Zwei Pole Brücke / Spindelbrücke / Autobrücke

Cascos car lifts are from 100% European production. Cascos has more than 50 years of experience in vehicle lifts, which results in a very reliable and extremely strong end product.
At Cascos lifts, three key words are central, namely: Reliability, functionality and safety.

The robust construction of the lifts and the high quality of the components ensure high reliabilty and low maintenance costs.
The double and triple long arms ensure that both symmetrical and asymmetrical work can be performed and ensures a very comfortable and fast positioning of the arms in the picking points, without taking a long time to perfectly center a vehicle.
The robust columns, the steel bearings, but especially the safety nuts ensure a very high safety.

Furthermore, the Cascos two pole lifts have a number of very thoughtful features:

• SlenderTec solid columns: Very robust, 10 to 23mm thick.

• Extendable symmetrical arms: Lifts have been developed to withstand the maximum load at any angle and all lengths.

• Large spindle diameter: 45mm, the largest spindle on the market. Provides less friction and therefore less wear on the working nut. Less lubrication is required.

• Steel bearings: Less wear and compared to nylon systems because they last longer. They also provide support for the columns.

• Safety nuts: Extra sturdy for lifts with a capacity up to 5500kg.

Thanks to the hight capacity of 4 tons, the design without base and the large reach of the lifting arms, this Cascos lift is indispensible in every professional garage or workshop. The lift is very versatile and suitable for almost every vehicle.

This lift has the following thoughtful features:

• ILC-system (Intelligent Lift Control): An innovative control system that controls the operation of the lift and can display the following on the LCD screen: safety warnings, useful information about the operation of the lift, operational reports, maintenance reports and troubleshooting.

• Electrical synchronization with electronic board and detectors: The electronic board is programmable and protected against voltage changes, and short circuits. In addition, this system enables quick and easy identification of the operating status of the lift and ables ILC system operating.

• Independent motors in each column.

• Level is controlled through 4 inductive sensors that ensure absolute synchronisation of the lift, so it is less sensitive to floor leveling and cable balancing, making it easy to work with very long vehicles.

• It is possible to connect both the motor through inground installation and work without arch for the same price. Ask one of our employees for the possibilities.

• Floorless: provides optimum working space between the columns.

• Both symmetrical and asymmetrical arms: 4 arms that extend 3 times.

• Double screw spindles for extra high picking.

Specifications:

• capacity = 4000kg

• voltage = 400V / 3-fase

• motor power = 3 + 3kW

• minimum height = 100mm

• maximum height = 1970mm

• lifting time = 45 seconds

• distance between the columns = 2700mm

• height of the columns = 2435mm

• total height = 4250mm

• range of triple arms = 668 - 1341mm

• total weight = 750kg

Note: The price for this lift does not include the delivery and placement of the lift. For more information regarding installation and service contracts you can contact one of our employees.

Zwei Pole Brücke / Spindelbrücke / Autobrücke

Cascos car lifts are from 100% European production. Cascos has more than 50 years of experience in vehicle lifts, which results in a very reliable and extremely strong end product.
At Cascos lifts, three key words are central, namely: Reliability, functionality and safety.

The robust construction of the lifts and the high quality of the components ensure high reliabilty and low maintenance costs.
The double and triple long arms ensure that both symmetrical and asymmetrical work can be performed and ensures a very comfortable and fast positioning of the arms in the picking points, without taking a long time to perfectly center a vehicle.
The robust columns, the steel bearings, but especially the safety nuts ensure a very high safety.

Furthermore, the Cascos two pole lifts have a number of very thoughtful features:

• SlenderTec solid columns: Very robust, 10 to 23mm thick.

• Extendable symmetrical arms: Lifts have been developed to withstand the maximum load at any angle and all lengths.

• Large spindle diameter: 45mm, the largest spindle on the market. Provides less friction and therefore less wear on the working nut. Less lubrication is required.

• Steel bearings: Less wear and compared to nylon systems because they last longer. They also provide support for the columns.

• Safety nuts: Extra sturdy for lifts with a capacity up to 5500kg.

This Comfort model without base has a capacity of 3,2 tons and has the following features:

• ILC-system (Intelligent Lift Control): An innovative control system that controls the operation of the lift and can display the following on the LCD screen: safety warnings, useful information about the operation of the lift, operational reports, maintenance reports and troubleshooting.
  

• Electrical synchronization with electronic board and detectors: The electronic board is programmable and protected against voltage changes, and short circuits. In addition, this system enables quick and easy identification of the operating status of the lift and ables ILC system operating.
  

• Independent motors in each column.

• Level is controlled through 4 inductive sensors that ensure absolute synchronisation of the lift, so it is less sensitive to floor leveling and cable balancing, making it easy to work with very long vehicles.

• It is possible to connect both the motor through inground installation and work without arch for the same price. Ask one of our employees for the possibilities.

• Floorless: provides optimum working space between the columns.

• Both symmetrical and asymmetrical arms: 2 arms that extend 2 times and 2 arms that extend 3 times.

• Double screw spindles for extra high picking.

Specifications:

• capacity = 3200kg

• voltage = 400V / 3-fase

• motor power = 2,2 2,2kW

• minimum height = 100mm

• maximum height = 1960mm

• lifting time = 45 seconds

• distance between the columns = 2700mm

• height of the columns = 2435mm

• total height = 4250mm

• range of double arms = 710 - 1050mm

• range of triple arms = 597 - 1122mm

• total weight = 600kg

Note: The price for this lift does not include the delivery and placement of the lift. For more information regarding installation and service contracts you can contact one of our employees.

Zwei Pole Brücke / Spindelbrücke / Autobrücke

Cascos car lifts are from 100% European production. Cascos has more than 50 years of experience in vehicle lifts, which results in a very reliable and extremely strong end product.
At Cascos lifts, three key words are central, namely: Reliability, functionality and safety.

The robust construction of the lifts and the high quality of the components ensure high reliabilty and low maintenance costs.
The double and triple long arms ensure that both symmetrical and asymmetrical work can be performed and ensures a very comfortable and fast positioning of the arms in the picking points, without taking a long time to perfectly center a vehicle.
The robust columns, the steel bearings, but especially the safety nuts ensure a very high safety.

Furthermore, the Cascos two pole lifts have a number of very thoughtful features:

• SlenderTec solid columns: Very robust, 10 to 23mm thick.

• Extendable symmetrical arms: Lifts have been developed to withstand the maximum load at any angle and all lengths.

• Large spindle diameter: 45mm, the largest spindle on the market. Provides less friction and therefore less wear on the working nut. Less lubrication is required.

• Steel bearings: Less wear and compared to nylon systems because they last longer. They also provide support for the columns.

• Safety nuts: Extra sturdy for lifts with a capacity up to 5500kg.

This Comfort model lift with base has a capacity of 3,2 tons and has the following features:

• Single motor: 3-phase, 400V

• Mechanical synchronization.

• Stable, sturdy floor plate.

• Both symmetrical and asymmetrical arms: 2 arms that extend 2 times and 2 arms that extend 3 times.

• Double screw spindles for extra high picking.

Specifications:

• capacity = 3200kg

• voltage = 400V / 3-fase

• motor power = 3,7kW

• minimum height = 100mm

• maximum height = 1960mm

• lifting time = 45 seconds

• distance between the columns = 2700mm

• height of the columns = 2435mm

• range of double arms = 710 - 1050mm

• range of triple arms = 597 - 1122mm

• total weight = 600kg

Note: The price for this lift does not include the delivery and placement of the lift. For more information regarding installation and service contracts you can contact one of our employees.

Adapterplatte

Suitable for the post lifts VL35F230, VL35F230B and VL35F400.

Zwei Säulen Hebebühne

Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications. 

The "Classic" model is a very and succesful and reliable model. Due to its simple but sturdy structure, the lift has no weak superfluous components and is extremely durable. Thanks to the new manual sync lock system, the lift can easily be unlocked on both sides with just one action.

Features:

• double telescopic extendable lifting arms

• sync lock system

• good quality hydraulic pump

• in height adjustable lifting pads

• automatic support arm locking

• fully automatic electric detent

• protective rubbers door stop

• foot protection at every lifting arm

• protective caps on the inside of the columns

• robust columns manufactured from rolled steel

• hydraulic cylinder on both sides

• extreme low threshold of 45mm

• dead mans switch for lifting and lowering

• automatic protection against overcharge

• height limit switch

• 12 heavy M18 security bolts

All of Falco's car lifts comply with the NEN-EN1493 safety standard and are supplied with a Dutch manual including maintenance protocol and CE certificate 2006/42/EC.

No time for installation?

Our professional installation team is specialized in the installation of Falco lifts!

Your bridge will be installed in a correct way.
The team thinks along with you about the position and placement of the lift.

For the above price is our installation team within a radius of 100km on site including 3 hours of labor for installation.

For the extended activities which are not included, there will be a hourly rate of € 75,00 excl. VAT.
For distances beyond the radius of 100km, we will charge 1,00 euro per kilometer.

Note!
The surface must at least meet the following requirements:
- concrete strength C20 - C25 250kg/com
- 200mm thickness
- newly poured concrete needs to cure for 28 days
Ask for the manual for more information about the surface requirements.

Transport of the lift is not included and depends on the unloading facilities.
Consult us first to make a suitable appointment for this.

Zwei Säulen Hebebühne

Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications.
The "Premium" fully automatic model is a very complete and reliable model, making the lift suitable for a large number of vehicles.

Features:

• double and triple telescopic extendable lifting arms

• steel cable synchronization control

• quality hydraulic pump incl. cooling fins

• clear oil reservoir incl, oil level

• foot protection incl. acoustic security signal

• turns off when the highest position is reached

• in height adjustable lifting pads with double spindles

• automatic support arm locking

• fully automatic electric detent

• protective caps on the inside of the columns

• protective rubbers door stop

• robust columns manufactured from rolled steel

• hydraulic cylinder on both sides

• extreme low threshold of 45mm

• dead man's switch for lifting and lowering

• automatic protection against overcharge

• height limit switch

• 12 heavy M18 security bolts

All of Falco's car lifts comply with the NEN-EN1493 safety standard and are supplied with a Dutch manual including maintenance protocol and CE certificate 2006/42/EC.

Zwei Säulen Hebebühne

Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications.

The "Premium" fully automatic model is a very complete and reliable model, making the lift suitable for a large number of vehicles.

Features:

• double and triple telescopic extendable lifting arms

• steel cable synchronization control

• quality hydraulic pump incl. cooling fins

• clear oil reservoir incl, oil level

• foot protection incl. acoustic security signal

• turns off when the highest position is reached

• in height adjustable lifting pads with double spindles

• automatic support arm locking

• fully automatic electric detent

• protective caps on the inside of the columns

• protective rubbers door stop

• robust columns manufactured from rolled steel

• hydraulic cylinder on both sides

• extreme low threshold of 45mm

• dead man's switch for lifting and lowering

• automatic protection against overcharge

• height limit switch

• 12 heavy M18 security bolts

All of Falco's car lifts comply with the NEN-EN1493 safety standard and are supplied with a Dutch manual including maintenance protocol and CE certificate 2006/42/EC.

Zwei-Säulen-Hubbrücke / Zwei-Pfahl-Brücke / 2-Säulen-Hubbrücke

Dank der durchdachten Konstruktion der Falco-Brücken sparen Sie Zeit und Mühe. Der Fokus liegt auf einer einfachen Bedienung und einem effizienten Arbeitsablauf. Die verschiedenen Modelle werden für verschiedene Anwendungen entwickelt. Der PremiumPlus ist ein vollautomatisches und barrierefreies Modell, wodurch diese Brücke sehr vollständig und für eine große Anzahl verschiedener Fahrzeuge geeignet ist. Die Falco Sollevatori Premium-Serie hat sich über die Jahre als sehr zuverlässige und vielseitig verwendbare Brücke bewährt, für fast alle gängigen Autos.

Eigenschaften:

• Bodenlos / barrierefrei

• Doppelt und dreifach teleskopisch verstellbare Querlenker

• Stahlseil-Synchronisationskontrolle (Synchronisation)

• Qualitätshydraulikpumpe inkl. Kühlrippen

• 24-V-Schaltkasten

• Transparenter Ölbehälter inkl. Öl Level

• Fußschutz inkl. akustisches Sicherheitssignal

• Ausstieg bei Erreichen der höchsten Position

• Höhenverstellbare Trageplatten mit Doppelspindeln

• Standard erhöhte Pickup-Busse

• Automatische Querlenkersperre

• Vollautomatische elektrische Arretierung

• Schild in der Säule

• Kettenschutz

• Robuste Säulen aus Walzstahl

• Schutzgummis durch Anschlag

• Hydraulikzylinder auf beiden Seiten

• Totmannbetrieb beim Heben und Senken

• Automatischer Überlastschutz

• Höhenbegrenzungsschalter

• 12 schwere M18 Verriegelungsbolzen

Alle Falco-Autobrücken entsprechen der Sicherheitsnorm NEN-EN1493 und werden mit einem niederländischen Handbuch einschließlich Wartungsprotokoll und CE-Zertifikat 2006/42/EG geliefert.

Zwei-Säulen-Hubbrücke / Zwei-Pfahl-Brücke / 2-Säulen-Hubbrücke

Dank der durchdachten Konstruktion der Falco-Brücken sparen Sie Zeit und Mühe. Der Fokus liegt auf einer einfachen Bedienung und einem effizienten Arbeitsablauf. Die verschiedenen Modelle werden für verschiedene Anwendungen entwickelt. Das vollautomatische Modell Titan hat eine große Reichweite, ist ein sehr komplettes und zuverlässiges Modell, wodurch die Hebebühne besonders für große Fahrzeuge geeignet ist.

Eigenschaften:

• Große dreifach teleskopisch verstellbare Querlenker

• Stahlseil-Synchronisationskontrolle (Synchronisation)

• Qualitätshydraulikpumpe inkl. Kühlrippen

• 24-V-Schaltkasten

• Transparenter Ölbehälter inkl. Öl Level

• Fußschutz inkl. akustisches Sicherheitssignal

• Ausstieg bei Erreichen der höchsten Position

• Höhenverstellbare Trageplatten mit Doppelspindeln

• Automatische Querlenkersperre

• Vollautomatische elektrische Arretierung

• Schutzkappe in der Säule

• Robuste Säulen aus Walzstahl

• Türstopper aus Gummischutz

• Hydraulikzylinder auf beiden Seiten

• Totmannbetrieb beim Heben und Senken

• Automatischer Überlastschutz

• Höhenbegrenzungsschalter

• Befestigungsset Bodenmontage

• Satz von 70 mm Höhenadaptern (4 Stück)

Alle Falco-Autobrücken entsprechen der Sicherheitsnorm NEN-EN1493 und werden mit einem niederländischen Handbuch einschließlich Wartungsprotokoll und CE-Zertifikat 2006/42/EG geliefert.