Portable bead breaker / combi bead breaker
This Mammuth bead breaker is suitable for changing tires without removing without removing the wheel by pressing the tire of the rim.
clam capacity = 4 ton
press capacity = 5 ton
use with hydraulic pump, /- 600bar
working range up to 125mm / 5 inch
Rim clamp jaw set for tyre changers.Indispensable tool that simplifies the assembly of tyres on small rims 6”, 8”, 10”.Recommended for motorcycles.Made in tempered steel.Suplied including UT40013 so it can be used on tyre changers with curved grip as well.
This Utilnova universal quick head change kit is suitable for all types of tyre changers with an axle size of 29mm, except coats. The set is designed for use with both types of rims, steel and aluminum. Only a simple twist is needed to change from iron head to plastic.
With the help of this set the heads are easily changed and therefore you will always use the plastic head for aluminum rims and the iron head for steel rims.
axle size = 29mm
one-time calibration with a 16 inch rim
This Utilnova universal quick head change kit is suitable for all types of tyre changers with an axle size of 30mm, except coats. The set is designed for use with both types of rims, steel and aluminum. Only a simple twist is needed to change from iron head to plastic.
axle size = 30mm
This Utilnova universal quick head change kit is suitable for all types of tyre changers with an axle size of 28mm, except coats. The set is designed for use with both types of rims, steel and aluminum. Only a simple twist is needed to change from iron head to plastic.
axle size = 28mm
Universal kit special for motorcycle wheels to work with the same tyre changer using a plastic head for aluminium rims and an iron head for steel rims. Manufactured in tempered steel, thus ensuring resistance and qualityIt comprises three safety systems.One-time calibration with a 15-16” rim
Air booster big - volume = 30ltr - pressure = 6 - 8 bar
Air booster small - volume = 18ltr - pressure = 6 - 8bar
This Utilnova tire mounting ring is made of rubber and is very strong and elastic.
Using the ring, tires that have been stacked for a long time are easily inflated again and mounted on the rim.
suitable for rims of 22,5 to 24 inches
This Utilnova professional tire bead press is suitable for dismantling all types of tires. Even the most difficult tires can be dismantled easily, such as run flat, low profile and SSR.
suitable for rims of 19 to 21 inches
suitable for rims of 14 to 18 inches
suitable for rims of 10 to 13 inches
Adapter set motorcycle tyre changer
- 4 pieces
- suitable for tyre changers BL202B and BL204B.
Motorcycle clamps Suitable for the tyre changers ZH620, ZH626, ZH650 and ZH650F.
Aluminum head tongue with protector / mount- demounting head - diameter hole = 30mm Suitable for all Trainsway tyre changers
This Utilnova replacement plastic mounting head is suitable for motorcycle tires and comes without adapter plate.
distance of variable holes = 70 - 80mm
prevents scratches on aluminum rims
suitable for smaller tires of motorcycles, quads and trailers
material = nylon
Utilnova Protected Vulcanised Tyre Lever 50cm
The Utilnova protected vulcanised tyre lever 50cm allows you to (un)mount your tires with ease. It not only avoids scratching the aluminium rims, but also significantly decreases the possibility of breaking a bead. Made with enhanced angles, the performance of this tyre lever is unrivaled. Made of steel, this tyre lever offers exceptional durability and longevity. All the materials are sourced from Spain, ensuring premium quality and reliability.
This Utilnova universal adapter is used to work with aluminum rims and is suitable for the REF04 plastic mounting head.
diameter = 30mm
diameter = 28mm