New productsWe are constantly on the lookout for new and innovative products! After they have been explicitly tested and improved by our Product Team, they will be added to the assortment. The latest new products can be found on this page.
We are constantly on the lookout for new and innovative products! After they have been explicitly tested and improved by our Product Team, they will be added to the assortment. The latest new products can be found on this page.
Ii-ion impact driver with brushless motor / cordless impact tool /brushless impact wrench / Li-Ion impact wrench / short shaft cordless impact wrenchThis Fluxon cordless impact wrench model has many special features and is a great find for professionals who need a small and powerful machine. This tool is distinguished by autonomy and light weight, ergonomic handle, and thanks to the short shaft it can be used in tight places where high torque is required.The efficient brushless motor ensures a high lifetime and also allows precise stepless speed control through the trigger of the impact wrench.Powered by a 20V, 4.0Ah capacity Li-Ion battery which provides lots of energy to finish each job. The battery indicator lets you check the battery stats before starting on your project and ensures you to charge the battery on time. The impact wrench is controlled by a directional switch which automatically engages the trigger lock in central position. Once direction is chosen the trigger control can manage a variable speed up to 2700 rpm.Another great feature of the cordless impact wrench is the PowerProgram button, which allows selection of the 2 fastening torque modes: Full Power / Half Power & a reverse mode with special auto break mode.The fastening torque selection mode allows more control of the power of the tool as 2 modes can be selected before using the impact wrench.The reverse selection mode is available with 2 preset modes:Mode 1 - full reverse 620 Nm nut busting torque for a wide range of applications,Mode 2 - auto break. When the trigger is pushed, the tool will start hammering in reverse, as soon as the bolt breaks loose and there is no resistance, the tool will immediately stop reverse motion.The 1/2 impact wrench is equipped with a powerful built-in LED work light which illuminates the workspace without need for an additional light source.Tool has a cooling air outlet and is equipped with a battery protection circuit: designed to protect the battery from damage due to over-discharge, high temperature or over-current.What’s in the box?1xImpact wrench IWC12N061x4.0Ah Li-ion Battery BWC12N061xCharger1xHeavy-duty storage case1xUser manualTechnical specifications:
Ii-ion impact driver with brushless motor / cordless impact tool / professional brushless impact wrench / Li-Ion impact wrench / heavy-duty cordless impact wrenchThis heavy-duty impact wrench from Fluxon has many special features and is a great find for professionals and semi pro’s with frequent projects as its size and torque are useful for a wide range of jobs. Ideal for automotive Engineering and industrial projects.The efficient brushless motor ensures a high lifetime and also allows precise stepless speed control through the trigger of the impact wrench.Powered by a two 20V, 4.0Ah capacity Li-Ion battery which provides lots of energy available to finish each job. The battery indicator lets you check the battery stats before starting on your project and ensures you to charge the battery on time. The impact wrench is controlled by a directional switch which automatically engages the trigger lock in central position. Once direction is chosen the trigger control can manage a variable speed up to 2400 rpm.Another great feature of the cordless impact wrench is the PowerProgram button, which allows selection of the 3 fastening torque settings: Full Power / Half Power / Wrench Tight, and a reverse mode with special auto break mode. It makes quite a versatile tool, good for a wide variety of fastening and mechanical jobs.The fastening torque selection mode allows more control of the power of the tool as 3 modes can be selected before using the impact wrench.The reverse selection mode is available with 2 preset modes:Mode 1 - full reverse 1080 Nm nut busting torque.Mode 2 - auto break. When the trigger is pushed, the tools will start hammering in reverse, as soon as the bolt breaks loose and there is no resistance, the tool will immediately stop reverse motion.The 1/2 impact wrench is equipped with a powerful built-in LED work light which illuminates the workspace without need for an additional light source.Tool has a cooling air outlet and is equipped with a battery protection circuit: designed to protect the battery from damage due to over-discharge, high temperature or over-current.
What’s in the box?
Technical specifications:
Ii-ion impact driver with brushless motor / cordless impact tool / professional brushless impact wrench / Li-Ion impact wrench / heavy-duty cordless impact wrenchThis heavy-duty industrial impact wrench from Fluxon has many special features and is a great find for professionals. Ideal for all general and heavy duty repairs and maintenance applications, automotive engineering and industrial projects.The efficient brushless motor ensures a high lifetime and also allows precise stepless speed control through the trigger of the impact wrench.Powered by a two 20V, 4.0Ah capacity Li-Ion battery which provides lots of energy to finish each job. The battery indicator lets you check the battery stats before starting on your project and ensures you to charge the battery on time. The impact wrench is controlled by a directional switch which automatically engages the trigger lock in central position. Once direction is chosen the trigger control can manage a variable speed up to 1800 rpm.Another great feature of the cordless impact wrench is the PowerProgram button, which allows selection of the 3 fastening torque settings: Full Power / Half Power / Wrench Tight, and a reverse mode with special auto break mode. It makes quite a versatile tool, good for a wide variety of fastening and mechanical jobs.The fastening torque selection mode allows more control of the power of the tool as 3 modes can be selected before using the impact wrench.The reverse selection mode is available with 2 preset modes:Mode 1 - full reverse 1700 Nm nut busting torque.Mode 2 - auto break. When the trigger is pushed, the tools will start hammering in reverse, as soon as the bolt breaks loose and there is no resistance, the tool will immediately stop reverse motion.The 1/2 impact wrench is equipped with a powerful built-in LED work light which illuminates the workspace without need for an additional light source.Tool has a cooling air outlet and is equipped with a battery protection circuit: designed to protect the battery from damage due to over-discharge, high temperature or over-current.What’s in the box?
jacking beam / hydraulic pit jack / hydropneumatic jack pit shortThis 15 ton single cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.Falco Heavy duty pit jack has the following features:built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.The smart design of the single cylinder jack provides maximum lift and maximum capability:The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.The hydraulic cylinder can be positioned from left to right inside the frame to assure optimal lifting position.The pit jack moves on four wheels which can be mounted with separate adapter plates, the rollers on the adapter plate’s have roller bearings to ensure easy movement the length of the pit.Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.! Please note, the air hydraulic pit jack is supplied without adapter plates!These can be selected according to the pit profile and dimensions.
jacking beam / hydraulic pit jack / hydropneumatic jack pit long cylinderThis 20 ton double cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.Falco Heavy duty pit jack has the following features:built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.The smart design of the double cylinder pit jack provides maximum lift and maximum capability:The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.2 individually controlled rams offer safe and balanced lifting.Transversely sliding rams.Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.! Please note, the air hydraulic pit jack is supplied without adapter plates!These can be selected according to the pit profile and dimensions.
jacking beam / hydraulic pit jack / hydropneumatic jack pit shortThis short plate with conical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have conical rail type.Check the adapter plate selection sheet for more information.! Set adapter plates contain 2pcs.Technical specification:
jacking beam / hydraulic pit jack / hydropneumatic jack pit shortThis short plate with cylindrical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have straight rail profile.Check the adapter plate selection sheet for more information.! Set adapter plates contain 2pcs.Technical specification:
jacking beam / hydraulic pit jack / hydropneumatic jack pit shortThis long plate with cylindrical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have straight rail profile.Check the adapter plate selection sheet for more information.! Set adapter plates contain 2pcs.Technical specification:
jacking beam / hydraulic pit jack / hydropneumatic jack pit shortThis long plate with conical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have conical rail type.Check the adapter plate selection sheet for more information.! Set adapter plates contain 2pcs.Technical specification:
log splitter / wood splitter with gasoline engine
This gasoline engine powered log splitter from Woodcraft does not need an external power supply network and can therefore be used anywhere.With a pressing force of 22 tons and a large splitting blade, you can easily split logs up to 60 cm long.The splitter is very mobile and equipped with 2 sturdy support legs for extra stability, which make folding the splitter up and down a lot easier, and also ensures stability during splitting.Thanks to the foldable catch bracket, the split wood does not immediately fall to the ground. This also ensures that it is possible to split large diameter logs.The hydraulic cylinder is mounted on a dowel pin that allows the cylinder to slide during splitting, reducing the pressure on the cylinder rod. This makes it less sensitive to wear and leaks.Because the wood splitter is positioned vertically, it does not require much effort to slide large logs under it.This product complies with the new Nen standard 609-1/2017.! Please note that this log splitter is for vertical use only!Technical specifications:
splitter / wood press / logs / gasoline splitter / splitter horizontal / log splitter / splitterThis gasoline engine powered log splitter from Woodcraft does not need an external power supply network and can therefore be used anywhere.With a pressing force of 22 tons and a large 43 cm long splitting blade, you can easily split logs up to 50 cm long.The splitter is very mobile and, thanks to the nose wheel, easy to move and adjust in height. Thanks to the foldable collection flap, the split wood is collected instead of scattered on the ground.The hydraulic cylinder is mounted on a dowel pin that allows the cylinder to slide during splitting, reducing the pressure on the cylinder rod. This makes it less sensitive to wear and leaks. This product complies with the new Nen standard 609-1/2017.Please note that this log splitter is for horizontal use only!Technical specifications:
splitter / wood press/ log splitter / electric splitter / horizontal splitter / wood splitter electricThis wood splitter from Woodcraft has an electro-hydraulic drive, making it an economical way to split wood without using fuel.With a pressing force of 22 tons and a large 43 cm long splitting blade, you can easily split logs up to 50 cm long.The splitter is very mobile and, thanks to the nose wheel, easy to move and adjust in height. Thanks to the foldable collection flap, the split wood is collected instead of scattered on the ground.The hydraulic cylinder is mounted on a central mounting shaft that allows the cylinder to move during splitting, reducing the pressure on the cylinder rod. This makes it less sensitive to wear and leaks. This product complies with the latest directives 2016/42/EG & Nen standard 609-1/2017.Please note that this log splitter is for horizontal use only!Technical specifications:
lift transporters / furniture movers / hand-operated trolley This Mammuth hand trolley set is extremely suitable for moving and installing heavy furniture and equipment.Hand-operated trolley equipped winch handle geared mechanism.Four swivel castors with roller bearings with non marking poly wheels suitable for carpet floors.The transporters are easy to operate separately from each other. The objects to be moved are secured with the supplied ratchet straps (or cargo lashings) and can be easily and safely handled by two people.Set includes two transport units with built-in securing straps.Technical specifications:
tool trolley / mobile workbenchThis tool trolley from TOOLBOX4YOU consists of 2 fully extendable drawers with ball bearing guides and 2 doors.The doors can be centrally locked thanks to the cylinder lock including 2 keys.The countertop is made of moisture resistant plywood 25mm. The tool trolley moves due to 2 all-rubber fixed wheels, and 2 swivel wheels with brakes.The mobile workbench equipped with a sturdy handle gives you more control while moving.The shelf inside the cabinet can be set at different heights.Technical specifications:
hand lamp / dimmable hand lamp / rechargeable dimmable led lampThis Fluxon work lamp LED is a professional working light that provides a lot of light (700 lumens) thanks to the COB LED. The Light intensity is fully adjustable thanks to the stepless dimmer. Burning time is 2 to 16 hours, depending on the set brightness. The work lamp is equipped with a separately switched top lamp, making inspections in small places easily accessible.With its magnetic base you can position the lamp 360 degrees, it can also be hung with a 180 degree foldable hanging hook that will let you use this working light hands-free in any situation. The Fluxon work lamp is equipped with a battery indicator and a Li-ion 3.7V 2600mAh rechargeable battery, including USB charging cable.Technical specifications:
rotary on/off knob grounding magnet / ground clamp magneticEasy operation with rotary on/off knob, Soldatech magnetic ground clamp can be turned on and off.The welding process is accelerated by the ability to quickly place the ground clamp and can be used on both flat and round workpieces.Tighten the ground clamp in a clean place with a quick turn and start welding.
