Hammer drill Premium
Sds Max Premium hammer drills are made from high grade tool steel. The carbide cutting plate ensures you can drill holes very fast. Premium hammer drills are coming with high grade carbide for a longer service life. The straight flute ensures an easy dust removal. The 4-cutter ensures you can make precise round holes with less vibration. Suitable for hammer drilling in masonry and (reinforced) concrete.
Technical specifications:
diameter = 20mm
length = 320mm
work length = 200mm
carbide cutting head
main cutter and 2 side cutters
connection = SDS-max
length = 520mm
Hammer drill
SDS Plus hammer drills are made from high grade tool steel. The carbide cutting plate ensures you can drill holes very fast. The A-symmetric flute ensures an easy dust removal. Suitable for hammer drilling in masonry and (reinforced) concrete.
diameter = 14mm
length = 250mm
work length = 190mm
2-cutter
connection = SDS-plus
diameter = 18mm
Hand taps set
HSS fully ground hand taps are made from high speed steel. Full grinding during the production process results in a very sharp tap with high precision. In combination with cutting oil this will result in a very long tool life. Very suitable for tapping internal threads in unalloyed steels such as sheet steel, construction steel and cast iron.
size = M10
pitch = 1,50mm
length = 70mm
thread length = 24mm
DIN 352
material = HSS-G
intersection angle = flat
right hand
fully ground
3 pieces
size = M12
pitch = 1,75mm
length = 75mm
thread length = 29mm
size = M14
pitch = 2,00mm
length = 80mm
thread length = 30mm
size = M16
thread length = 32mm
size = M18
pitch = 2,50mm
length = 95mm
thread length = 40mm
size = M20
size = M22
length = 100mm
size = M24
pitch = 3,00mm
length = 110mm
thread length = 45mm
size = M3
pitch = 0,50mm
length = 40mm
thread length = 10mm
intersection angle = point
size = M4
pitch = 0,70mm
length = 45mm
thread length = 12mm
size = M5
pitch = 0,80mm
length = 50mm
thread length = 13mm
size = M6
pitch = 1,00mm
length = 56mm
thread length = 15mm
size = M8
pitch = 1,25mm
length = 63mm
thread length = 18mm
Machine tap
HSS Cobalt 5% machine taps for bottoming holes are made from alloyed high speed steel. With adding Cobalt the taps gets an extremely high hardness which enables them to cut in steel types which are difficult to cut. Full grinding during the production process results in a very sharp tap with high precision. In combination with cutting oil this will result in a very long tool life. Very suitable for tapping bottoming threads in alloyed steels and steels which are difficult to cut such as stainless steel (inox).
Technical specificaties:
DIN 371
connection = square
material = HSS - Co5%
M35 steel
size = M27
DIN 376