Foam tray nr6

- 1 straight pattern snip 10"
- 1 hand saw
- 1 snap off knife w/4pcs sk2-blade
- 1 stainless vernier caliper 6"
- 1 stainless protractor 14cm
- 1 flat file 8"
- 1 half round filel 8"
- 1 round file 8"
- 1 triangular file 8"
- 1 square file 8"
- 1 auto center punch
- 1 tungstan-carbide scriber
- 1 measuring tape 5mtr
- 1 adjustable wrench 10"

These trays fit these tool boxes:
99808G and 99808R

Foam tray nr 5

- 1 straight jaw locking plier 10"
- 1 box joint water pump plier 240mm
- 1 long nose plier 200mm
- 1 combination plier 200mm
- 1 heavy duty diagonal cutting plier 200mm
- 1 scraper 160mm
- 1 nail remover 200mm
- 1 pick up tool 125mm
- 1 pick up tool with hook 100mm
- 1 scraper 90mm
- 1 engineer hammer 300 gr
- 1 dead blow hammer 35 mm
- 3 chisels = 16x1/2"x180mm,18x1/2"x180mm, 24x1/2"x200mm

These trays fit these tool boxes:
99808G and 99808R

Foam tray no 4

- 16 combinationwrenches = 6,7,8,9,10,11,12,13,14,15,16, 17,18,19,22,24mm
- 8 offset ring wrenches = 6 x7 ,8x19 ,10x11 ,12x13 ,14x15, 16x17, 18x19, 21x23mm

These trays fit these tool boxes:
99808G and 99808R

Foam tray no 3

- 8 torx tarx screwdrivers = T8x60mm,TT10x80mm,
TT15x80mm,TT20x100mm,TT25x100mm,TT27x115mm,TT30x115mm,TT40x130mm

1/2" drive
- 9 star socket = E10,E11,E12,E14,E16,E18,E20, E22,E24
- 9 socket bits = TT30,TT40,TT45,TT50,TT55,TT60
T45x45mm,T55x140mm,T70x100mm

1/4"drive
- 5 star sockets = E4,E5,E6,E7,E8
- 18 socket bits = TT8,TT9,TT10,TT15,TT20,TT25,TT27,
TT30,TT40, T8,T9,T10,T15,T20,T25,T27,T30,T40,

- 4 star E type gear wrenches = E6xE8,E10xE12, E14xE18,E20xE24
- 10 star tamp L key = TT8,TT10,TT15,TT20, TT25,TT27,TT30,TT40,TT45,TT50

These trays fit these tool boxes:
99808G and 99808R

Foam tray No 2

- 16 screwdriver = SL3 x 75mm,SL3.5 x100mm SL4x100mm,SL5.5x125mm,SL5.5x38mm,SL6.5x38mm,
SL6.5x150mm,SL8x175,PHox60mm,PH1x80mm,
PH2x38mm,PH2x100mm,PZ0x60mm,PZ1x80mm,
PZ2x38mm,PZ2x100mm
- hex ball L key = 1.5,2,2.5,3,4,5,5.5,6,8,10mm
- bits 30 pcs with quick release chuck
- screwdriver holder,quick release
- screwdriver holder,quick release,stubby type

These trays fit these tool boxes:
99808G and 99808R

Foam tray no 1

1/4" drive:
- 12 sockets = 4, 4.5, 5, 5.5, 6 v/z 13mm
- 9 deep sockets = 4 v/z 12mm
- 18 socket bit = PH1, 2, 3 / PZ1, 2, 3 / SL4, 5.5, 7 / H3, 4, 5, 6, 8 / T20, 25, 30, 40
- 2 extention = 50, 100mm
- 1 spinner handle
- 1 universal joint
- 1 sliding t bar
- 1 ratchet handle quick release

3/8" drive
- 15 socket = 7 v/z 19, 21, 22mm
- 2 extention = 75, 150mm
- 1 universal joint
- 1 sliding t bar
- 1 ratchet handle quick release

1/2" drive:
- 16 sockets = 12 v/z 24mm, 27, 30, 32mm
- 2 extention = 125, 250mm
- 2 spark plug 16,21mm
- 1 universal joint
- 1 sliding t bar
- 1 ratchet handle quick release

These trays fit these tool boxes:
99808G and 99808R

For this tool trolley you can chose your own foam ore abs modulles .

Seneca tools is from the best quality and has a lifetime warrenty

For this tool chest you can chose your one foam ore abs modulles

Seneca tools is from the best quality and has a lifetime warrenty