Camshaft timing kit Opel-VauxhallThis set is suitable for setting the timing of many different Opel engines, both gasoline and diesel engines.
Compatible with the following models / types:
Agila, Astra, Corsa, Frontera, Meriva, Omega, Signum, Sintra, Speedster, Tigra, Vectra and Zafira.
Gasoline engines:
12V / 1.2 16V vanaf 1997 (Eco Tec) met motorcodes: X10XE / X12XE / Z10XE / Z12XE / Z10XEP / Z12XEP / Z14XEP / A10XEP / A12XER / B12XEL
1.4 / 1.6 / 1.8 / 2.0 / 2.2 16V vanaf 1995 (DOHC) met motorcodes: X14XE / X16XEL /X16SEJ / X18E1 / X18XE1 / Y16XE / Z14XE / Z16XE / Z18XE / Z18XEL / X18XE / C20SEL / X20XEV / Z20LET / X22XE / Y22XE / Z22XE / A14XEL / B14 NEH / A14NEL / B14NEL / B14NET / LUJ / LUV / LDD
Diesel engines:
1.3CDTi 16V / 1.9CDTi / 2.0DTi / 2.2DTi met motorcodes: Z13DT / X20DTL / X20DTH / Y20DTL / Y20DTH / X22DTH / Y22DTH / Y22DTR / Z19DT / Z19DTH / D223L
Engine codes:
169A1.000 / 188A8.000 / 188A9.000 / 199A2.000 / 199A3.000 / 199A9.000 / 199B1.000 / 199B4.000 / 199B8.000 / 223A9.000 / 225A2.000 / 263A2.000 / 263A6.000 / 312A8.000 / 312B1.000 / 312B2.000 / 330A1.000 / 330A1.000 / 55266963 / 955B2.000
A13DTC / A13DTE / A13DTE / A13DTR / A13FD / BAAA / FD4 / D13A / F13DTE5 (FHZ) / FHY / FHZ / FHZ (F13DTE5) / LDV / Y13DT / Z13DT / Z13DTH / Z13DTJ
Tire bead retainer
- facilitates wheel mounting on rim
- material = fiberglass
Protractor wrench / rotational angle gauge
This torque angle gauge is suitable for retightening of cylinder head bolts, among other things, under a certain number of degrees after tightening at a set moment.The protractor wrench can be used with a torque wrench, ratchet or socket wrench. The scale is clearly legible.Fixed with the clamping screw and adjustable locking pin.
1/2" internal and external
360 degrees, series in 2 degrees
Torque setting angular gauge
- for operation in combination with torque wrenches, ratchets, sockets and accessories
- to accurately set the degrees of turn required on certain applications
- drive = 1/2"
- diameter = 90mm
- 0 - 360 degrees, sequences in 2 degrees
Handy remover set This set is ideal for assembling or disassembling upholstery without damaging the car paint. Various types and models for rubber seals, dashboard, door panels, switches etc.
TU-114 Fuel pressure gauge for gasoline engines
This set is suitable for testing the fuel pressure of almost all injection systems, also suitable for injection systems with a Schrader test port.The pressure gauge is clearly legible, has 2 scales, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 410mm.The set consists of a number of adapters and fittings, components which are equipped with a quick coupling and a pressure relief valve. The pressure relief valve is equipped with a drain hose for the safe draining of fuel.
Universal caliper wind back kit
This set is suitable for turning and pushing back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.Suitable for almost any car brand.
Content:
1 spindle right thread
1 spindle left thread
2 positioning plates
17 adapter plates
Universal puller set
This very extensive universal puller set is suitable for disassembling crankshaft pulleys and crankshaft dampers, among other things. The set is also suitable for the power steering and dynamo pulley. The puller is suitable for pulling with 2 or 3 bolts and the flange is provided with bolt slots.
1x puller flange with 4 holes
1x small centering adapter
1x large centering adapter
1x flat shaft adapter
3x 35mm bolts, M10 x 1,5mm
3x 45mm bolts, M8 x 1,25mm
2x 65mm bolts, M8 x 1,25mm
2x 90mm bolts, M8 x 1,25mm
3x 1-1/2" bolts, 3/8", 24 thread
3x 2" bolts, 3/8", 16 thread
5x 3" bolts, 3/8", 16 thread
2x 4-1/2" bolts, 3/8", 16 thread
2x 6" bolts, 5/16", 18 thread
3x 3-1/2" bolts, 5/16", 18 thread
2x 2-1/2" bolts, 1/4", 28 thread
11x flat rings
Universal windscreen wiper arm puller - for removing of front and rear wiper arms - brass pressure sleeve prevents damage to the thread - 360 degrees rotatable puller arms - handwheel, no additional tool required - chrome plated base, press sleeve brass made hardened spindle
Valve lapping tool attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8mm shank - min. working speed = 1000rpm - max. working speed = 1250rpm - 4 suction plates = 20, 30, 35 and 45mm - 8mm shaft for attaching the suction cups
Valve spring plier / valve spring lifter
This heavy duty valve spring compressor is suitable for both old-fashioned and modern cylinder heads with deep-set valves. The valve spring plier is also suitable for larger cylinder heads due to the large lever and robust construction. The valve wedge cam be converted, making the valve spring compressor also suitable for smaller cylinder heads.
clamping range = 35 - 200mm
2 adapters with 25 and 30mm diameter
suitable for +/- 95% of the cars
suitable for both gasoline and diesel engines
Wheel bearing set universal
This set is suitable for mounting bearings and sealing rings. Especially useful when used with a hydraulic press.The set comes with a metal handle for use with a hammer and a length of 273mm and 17 mounting pads with a diameter of 70 tot 150mm.
