This Utilnova universal adapter is used to work with aluminum rims and is suitable for the REF04 plastic mounting head.
diameter = 28mm
diameter = 29mm
diameter = 30mm
Adapter
Suitable as a spare adapter for the quick-change system REF02.
distance between the bolt holes = 70mm
This Utilnova replacement plastic mounting head comes without adapter plate.
distance hole to hole = 70mm
prevents scratches on aluminum rims
suitable for automatic and semi-automatic machines
material = nylon
This Utilnova replacement plastic mounting head is suitable for motorcycle tires and comes without adapter plate.
distance of variable holes = 70 - 80mm
suitable for smaller tires of motorcycles, quads and trailers
This Utilnova universal quick head change kit is suitable for all types of tyre changers with an axle size of 28mm, except coats. The set is designed for use with both types of rims, steel and aluminum. Only a simple twist is needed to change from iron head to plastic.
With the help of this set the heads are easily changed and therefore you will always use the plastic head for aluminum rims and the iron head for steel rims.
axle size = 28mm
one-time calibration with a 16 inch rim
This Utilnova universal quick head change kit is suitable for all types of tyre changers with an axle size of 29mm, except coats. The set is designed for use with both types of rims, steel and aluminum. Only a simple twist is needed to change from iron head to plastic.
axle size = 29mm
This Utilnova universal quick head change kit is suitable for all types of tyre changers with an axle size of 30mm, except coats. The set is designed for use with both types of rims, steel and aluminum. Only a simple twist is needed to change from iron head to plastic.
axle size = 30mm
This Utilnova caramel rim cleaner is very suitable for removing, in particular, glue from wheel weights in the rim. The exclusive and well-considered design with conical shape distinguishes the rim cleaner from comparable tools on the market.
When the head is worn out, a clear warning follows. On the head itself it becomes visible that replacement is necessary to prevent damage to the rim.
speed = max. 4000rpm
This Utilnova professional tire bead press is suitable for dismantling all types of tires. Even the most difficult tires can be dismantled easily, such as run flat, low profile and SSR.
This Utilnova tire mounting ring is made of rubber and is very strong and elastic.
Using the ring, tires that have been stacked for a long time are easily inflated again and mounted on the rim.
suitable for rims of 10 to 13 inches
suitable for rims of 14 to 18 inches
suitable for rims of 19 to 21 inches
suitable for rims of 22,5 to 24 inches
This Utilnova tyre lever is suitable for steel rims.
The "hook" shape provides a better grip on the tire and releases less quickly.
length = 500mm
The protective sheath of this Utilnova tyre lever is made of a special chemical composition and is as strong as metal.
Prevents scratches on aluminum rims and decreases the chance of damaging the bead.
This Utilnova calibrated valve core remover is suitable for all type of valves and in particular for TPMS valves. The torque is set to 0.40Nm with which the valve core is tightened. The handy system in the head of the tool ensures that the valve core clicks in the tool and therefore does not get lost when loosening.
Can also be ordered in 0.25 and 0.45Nm.
The tools from this Utilnova 4 pieces valve core remover set have the handy system in the head of the tool which ensures that the valve core clicks into the tool and therefore does not get lost when loosening.
This Utilnova valve extractor is specially designed for all kinds of valves, but especially for TPMS valves.
Thanks to the handy tilting head, it is not necessary to screw the tool on the valve to pull it. The extractor also provides a secure point of support, with a suitable angle for quick and easy removal of the valve. The rubber and nylon finish also prevents damage to the rim.