Hand taps set

HSS fully ground hand taps are made from high speed steel. Full grinding during the production process results in a very sharp tap with high precision. In combination with cutting oil this will result in a very long tool life. Very suitable for tapping internal threads in unalloyed steels such as sheet steel, construction steel and cast iron.

Technical specifications:

• size = M6

• pitch = 1,00mm

• length = 56mm

• thread length = 15mm

• DIN 352

• material = HSS-G

• intersection angle = point

• right hand

• fully ground

• 3 pieces

Flap disc LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 125mm
- grain = K80
- bore = 22,23mm

Welding electrodes rutile

These INE rutile welding electrodes are suitable for unalloyed and low alloyed steel (mild steel). They are rutile cellulose welding electrodes in accordance with AWS E6013. INE welding electrodes of the type 6013 are suitable for universal use, all kinds of welding jobs and lighter construction duties.
The slag is easy to remove.
Furthermore, the welding electrodes are suitable for all welding positions.

- brand = INE
- thickness = 2,5mm
- length = 350mm
- suitable for = steel
- amount = 14pcs

Chemical analysis:
C 0.06
Si 0.40
Mn 0.60

Standards:
AWS A 5.1/ASME SFA 5.1: E6013
AWS A 5.1/ASME SFA 5.1: E4313
EN ISO 2560-A: E 42 0 RC 1 1

Certificates:
DB - TÜV

*Certificates are available on request

Body repair kit cylinder

- 1x 4 ton cylinder
- 1x 10 ton cylinder
- 1 x 2 ton mini cylinder
- 1 x 4 ton mini cylinder
- 1 x 10 ton mini cylinder
- 1 x 2 ton pull cylinder

Hydraulic flange spreader

This universal flange spreader is standard equipped with a C18S hydraulic coupling. This makes the spreader suitable as a replacement for the body repair sets PHE04 and PHE10.

Thanks to its compact size, the spreader can be used in tight spaces.

Technical specifications:

• capacity = 500kg

• connection = 1/4'' NPT thread

Flap disc LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 125mm
- grain = K40
- bore = 22,23mm

Cylinder leak detection kit

This cylinder leak detection set is suitable for testing the engine for problems such as damaged valves, worn sealing rings and leaking head gaskets. The pressure gauge has a range of 0 - 7 bar (0 - 100psi). The leakage meter measures from 0 - 100% leakage in steps of 5%.
The set is suitable for any gasoline engine with spark plugs of 12mm and 14mm of almost all cars, motorcycles and trucks.

Content:

• pressure gauge

• leakage gauge

• 2x spark plug adapter

• hose

Ultrasonic cleaner / ultrasonic device

Fluxon ultrasonic cleaners are extremely suitable for cleaning a variety of different materials.

By using ultrasonic vibrations, in combination with cleaning fluid, stuck dirt or production residues are easily removed.

Advantages:

• Very efficient

• Has a digital controller to guarantee a long service life with high precision

• Requires little cleanser

• Cleans very environmentally friendly

The ultrasonic cleaners are suitable for 3 different cleaning methods:

1. Normal cleaning: Only water is used for cleaning, temperatures < 50 degrees Celsius

2. Advanced cleaning: Add some cleaning drops, liquid soap or degreaser, but no acids!

3. Extensive cleaning: Removal of tarnish, carbon and rust from non-plated metals. Use specific cleansers suitable for ultrasonic cleaners.

Specifications:

• tank capacity = 10L

• ultrasonic power = 240W

• heating power = 300W

• cleaning frequency = 28kHz, 40kHz

• time control = 1 - 99min

• temperature control = 0 - 80 degrees Celsius

• tank dimensions = 300 x 240 x 150mm

Flap disc LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 115mm
- grain = K60
- bore = 22,23mm

Transmission jack / gearbox jack

This jack is very suitable for (dis)assembling gearboxes. The hydraulic transmission jack is easy to operate with the foot pedal and easy to maneuver in any position using the 4 sturdy castor wheels.

• capacity = 500kg

• min. height = 1120mm

• max. height = 1940mm

• stroke = 820mm

Diesel waterpump electric start

waterpump:
- connection = 100mm / 4''
- cont. head = 31m
- self-priming time = 180s/4m
- max. suction head = 8m
- cont. capacity = 96m3/hr / 1600L/min
- dB (10m) = 90
- LWa = 118dB

engine:
- engine model = 186F
- engine speed = 3600rpm
- engine type = single-cylinder 4 stroke air cooled diesel engine
- displacement = 296cc
- bore stroke = 86 x 70mm
- electric start
- fuel tank capacity = 5,5L

* including hose connections

Sandblasting gun for big sandblasters

Suitable for sand blaster type SB42A, SB42AB, SB99A and SB120A.

Welding glass set

• 4x outside glass    

• 1x inside glass

Suitable for the INE automatic welding helmet Smart

Self-centering three-jaw chuck

The metal workpiece is clamped using this chuck. The chuck is self-centering, so the claws are tightened all three at the same time. It is important that the material has a round, triangular or hexagonal profile.

• diameter = 200mm

• cylindrical fitting edge

• comes with inside and outside set of claws

Absorption granules

The Ecowave OCB30 Fibercan+ absorbent is used for removing especially oil and grease stains in the workshop or garage. After application to the stain, the absorbent almost immediately absorbs the oil (or other substance) and converts it into coarse grains.
In combination with the Ecowave absorb, it is easy to sweep up, filter and reuse the used absorbent. This makes the use of Fibercan + environmentally friendly, economical and efficient.

The product consists of a natural formula based on lignocellulose fibers, which immediately impact in the liquid. This gives the contaminated substance a coarser size and a different color. This structure makes it easy to separate the absorbent from the contaminated substances using the filter system of the Ecowave absorb, so that the absorbent can be reused.

Traditional absorbents are impractical, high in consumption and produce a lot of waste. With the use of the Ecowave absorb in combination with the Fibercan+ absorbent, all these negative properties are solved.

• content = 30L

• 100% natural

Hydraulic pull back cylinder

• capacity = 20 ton

• max. length = 980mm

• stroke = 200mm

• plunger diameter = 48mm

• outside diameter = 92mm

• working pressure = 750bar

Independent four-jaw chuck

The metal workpiece is clamped using this chuck. The chuck is independent, so the claws can each be tightened separately and can also placed the other way around. This also allows material with a different shape to be clamped.

• diameter = 160mm

• cylindrical fitting edge

Welding jacket

Suede leather welding jacket with a number of useful features:

- double closure with velcro and buttons for maximum protection
- protection against sparks
- raised collar
- underarm holes for greater breathability
- contains a inside pocket
- elastic cuffs

- size = XL

Foil set

- dimensions = 550 x 250mm
- suitable for SB11A sand blasting cabinet
- 5 pieces

Electric tapping machine / tapping arm

This Cowley electric tapping machine is used for fast and accurate tapping of different types of materials. The machine can be used both horizontally and vertically. The speed is variable and adjustable, the cooling is nicely integrated in the housing and the machine has an internal memory for storing multiple programs.

The tapping machine also has the following features:

• HD Touchscreen for easy control in Dutch, English and French

• PLC control

• Self-lubricating bronze bushings for optimum flexibility

• Wide tap range from M6 to M24

• Dynamically adjustable tap depths

• Integrated on/off button

• Weightless operation thanks to gas springs

• Powerful servo motor

• Electrically adjustable torque

• Adjustable input and output speed

• Touchscreen with protective cover

• Interchangeable tap heads with quick-release system

Technical specifications:

• power = 1,2kW

• voltage = 230V

• duty cycle = 100%

• tap range = M6 to M24

• max. speed = 200rpm

• max. working radius = 1200mm

The machine comes standard with:

9x GT24 DIN tap holder with slip coupling (adjustable torque):

• M5-6 (ø6.0mm / shank = 4.9mm)

• M8 (ø8.0mm / shank  = 6.2mm)

• M10 (ø10.0mm / shank = 8.0mm)

• M12 (ø9.0mm / shank = 7.0mm)

• M14 (ø11.0mm / shank = 9.0mm)

• M16 (ø12.0mm / shank = 9.0mm)

• M18 (ø14.0mm / shank = 11.0mm)

• M20 (ø16.0mm / shank = 12.0mm)

• M22-24 (ø18.0mm / shank = 14.5mm)

PLEASE NOTE: The tap arm is supplied without a mobile base cabinet with a cast iron top. This is optionally available, see related products.