 pièces (8 mm) diamètre de la tête du trou : 20 mm, longueur de la tige : 13 mm ;
20 pièces (7,8 mm) diamètre de la tête : 20 mm, longueur de la tige : 10 mm ;
30 pièces (9 mm) diamètre de la tête du trou : 19,7 mm, longueur de la tige : 8,7 mm ;
20 pièces (9 mm) diamètre de la tête du trou : 17,7 mm, longueur de la tige : 27,6 mm.
Fender Liner Retainer, Reinforced Panel Retainer, Retainer, Bumper Cover Retainer, Side Shield Retainer, Pkg Tray Trim Pin, Cowl Grille Rivet, Flare Retainer, Cowl Top Panel Rivet, Air Deflector Pin, Trunk Trim Fastener, Air Seal Clip, Shield Pin, Wheelhouse Liner Retainer, Rear Trim Panel Retainer, Air Shield Retainer, Carpet Trim Retainer, Lower Quarter Trim Retainer.
Pkg Tray Trim Retainer, Splash Shield Retainer, Wheelhouse Trim Retainer, Bumper Cover Nut, Side AirBag Retainer,Bumper Cover Retainer Clip, Closure Panel Retainer, Floor Duct Retainer, Header Panel Retainer, Latch Assembly Retainer, Trim Panel Clip, Lid Trim Retainer, Molding Retainer, Seal Retainer, Air Duct Pin, Splash Shield Rivet, Carpet Retainer, Servo Retainer, Silencer Retainer, Wheelhouse Cover Retainer, Front Trim Retainer, Rear Trim Retainer, Side Cover Retainer, Insulator Retainer, Center Panel Retainer, Tail Panel Trim Fastener, Closure Panel Pin, Licence Bracket Pin.