Lamellenschleifscheibe LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 125mm
- grain = K80
- bore = 22,23mm

Stabelelektroden Rutil

These INE rutile welding electrodes are suitable for unalloyed and low alloyed steel (mild steel). They are rutile cellulose welding electrodes in accordance with AWS E6013. INE welding electrodes of the type 6013 are suitable for universal use, all kinds of welding jobs and lighter construction duties.
The slag is easy to remove.
Furthermore, the welding electrodes are suitable for all welding positions.

- brand = INE
- thickness = 2,5mm
- length = 350mm
- suitable for = steel
- amount = 14pcs

Chemical analysis:
C 0.06
Si 0.40
Mn 0.60

Standards:
AWS A 5.1/ASME SFA 5.1: E6013
AWS A 5.1/ASME SFA 5.1: E4313
EN ISO 2560-A: E 42 0 RC 1 1

Certificates:
DB - TÜV

*Certificates are available on request

Handgewindebohrer Satz

HSS geschliffen Handgewindebohrer werden aus legiertem Schnellarbeitsstahl hergestellt. Vollschliff während des Produktionsprozesses führt zu einem sehr scharfen Gewindebohrer mit hoher Präzision. In Kombination mit Schneidöl führt dies zu einer sehr hohen Standzeit. Sehr gut geeignet zum Gewindebohren von Innengewinden in unlegierten Stählen wie Stahlblech, Baustahl und Gusseisen.

Technische Daten:

• Größe = M6

• Steigung = 1,00mm

• Länge = 56mm

• Drahtlänge = 15mm

• DIN 352

• Material = HSS - G

• Schnittwinkel = Punkt

• rechte Hand

• vollständig geschliffen

• 3 Stück

Body repair kit cylinder

- 1x 4 ton cylinder
- 1x 10 ton cylinder
- 1 x 2 ton mini cylinder
- 1 x 4 ton mini cylinder
- 1 x 10 ton mini cylinder
- 1 x 2 ton pull cylinder

Lamellenschleifscheibe LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 125mm
- grain = K40
- bore = 22,23mm

Hydraulischer Flanschspreizer

Dieser Universal Flanschspreizer ist standardmäßig mit einer C18S-Hydraulikkupplung ausgestattet. Damit eignet sich der Spreizer als Ersatz für die Ausbeulsets PHE04 und PHE10.

Dank seiner kompakten Größe kann der Streuer auf engstem Raum eingesetzt werden.

Technische Spezifikationen:

• Kapazität = 500kg

• Anschluss = 1/4'' NPT-Gewinde

Zylinder Druckverlust test Satz

This cylinder leak detection set is suitable for testing the engine for problems such as damaged valves, worn sealing rings and leaking head gaskets. The pressure gauge has a range of 0 - 7 bar (0 - 100psi). The leakage meter measures from 0 - 100% leakage in steps of 5%.
The set is suitable for any gasoline engine with spark plugs of 12mm and 14mm of almost all cars, motorcycles and trucks.

Content:

• pressure gauge

• leakage gauge

• 2x spark plug adapter

• hose

Ultraschallreiniger / Ultraschallgerät

Fluxon ultrasonic cleaners are extremely suitable for cleaning a variety of different materials.

By using ultrasonic vibrations, in combination with cleaning fluid, stuck dirt or production residues are easily removed.

Advantages:

• Very efficient

• Has a digital controller to guarantee a long service life with high precision

• Requires little cleanser

• Cleans very environmentally friendly

The ultrasonic cleaners are suitable for 3 different cleaning methods:

1. Normal cleaning: Only water is used for cleaning, temperatures < 50 degrees Celsius

2. Advanced cleaning: Add some cleaning drops, liquid soap or degreaser, but no acids!

3. Extensive cleaning: Removal of tarnish, carbon and rust from non-plated metals. Use specific cleansers suitable for ultrasonic cleaners.

Specifications:

• tank capacity = 10L

• ultrasonic power = 240W

• heating power = 300W

• cleaning frequency = 28kHz, 40kHz

• time control = 1 - 99min

• temperature control = 0 - 80 degrees Celsius

• tank dimensions = 300 x 240 x 150mm

Lamellenschleifscheibe LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 115mm
- grain = K60
- bore = 22,23mm

Getriebeheber

This jack is very suitable for (dis)assembling gearboxes. The hydraulic transmission jack is easy to operate with the foot pedal and easy to maneuver in any position using the 4 sturdy castor wheels.

• capacity = 500kg

• min. height = 1120mm

• max. height = 1940mm

• stroke = 820mm

Sandstrahlpistole fur grosse Sandstrahlkabines

Geeignet fur Type Strahlkabine SB42A, SB42AB, SB99A und SB120A.

Schweißschutzglas Satz

• 4x outside glass

• 1x inside glass

Suitable for the INE automatic welding helmet Smart

Selbstzentrierende 3-backen Drehfutter

The metal workpiece is clamped using this chuck. The chuck is self-centering, so the claws are tightened all three at the same time. It is important that the material has a round, triangular or hexagonal profile.

• diameter = 200mm

• cylindrical fitting edge

• comes with inside and outside set of claws

Diesel Wasserpumpe Elektrostart

waterpump:
- connection = 100mm / 4''
- cont. head = 31m
- self-priming time = 180s/4m
- max. suction head = 8m
- cont. capacity = 96m3/hr / 1600L/min
- dB (10m) = 90
- LWa = 118dB

engine:
- engine model = 186F
- engine speed = 3600rpm
- engine type = single-cylinder 4 stroke air cooled diesel engine
- displacement = 296cc
- bore stroke = 86 x 70mm
- electric start
- fuel tank capacity = 5,5L

* including hose connections

Zugzylinder hydraulisch

• capacity = 20 ton

• max. length = 980mm

• stroke = 200mm

• plunger diameter = 48mm

• outside diameter = 92mm

• working pressure = 750bar

Absorptionsgranulat

The Ecowave OCB30 Fibercan+ absorbent is used for removing especially oil and grease stains in the workshop or garage. After application to the stain, the absorbent almost immediately absorbs the oil (or other substance) and converts it into coarse grains.
In combination with the Ecowave absorb, it is easy to sweep up, filter and reuse the used absorbent. This makes the use of Fibercan + environmentally friendly, economical and efficient.

The product consists of a natural formula based on lignocellulose fibers, which immediately impact in the liquid. This gives the contaminated substance a coarser size and a different color. This structure makes it easy to separate the absorbent from the contaminated substances using the filter system of the Ecowave absorb, so that the absorbent can be reused.

Traditional absorbents are impractical, high in consumption and produce a lot of waste. With the use of the Ecowave absorb in combination with the Fibercan+ absorbent, all these negative properties are solved.

• content = 30L

• 100% natural

Unabhängige 4-backen Drehfutter

The metal workpiece is clamped using this chuck. The chuck is independent, so the claws can each be tightened separately and can also placed the other way around. This also allows material with a different shape to be clamped.

• diameter = 160mm

• cylindrical fitting edge

Elektrische Gewindeschneidmaschine / Gewindeschneidarm

Diese elektrische Cowley-Gewindeschneidmaschine wird für schnelles und genaues Gewindeschneiden von verschiedenen Materialien verwendet. Die Maschine kann sowohl horizontal als auch vertikal eingesetzt werden. Die Geschwindigkeit ist variabel und einstellbar, die Kühlung ist gut in das Gehäuse integriert und die Maschine hat einen internen Speicher zum Speichern mehrerer Programme.

Die Gewindeschneidmaschine verfügt über die folgenden Funktionen:

• HD-Touchscreen für einfache Steuerung in Niederländisch, Englisch und Französisch

• SPS-Steuerung

• Selbstschmierende Bronzebuchsen für optimale Flexibilität

• Großer Gewindeschneidbereich von M6 bis M24

• Dynamisch einstellbare Gewindeschneidetiefen

• Integrierte Ein/Aus-Taste

• Schwereloser Betrieb dank Gasfedern

• Leistungsstarker Servomotor

• Elektrisch einstellbares Drehmoment

• Einstellbare Eingangs- und Ausgangsgeschwindigkeit

• Touchscreen mit Schutzabdeckung

• Auswechselbare Gewindeschneidköpfe mit Schnellwechselsystem

Technische Spezifikationen:

• Leistung = 1,2kW

• Spannung = 230V

• Einschaltdauer = 100%

• Gewindeschneidbereich = M6 bis M24

• max. Drehzahl = 200rpm

• max. Arbeitsradius = 1200mm

Die Maschine ist standardmäßig ausgestattet mit:

9x GT24 DIN-Gewindebohrerhalter mit Rutschkupplung (einstellbares Drehmoment):

• M5-6 (ø6.0mm / Schaft = 4.9mm)

• M8 (ø8.0mm / Schaft  = 6.2mm)

• M10 (ø10.0mm / Schaft = 8.0mm)

• M12 (ø9.0mm / Schaft = 7.0mm)

• M14 (ø11.0mm / Schaft = 9.0mm)

• M16 (ø12.0mm / Schaft = 9.0mm)

• M18 (ø14.0mm / Schaft = 11.0mm)

• M20 (ø16.0mm / Schaft = 12.0mm)

• M22-24 (ø18.0mm / Schaft = 14.5mm)

BITTE BEACHTEN SIE; Der Gewindeschneidmachine wird ohne mobilen Unterschrank mit Gusplatte geliefert. Dieser ist optional erhaltlich, siehe verwante Prdukten.

Schweißerjacke

Suede leather welding jacket with a number of useful features:

- double closure with velcro and buttons for maximum protection
- protection against sparks
- raised collar
- underarm holes for greater breathability
- contains a inside pocket
- elastic cuffs

- size = XL

Folie satz

- dimensions = 550 x 250mm
- suitable for SB11A sand blast cabinet
- 5 pieces