Splitter
2 pole from 1 to 2 plugs. Suitable for the LED lamps LB55V12 and LB12VE.
Wiring harness
Suitable for connecting 2 LED lamps with 1 wiring harness, such as the LB55V12 and the LB12VE.
Including:
built-in switch
cable eyes M6 plus and minus
connector for connecting the lamps
relay
This charger is suitable for the work light LB30BAT.
20V
1,4A
This charger is suitable for the work light LB10LIS.
12V
1A
This charger + USB cable is suitable for the work lights WL04CM and WL04UV.
5V
1,2A
This charger + USB cable is suitable for the work lights WL04WB and LB05BAL.
Mounting rubber
- angled
- suitable for LB15RL
- round
- flat
Wire harness Suitable for the LB180VB18 LED offroad light.
Wire harness Suitable for the LB120VB12 LED offroad light.
Remote control
Suitable for both LED offroad bars: LB120VB12 and LB180VB18.
Loose connection cable Suitabel for the following LED lights: LB12VB, LB12VS, LB60V6 and LB80VR.
Mounting clamp offroad lights Suitable for the following models offroad lights: LB12VB, LB12VS, LB60V6, LB120VB12 and LB180VB18.
Fuse holder waterproof - incl. fuse Suitable for the following LED lights: LB12VB, LB12VS, LB60V6 and LB80VR.
Universal power adapter
This universal AC/DC adapter is ideal for connecting various devices to the mains supply to power or charge them. The adapter comes with 6 interchangeable plugs and is easy to set to 7 different voltages.
Technical specifications:
voltage in = 100~240V / 50-60Hz
voltage off =
- 3.0V DC @ 1A, 3W
- 4.5V DC @ 1A, 4.5W
- 5.0V DC @ 1A, 5W
- 6.0V DC @ 1A, 6W
- 7.5V DC @ 1A, 7.5W
- 9.0V DC @ 1A, 9W
- 12.0V DC @ 1A, 12W
current = 250mA
max efficiency = 72.5%
cable length = 1,8m
Suitable for the lamps LB10LIS, LB10BAS, WL04CM, WL04UV and ML50LED. Also suitable for the LED lighting 8W for workshop modules GC8WLED, it is possible to connect 3 of these LED bars to 1 adapter.
Note: The polarity is reversible, make sure it is set correctly.
Dimensions of interchangeable plugs:
2.5mm
3.5mm
DC 3.5 x 1.35mm
DC 5.0 x 2.1mm
DC 5.5 x 1.5mm
DC 5.5 x 2.5mm
