Wheel bearing set universal

This set is suitable for mounting bearings and sealing rings. Especially useful when used with a hydraulic press.
The set comes with a metal handle for use with a hammer and a length of 273mm and 17 mounting pads with a diameter of 70 tot 150mm.

Chain oil filter wrench / crescent chain wrench

Suitable for pipes with a diameter of 70 tot 120mm. The wrench has a length of 400mm and is easy to adjsut and click to 500 and 600mm.

Brake cylinder honing device

This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others.
Suited for cylinders with a diameter of 58 to 168mm.

Plastic locking nut assortment

Content:

- 30x nut clip for Mitsubishi

- 20x nut clip for Toyota

- 30x nut clip for Toyota and Nissan

- 40x nut clip for Mazda and Nissan

- 25x screw grommet for Mitsubishi

- 40x screw nut for Ford

- 30x nut clip for Toyota and Nissan

- 40x headlight nut for Volkswagen and GM

- 20x screw grommet for Toyota

- 25x connecting clip for Mercedes

- 25x screw clip for Renault

- 25x screw grommet for Fiat

Universal caliper wind back kit

This set is suitable for turning and pushing  back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.
Suitable for almost any car brand.

Content:

• 1 spindle right thread

• 1 spindle left thread

• 2 positioning plates

• 17 adapter plates

Inner bearing puller set / impact puller set

This bearing puller set is suitable for disassembling inner bearings. Even the most stuck bearings can be removed with the help of the slide hammer.

Content:

• 1x slide hammer of 940 grams and 380mm long

• 1x internal extractor 12 - 14mm

• 1x internal extractor 14 - 19mm

• 1x internal extractor 18 - 25mm

• 1x internal extractor 25 - 32mm

Exhaust pipe expander kit

This set is suitable for expanding or to re-round the exhaust pipe.

3 expanders:

• 28 to 44mm

• 38 to 63mm

• 54 to 88mm

Oil filter clamp / oil filter wrench / oil filter plier

Suitable for easy replacement of oil filters with a diameter of 63,5 to 98,5mm that are accessible from the front. The 3 arms clamp tightly around the oil filter

• drive = 3/8"

Assorted fir tree fixings

Contains all kinds of fir tree fixings for general applications and vehicles.
Suitable for a number of vehicles: Ford, GM, Mazda, Nissan, Toyota and VW.

Content:
- 30x radiator yoke, fender and bumper shield retainer
- 30x fender and bumper shield retainer
- 15x interior trim panel retainer
- 15x door trim panel retainer
- 50x door weather strip retainer
- 10x bumper fascia retainer
- 35x hood insulation retainer
- 30x fender and bumper shield retainer
- 50x cowl grille retainer
- 25x retainer for battery post cable shield, radiator side air baffle
- 20x retainers
- 30x trim panel retainer

Exhaust pipe compressor

Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.

Screw thread reparation set / oil drain repair kit

Ideal for repairing of severely damaged screw thread of carter plugs.

This set is suitable for the following car brands: Audi, BMW, Citroën, Mercedes-Benz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugoet, Porsche, Renault, Saab, Seat, Skoda, Toyota, Volvo and VW.

Content:

- 4x thread taps = M13 x 1,5 - M15 x 1,5 - M17 x 1,5 - M20 x 1,5

- 5x carter plug M13 x 1,5 10 sealing rings

- 5x carter plug M15 x 1,5 10 sealing rings

- 5x carter plug M17 x 1,5 10 sealing rings

- 5x carter plug M20 x 1,5 10 sealing rings

Motorcycle special socket

For assembling and disassembling of the full floating axle of a motorcycle.

Suitable for:

- 19mm = Honda

- 22mm = Kawasaki, BMW

- 24mm = Suzuki, Honda, BMW K1, K1000

Nut bolt and stud extractor set

This set is suitable for removing nuts, bolts and stuck studs.

Content:

• 5 bolt removers for left side thread = M3-M6, M6-M8, M8-M11, M11-M14 and M14-M18

• 4 stud sockets 1/2" drive = 6, 8, 10 and 12mm

• 9 spiral sockets for 6pt nuts 3/8" drive = 10, 11, 12, 13, 14, 15, 16, 17 and 19mm

• material = chrone molybdenum steel

Clutch aligning set

This universal centering set is suitable for very accurate and simple centering of the clutch plate on vehicles with top bearing.

Content:

• 1x centering mandrel with screw thread

• 8x adapter in sizes: 11 x 18mm, 12 x 18mm, 15 x 18mm, 17 x 18mm, 19 x 18mm, 20 x 18mm, 21 x 18mm, 25 x 18mm

• 1x conical adapter for larger sizes

Exhaust rubber hooks

This hook set is used for applying or removing exhaust rubbers.

- 1 curved hook
- 1 flat hook 90 degrees

Coil spring compressor set manual

This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.

• max. working range = 265mm

Interior clips assortment

This 192-piece assortment box contains interior clips for dashboard panels, door panels and coating of various vehicles such as Chrysler, Ford, GM, Honda, Renault, Toyota and Volkswagen.

Content:

• 30x ø hole = 6,3mm / ø head = 18mm / length = 2,4 - 13,7mm

• 20x ø hole = 6,3mm / ø head = 17,3mm / length = 14,3mm

• 15x ø hole = 7mm / ø head = 19mm / length = 3,2 - 28,5mm

• 20x ø hole = 8mm / ø head = 20mm / length = 11mm

• 20x ø hole = 8mm / ø head = 19mm / length = 2 - 12,5mm

• 12x ø hole = 8mm / ø head = 20mm / length = 20mm

• 20x ø hole = 9mm / ø head = 16mm / length = 1,5 - 13mm

• 10x ø hole = 9mm / ø head = 18mm / length = 28mm

• 10x ø hole = 9,5mm / ø head = 25mm / length = 3 - 14,5mm

• 15x ø hole = 10mm / ø head = 20mm / length = 13mm

• 10x ø hole = 10mm / ø head = 21mm / length = 1 - 20mm

• 10x ø hole = 10mm / ø head = 20mm / length = 18mm