Ii-ion impact driver with brushless motor / cordless impact tool /brushless impact wrench / Li-Ion impact wrench / short shaft cordless impact wrench
This Fluxon cordless impact wrench model has many special features and is a great find for professionals who need a small and powerful machine. This tool is distinguished by autonomy and light weight, ergonomic handle, and thanks to the short shaft it can be used in tight places where high torque is required.
The efficient brushless motor ensures a high lifetime and also allows precise stepless speed control through the trigger of the impact wrench.
Powered by a 20V, 4.0Ah capacity Li-Ion battery which provides lots of energy to finish each job. The battery indicator lets you check the battery stats before starting on your project and ensures you to charge the battery on time. 
The impact wrench is controlled by a directional switch which automatically engages the trigger lock in central position. Once direction is chosen the trigger control can manage a variable speed up to 2700 rpm.
Another great feature of the cordless impact wrench is the PowerProgram button, which allows selection of the 2 fastening torque modes: Full Power / Half Power & a reverse mode with special auto break mode.
The fastening torque selection mode allows more control of the power of the tool as 2 modes can be selected before using the impact wrench.
The reverse selection mode is available with 2 preset modes:
Mode 1 - full reverse 620 Nm nut busting torque for a wide range of applications,
Mode 2 - auto break. When the trigger is pushed, the tool will start hammering in reverse, as soon as the bolt breaks loose and there is no resistance, the tool will immediately stop reverse motion.
The 1/2 impact wrench is equipped with a powerful built-in LED work light which illuminates the workspace without need for an additional light source.
Tool has a cooling air outlet and is equipped with a battery protection circuit: designed to protect the battery from damage due to over-discharge, high temperature or over-current.
What’s in the box?
1xImpact wrench IWC12N06
1x4.0Ah Li-ion Battery BWC12N06
1xCharger
1xHeavy-duty storage case
1xUser manual
Technical specifications:

• Voltage 20V
• Square drive 1/2" with hog ring
• No load speed RPM 2300 / 2700 rpm
• Impact IPM 3100 / 3600 IPM
• Nut busting torque 620 Nm
• Max. fastening torque 290 / 450 Nm
• Shaft length 130 mm
• Height incl. battery 250 mm
• Battery 20V, 4.0Ah
• Battery type lithium-ion
• Weight with battery 1.75kg
• Weight without battery 1.1kg
• Capacity bolt size M8-M16 

Ii-ion impact driver with brushless motor / cordless impact tool / professional brushless impact wrench / Li-Ion impact wrench / heavy-duty cordless impact wrench
This heavy-duty impact wrench from Fluxon has many special features and is a great find for professionals and semi pro’s with frequent projects as its size and torque are useful for a wide range of jobs. Ideal for automotive Engineering and industrial projects.
The efficient brushless motor ensures a high lifetime and also allows precise stepless speed control through the trigger of the impact wrench.
Powered by a two 20V, 4.0Ah capacity Li-Ion battery which provides lots of energy available to finish each job. The battery indicator lets you check the battery stats before starting on your project and ensures you to charge the battery on time. 
The impact wrench is controlled by a directional switch which automatically engages the trigger lock in central position. Once direction is chosen the trigger control can manage a variable speed up to 2400 rpm.
Another great feature of the cordless impact wrench is the PowerProgram button, which allows selection of the 3 fastening torque settings: Full Power / Half Power / Wrench Tight, and a reverse mode with special auto break mode. It makes quite a versatile tool, good for a wide variety of fastening and mechanical jobs.
The fastening torque selection mode allows more control of the power of the tool as 3 modes can be selected before using the impact wrench.
The reverse selection mode is available with 2 preset modes:
Mode 1 - full reverse 1080 Nm nut busting torque.
Mode 2 - auto break. When the trigger is pushed, the tools will start hammering in reverse, as soon as the bolt breaks loose and there is no resistance, the tool will immediately stop reverse motion.
The 1/2 impact wrench is equipped with a powerful built-in LED work light which illuminates the workspace without need for an additional light source.
Tool has a cooling air outlet and is equipped with a battery protection circuit: designed to protect the battery from damage due to over-discharge, high temperature or over-current.

What’s in the box?

• 1xImpact wrench IWC12N10
• 2x4.0Ah Li-ion Battery BWC1234
• 1xCharger
• 1xHeavy-duty storage case
• 1xUser manual

Technical specifications:

• Voltage 20V
• Square drive 1/2" with hog ring
• No load speed RPM 1500 / 1900 / 2400
• Impact IPM 1500 / 1900/ 2200
• Nut busting torque 1080 Nm
• Max. fastening torque 300 / 500 / 860 Nm
• Shaft length 170 mm 
• Height incl. battery 280 mm
• Battery 20V, 4.0Ah
• Battery type lithium-ion
• Weight with battery 2.55kg
• Weight without battery 1.9kg
• Capacity bolt size M10 - M24

Ii-ion impact driver with brushless motor / cordless impact tool / professional brushless impact wrench / Li-Ion impact wrench / heavy-duty cordless impact wrench
This heavy-duty industrial impact wrench from Fluxon has many special features and is a great find for professionals. Ideal for all general and heavy duty repairs and maintenance applications, automotive engineering and industrial projects.
The efficient brushless motor ensures a high lifetime and also allows precise stepless speed control through the trigger of the impact wrench.
Powered by a two 20V, 4.0Ah capacity Li-Ion battery which provides lots of energy to finish each job. The battery indicator lets you check the battery stats before starting on your project and ensures you to charge the battery on time. 
The impact wrench is controlled by a directional switch which automatically engages the trigger lock in central position. Once direction is chosen the trigger control can manage a variable speed up to 1800 rpm.
Another great feature of the cordless impact wrench is the PowerProgram button, which allows selection of the 3 fastening torque settings: Full Power / Half Power / Wrench Tight, and a reverse mode with special auto break mode. It makes quite a versatile tool, good for a wide variety of fastening and mechanical jobs.
The fastening torque selection mode allows more control of the power of the tool as 3 modes can be selected before using the impact wrench.
The reverse selection mode is available with 2 preset modes:
Mode 1 - full reverse 1700 Nm nut busting torque.
Mode 2 - auto break. When the trigger is pushed, the tools will start hammering in reverse, as soon as the bolt breaks loose and there is no resistance, the tool will immediately stop reverse motion.
The 1/2 impact wrench is equipped with a powerful built-in LED work light which illuminates the workspace without need for an additional light source.
Tool has a cooling air outlet and is equipped with a battery protection circuit: designed to protect the battery from damage due to over-discharge, high temperature or over-current.

What’s in the box?

• 1xImpact wrench IWC12N17
• 2x4.0Ah Li-ion Battery BWC1234
• 1xCharger
• 1xHeavy-duty storage case
• 1xUser manual.

Technical specifications:

• Voltage 20V
• Square drive 1/2" with hog ring
• No load speed RPM 900 / 1200 / 1800
• Impact IPM 1800 / 2000/ 2200
• Nut busting torque 1700 Nm
• Max. fastening torque 750 / 900 / 1200 Nm
• Shaft length 230 mm
• Height incl. battery 280 mm
• Battery 20V, 4.0Ah
• Battery type lithium-ion
• Weight with battery 3.47kg
• Weight without battery 2.8kg
• Capacity bolt size M16 - M30

Ii-ion impact driver with brushless motor / cordless impact tool / professional brushless impact wrench / Li-Ion impact wrench / heavy-duty cordless impact wrench
This heavy-duty industrial impact wrench from Fluxon has many special features and is a great find for professionals. Ideal for all general and heavy duty repairs and maintenance applications, automotive engineering and industrial projects.
The efficient brushless motor ensures a high lifetime and also allows precise stepless speed control through the trigger of the impact wrench.
Powered by a two 20V, 4.0Ah capacity Li-Ion battery which provides lots of energy to finish each job. The battery indicator lets you check the battery stats before starting on your project and ensures you to charge the battery on time. 
The impact wrench is controlled by a directional switch which automatically engages the trigger lock in central position. Once direction is chosen the trigger control can manage a variable speed up to 1800 rpm.
Another great feature of the cordless impact wrench is the PowerProgram button, which allows selection of the 3 fastening torque settings: Full Power / Half Power / Wrench Tight, and a reverse mode with special auto break mode. It makes quite a versatile tool, good for a wide variety of fastening and mechanical jobs.
The fastening torque selection mode allows more control of the power of the tool as 3 modes can be selected before using the impact wrench.
The reverse selection mode is available with 2 preset modes:
Mode 1 - full reverse 1700 Nm nut busting torque.
Mode 2 - auto break. When the trigger is pushed, the tools will start hammering in reverse, as soon as the bolt breaks loose and there is no resistance, the tool will immediately stop reverse motion.
The 1/2 impact wrench is equipped with a powerful built-in LED work light which illuminates the workspace without need for an additional light source.
Tool has a cooling air outlet and is equipped with a battery protection circuit: designed to protect the battery from damage due to over-discharge, high temperature or over-current.

What’s in the box?

• 1xImpact wrench IWC34N17
• 2x4.0Ah Li-ion Battery BWC1234
• 1xCharger
• 1xHeavy-duty storage case
• 1xUser manual.

Technical specifications:

• Voltage 20V
• Square drive ¾’' with hog ring
• No load speed RPM 900 / 1200 / 1800
• Impact IPM 1800 / 2000/ 2200
• Nut busting torque 1700 Nm
• Max. fastening torque 750 / 900 / 1280 Nm
• Shaft length 230 mm
• Height incl. battery 280 mm
• Battery 20V, 4.0Ah
• Battery type lithium-ion
• Weight with battery 3.47kg
• Weight without battery 2.8kg
• Capacity bolt size M16 - M30

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This 15 ton single cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the single cylinder jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
The hydraulic cylinder can be positioned from left to right inside the frame to assure optimal lifting position.
The pit jack moves on four wheels which can be mounted with separate adapter plates, the rollers on the adapter plate’s have roller bearings to ensure easy movement the length of the pit.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

Technical specifications:

• Capacity 15 ton
• Working air pressure 7.5 - 12 Bar
• Stroke 200 mm
• Extension 100 mm
• Min. height 420 mm
• Max. height 620 mm
• Width from 600 to 880 mm
• Depth 665 mm
• Weight 255 kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit long cylinder
This 20 ton double cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the double cylinder pit jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
2 individually controlled rams offer safe and balanced lifting.
Transversely sliding rams.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

Technical specifications:

• Capacity 20 ton
• Working air pressure 7.5 t/m 12 Bar
• Stroke 420 mm
• Min. height 576 mm
• Max. height 996 mm
• Width from 1100 to 1400 mm
• Lifting points 200 to 1150 mm
  
• Depth 665 mm
• Weight 295 kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit long cylinder
This 20 ton double cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the double cylinder pit jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
2 individually controlled rams offer safe and balanced lifting.
Transversely sliding rams.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

Technical specifications:

• Capacity 20 ton
• Working air pressure 7.5 t/m 12 Bar
• Stroke 200 mm
• Min. height 356 mm
• Max. height 556 mm
• Width from 840 to 1140 mm
• Lifting points 200 to 890 mm
  
• Depth 665 mm
• Weight 265 kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This 15 ton single cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the single cylinder jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
The hydraulic cylinder can be positioned from left to right inside the frame to assure optimal lifting position.
The pit jack moves on four wheels which can be mounted with separate adapter plates, the rollers on the adapter plate’s have roller bearings to ensure easy movement the length of the pit.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

Technical specifications:

• Capacity 15 ton
• Working air pressure 7.5 - 12 Bar
• Stroke 800 mm
• Min. height 1020 mm
• Max. height 1820 mm
• Width from 1100 to 1400 mm
• Depth 665 mm
• Weight 280 kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This short plate with conical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have conical rail type.
Check the adapter plate selection sheet for more information.
! Set adapter plates contain 2pcs.
Technical specification:

• Type adapter: short plate
• Height: 263 mm
• Width: 520 mm
• Type rail: conical
• Wheel diameter: 80mm
• Wheel width: 45 mm
• Conical roller angle: 8.6°

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This short plate with cylindrical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have straight rail profile.
Check the adapter plate selection sheet for more information.
! Set adapter plates contain 2pcs.
Technical specification:

• Type adapter: short plate
• Plate height: 263 mm
• Plate width: 520 mm
• Type rail: cylindrical
• Wheel diameter: 80mm
• Wheel width: 45 mm

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This long plate with cylindrical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have straight rail profile.
Check the adapter plate selection sheet for more information.
! Set adapter plates contain 2pcs.
Technical specification:

• Type adapter: long plate
• Plate height: 338 mm
• Plate width: 520 mm
• Type rail: cylindrical
• Wheel diameter: 80mm
• Wheel width: 45 mm

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This long plate with conical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have conical rail type.
Check the adapter plate selection sheet for more information.
! Set adapter plates contain 2pcs.
Technical specification:

• Type adapter: long plate
• Height: 338 mm
• Width: 520 mm
• Type rail: conical
• Wheel diameter: 80 mm
• Wheel width: 45 mm
• Сonical roller angle: 8.6°

log splitter / wood splitter with gasoline engine

This gasoline engine powered log splitter from Woodcraft does not need an external power supply network and can therefore be used anywhere.
With a pressing force of 22 tons and a large splitting blade, you can easily split logs up to 60 cm long.
The splitter is very mobile and equipped with 2 sturdy support legs for extra stability, which make folding the splitter up and down a lot easier, and also ensures stability during splitting.
Thanks to the foldable catch bracket, the split wood does not immediately fall to the ground. This also ensures that it is possible to split large diameter logs.
The hydraulic cylinder is mounted on a dowel pin that allows the cylinder to slide during splitting, reducing the pressure on the cylinder rod. This makes it less sensitive to wear and leaks.
Because the wood splitter is positioned vertically, it does not require much effort to slide large logs under it.
This product complies with the new Nen standard 609-1/2017.
! Please note that this log splitter is for vertical use only!

Technical specifications:

• Pressure force 22 tons
• Cycle time 12.5s
• hydraulic oil capacity = 24.6L (not included!)
• max. diameter wood = 34.8 x 61cm
• max. pressure = 248 bar (3600psi)
• max. pump output = 11gpm / 41.5L/min
• wheel size = 16"
• motor type = YM168F19
• engine power = 6.5HP (196cc) / 3600rpm
• equipped with non-return valve
• splitting knife = 175mm hardened steel
• max. towing speed = 72km/h

splitter / wood press / logs / gasoline splitter / splitter horizontal / log splitter / splitter
This gasoline engine powered log splitter from Woodcraft does not need an external power supply network and can therefore be used anywhere.
With a pressing force of 22 tons and a large 43 cm long splitting blade, you can easily split logs up to 50 cm long.
The splitter is very mobile and, thanks to the nose wheel, easy to move and adjust in height. 
Thanks to the foldable collection flap, the split wood is collected instead of scattered on the ground.
The hydraulic cylinder is mounted on a dowel pin that allows the cylinder to slide during splitting, reducing the pressure on the cylinder rod. 
This makes it less sensitive to wear and leaks. This product complies with the new Nen standard 609-1/2017.
Please note that this log splitter is for horizontal use only!
Technical specifications:

• Pressure force 22 tons
• Cycle time 11s
• Hydraulic reservoir 14.5L
• Required oil 10L
• Max. wood length 55cm
• Splitting knife 43cm
• Hydraulic cylinder 10cm x 51cm
• Max. pressure 257bar
• Gear pump 53 L/min, 2-stage
• Max. traction speed 60km
• Wheel size 41cm 4.8x8

splitter / wood press/ log splitter / electric splitter / horizontal splitter / wood splitter electric
This wood splitter from Woodcraft has an electro-hydraulic drive, making it an economical way to split wood without using fuel.
With a pressing force of 22 tons and a large 43 cm long splitting blade, you can easily split logs up to 50 cm long.
The splitter is very mobile and, thanks to the nose wheel, easy to move and adjust in height. 
Thanks to the foldable collection flap, the split wood is collected instead of scattered on the ground.
The hydraulic cylinder is mounted on a central mounting shaft that allows the cylinder to move during splitting, reducing the pressure on the cylinder rod. 
This makes it less sensitive to wear and leaks. This product complies with the latest directives 2016/42/EG & Nen standard 609-1/2017.
Please note that this log splitter is for horizontal use only!
Technical specifications:

• Pressure force 22 tons
• Cycle time 11s
• Hydraulic reservoir 14.5L
• Required oil 10L
• Max. wood length 55cm
• Splitting knife 43cm
• Hydraulic cylinder 10cm x 51cm
• Max. pressure 25.7Mpa
• Gear pump 53 L/min, 2-stage
• Max. traction speed 60km
• Wheel size 41cm 4.8x8
• Electric motor 2.2kW, 400V, 2880RPM

lift transporters / furniture movers / hand-operated trolley 
This Mammuth hand trolley set is extremely suitable for moving and installing heavy furniture and equipment.
Hand-operated trolley equipped winch handle geared mechanism.
Four swivel castors with roller bearings with non marking poly wheels suitable for carpet floors.
The transporters are easy to operate separately from each other. The objects to be moved are secured with the supplied ratchet straps (or cargo lashings) and can be easily and safely handled by two people.
Set includes two transport units with built-in securing straps.
Technical specifications:

• Load capacity = 600kg
• Lifting height = 410mm
• Lifting plate size = 225x120mm
• Wheel polyurethane = 150mm
• Incl. set cargo lashing = 5m

tool trolley / mobile workbench
This tool trolley from TOOLBOX4YOU consists of 2 fully extendable drawers with ball bearing guides and 2 doors.
The doors can be centrally locked thanks to the cylinder lock including 2 keys.
The countertop is made of moisture resistant plywood 25mm. 
The tool trolley moves due to 2 all-rubber fixed wheels, and 2 swivel wheels with brakes.
The mobile workbench equipped with a sturdy handle gives you more control while moving.
The shelf inside the cabinet can be set at different heights.
Technical specifications:

• Countertop thickness: 25mm
• Drawers front panel: W 440mm x H 165mm (inside: L 480mm x W 410mm)
• Doors W 440mm x H 555mm (inside cabinet: L 510mm x W 465mm)

hand lamp / dimmable hand lamp / rechargeable dimmable led lamp
This Fluxon work lamp LED is a professional working light that provides a lot of light (700 lumens) thanks to the COB LED. The Light intensity is fully adjustable thanks to the stepless dimmer. Burning time is 2 to 16 hours, depending on the set brightness. The work lamp is equipped with a separately switched top lamp, making inspections in small places easily accessible.
With its magnetic base you can position the lamp 360 degrees, it can also be hung with a 180 degree foldable hanging hook that will let you use this working light hands-free in any situation. The Fluxon work lamp is equipped with a battery indicator and a Li-ion 3.7V 2600mAh rechargeable battery, including USB charging cable.

Technical specifications:

• Type of bulb: COB LED
• Light color: neutral white 6500K
• Output: 7W
• Brightness: 700 Lm
• USB connection: Micro usb
• Charger time: 4 hours
• Work time: 2 - 16 hours
• Battery: Li-ion 3.7V 2600mAh

rotary on/off knob grounding magnet / ground clamp magnetic
Easy operation with rotary on/off knob, Soldatech magnetic ground clamp can be turned on and off.
The welding process is accelerated by the ability to quickly place the ground clamp and can be used on both flat and round workpieces.
Tighten the ground clamp in a clean place with a quick turn and start welding.

rotary on/off knob grounding magnet / ground clamp magnetic
Easy operation with rotary on/off knob, Soldatech magnetic ground clamp can be turned on and off.
The welding process is accelerated by the ability to quickly place the ground clamp and can be used on both flat and round workpieces.
Tighten the ground clamp in a clean place with a quick turn and start welding.