Brake line flare set
This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.
Content:
pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm
pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
pipe cutter
spreader
TU-114 Fuel pressure gauge for gasoline engines
This set is suitable for testing the fuel pressure of almost all injection systems, also suitable for injection systems with a Schrader test port.The pressure gauge is clearly legible, has 2 scales, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 410mm.The set consists of a number of adapters and fittings, components which are equipped with a quick coupling and a pressure relief valve. The pressure relief valve is equipped with a drain hose for the safe draining of fuel.
Ball joint extractor set
This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.This set comes in a handy plastic transport case.
1x steering fork 17mm opening
1x steering fork 24mm opening
1x steering fork 28mm opening
handle for manual use 200mm long
adapter for pneumatic use 180mm long
Protractor wrench / rotational angle gauge
This torque angle gauge is suitable for retightening of cylinder head bolts, among other things, under a certain number of degrees after tightening at a set moment.The protractor wrench can be used with a torque wrench, ratchet or socket wrench. The scale is clearly legible.Fixed with the clamping screw and adjustable locking pin.
1/2" internal and external
360 degrees, series in 2 degrees
Oil filter caps / oil filter cap set / oil filter disassembly set
This set is suitable for mounting and dismounting almost any oil filter from a large number of types of cars and motorcycles.Caps with 14, 15, 30 and 36P are suitable for all filters from 65mm to 100mm.\
drive = 3/8"
adaptor 1/2" to 3/8"
Sizes caps:
65mm 14P = Toyota / Nissan
65 / 67mm 14P = Ford / Mazda
68mm 14P = Mazda / Ford / Subaru
73mm 14P = Toyota / Audi / Rover / Lexus / Austin
74 / 76mm 15P = VW / Audi / GM / Mercedes / Opel
75 / 77mm 15P = Fiat / Renault
76mm 14P = Motorcraft / Ford
76mm 30P = Fiat / Lancia
80mm 15P = Mazda / Subaru / Toyota / Honda / Nissan
80 / 82mm 15P = Volvo
90mm 15P = Fiat
93mm 15P = Nissan / VW / Porsche / Renault / Honda / Audi
93mm 36P = Ford / Motorcraft
100mm 15P = Isuzu / Mitsubishi
Handy remover set This set is ideal for assembling or disassembling upholstery without damaging the car paint. Various types and models for rubber seals, dashboard, door panels, switches etc.
Bearing puller set This bearing puller set is suited for the loosening of bearings, bolts, nuts and pulleys.
capacity = 20 - 100mm
1x bearing separator
4x main rod
1x H-beam
1x hydraulic ram
1x extension rod
Internal and external puller set
This internal and external puller set is suitable for disassembling oil seals and ball bearings, for example. This set comes in a handy plastic transport case.
1x small internal puller 15-30mm
1x large internal puller 30-80mm
1x external puller 15-80mm
1x locking nut
1x slidehammer
Bearing puller set This bearing puller set is suited for the loosening of bearings, inner rings, bolts, nuts and pulleys. Content:
1 bearing splitter 30-50mm (1-1/4" - 2-1/4")
1 bearing splitter 50-75mm (2-1/4" - 3-1/4")
H-type puller head
forcing screw
2x 4" extension screw external and internal
2x 5" extension screw external and internal
2x 4" extension screw external
2x 5" extension screw external
Headlight tester set / headlight adjustment set
This headlight tester set includes rails, H-base and headlight tester. The headlight tester set is suitable for testing the headlights of cars, motorcycles and heavier vehicles. This is for the purpose of inspection and correct adjustment of the headlights. The professional headlight adjustment device has a built-in laser and a digital lux meter. The height is easy to adjust and the device has a rotating mirror. The dip in the dim/fog light can be read with an accuracy of 0,1%, the total adjustment range is -0,2 / +8%. Also comes with a mobile undercarriage and can be used on rails and mobile.
min. working height = 200mm
max. working height = 1500mm
Features:
glass lens
built-in laser
mirror visor
digital lux meter
level
8% infinitely adjustable inclination angle
sliding mechanism to adjust the height
suitable for APK