Motorcycle special socket
For assembling and disassembling of the full floating axle of a motorcycle.
Suitable for:
- 19mm = Honda
- 22mm = Kawasaki, BMW
- 24mm = Suzuki, Honda, BMW K1, K1000
Ball joint extractor set
This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.This set comes in a handy plastic transport case.
Content:
1x steering fork 17mm opening
1x steering fork 24mm opening
1x steering fork 28mm opening
handle for manual use 200mm long
adapter for pneumatic use 180mm long
Ball joint puller
capacity = 12 - 50mm
Attention: this product can not be returned
Bearing puller set This bearing puller set is suited for the loosening of bearings, inner rings, bolts, nuts and pulleys. Content:
1 bearing splitter 30-50mm (1-1/4" - 2-1/4")
1 bearing splitter 50-75mm (2-1/4" - 3-1/4")
H-type puller head
forcing screw
2x 4" extension screw external and internal
2x 5" extension screw external and internal
2x 4" extension screw external
2x 5" extension screw external
Bearing puller set This bearing puller set is suited for the loosening of bearings, bolts, nuts and pulleys.
capacity = 20 - 100mm
1x bearing separator
4x main rod
1x H-beam
1x hydraulic ram
1x extension rod
Bearing race and seal driver set / seal mounting set
This set is suitable for assembling shafts, bearings and seals without damaging the housing of the shaft. The flanges are made of sturdy aluminum and go up to 81mm. This makes the set suitable for almost all standard wheel bearings. The flat side of the flange is used for the seals and the other side for installing the seal rings. The handle has a ribbed area for extra grip.
1x handle
9x aluminum flange = 39,5 / 44,5 / 50 / 59 / 63 / 65 / 72 / 76 and 81mm
drive = 14mm
Bench vice - size = 125mm - material = all steel - with slide adjustment and pipe jaws
Bench vice
size = 100mm
material = steel
offset
size = 150mm
adjustable guidance
large steel anvil
swivel base
size = 125mm
size = 200mm
Bench vise with pipe jaws
This XPTools steel vise offers many mounting and clamping options for all kinds of workpieces. The vice can be made rotatable using an optional swivel base.
Technical specifications:
jaw width = 100mm
anvil work surface = 65 x 45mm
diameter base = 125mm
clamping depth = 68mm
clamping range = 88mm
jaw width = 125mm
anvil work surface = 80 x 74mm
diameter base = 153mm
clamping depth = 83mm
clamping range = 150mm
jaw width = 150mm
anvil work surface = 93 x 97mm
diameter base = 166mm
clamping depth = 100mm
clamping range = 167mm
jaw width = 200mm
anvil work surface = 105 x 94mm
diameter base = 185mm
clamping depth = 113mm
clamping range = 204mm
Bihexagonal ringspanner set - deep offset - chrome vanadium steel - Din 838 - 8 pcs - sizes = 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 - 18x19 - 20x22
Body repair set / fender tool set
This body repair set is very suitable for dent removal and sheet metal work. The 7-piece set with 3 hammers is ideal for removing dents, shaping body panels and also for flaring a fender. The repair kit is suitable for all workshops, passionate hobbyists and car tuners. The set comes in a handy, plastic transport case.
1x bumping hammer
1x chisel end hammer
1x combi hammer
1x shrinking dolly
1x curved dolly
1x double end dolly
1x heel dolly
This body repair set is very suitable for dent removal and sheet metal work. The 9-piece set with 4 hammers, which are provided with a hickory wooden steel, is ideal for removing dents, shaping body panels and also for flaring a fender. The repair kit is suitable for all workshops, hobbyists and car tuners. The set comes in a handy, plastic transport case.
1x chisel hammer
1x pick hammer
1x door skin hammer
1x universal dolly
1x toe dolly
1x general spoon
1x light slapping spoon
