Start booster / capacitor booster / start aid / jump starter
This professional Fluxon 12/24V battery-free starter booster with capacitor is very suitable for starting cars, trucks, motorcycles, tractors and small boats. The booster is equipped with so-called ultracapacitators, also known as capacitors. This system requires no maintenance and is charged by the residual voltage of the vehicle battery. The big advantage of this type of starter booster is that it has no battery, charging can be done by connecting the booster to the battery terminals of a running vehicle. It is therefore advisable to charge the booster on the battery of the vehicle after each use, so the booster is immediately ready for the next job. The charging time is on average 8 to 40 seconds, depending on the type of vehicle. Charging on mains voltage is also possible, the charging time differs per model and averages 3 to 8 hours. The booster always remains operational. Even after years of storage, it is ready to start after a short charging cycle.
The powerful start booster is very resistant and therefore suitable for all professional interventions and repairs. In addition, the booster does not lose power at extreme temperatures, the booster is protected against short circuit and polarity reversal, the booster is protected from peak points and the electronics of the vehicle are protected. The weight has been reduced to a maximum, which is why the booster can also be used as a portable energy source. Furthermore, the booster starts both petrol and diesel engines and the device checks the capacity of the vehicles alternator.
Each capacitor start booster is standard equipped with a self-regulating charger (230V), durable high quality insulated battery clamps and ABS shockproof housing.
Specifications:
voltage = 12V / 24V
starting current = 4400A
peak current = 6000A
output voltage = 12V / 1,5A
exciting current unloaded = 50mA max
exciting current belast = 90mA max
output voltage unloaded DC = 14,9V
cable length = 1200mm
cable diameter = 50mm²
This professional Fluxon 12V battery-free starter booster with capacitor is very suitable for starting cars, motorcycles, tractors and small boats. The booster is equipped with so-called ultracapacitators, also known as capacitors. This system requires no maintenance and is charged by the residual voltage of the vehicle battery. The big advantage of this type of starter booster is that it has no battery, charging can be done by connecting the booster to the battery terminals of a running vehicle. It is therefore advisable to charge the booster on the battery of the vehicle after each use, so the booster is immediately ready for the next job. The charging time is on average 8 to 40 seconds, depending on the type of vehicle. Charging on mains voltage is also possible, the charging time differs per model and averages 3 to 8 hours. The booster always remains operational. Even after years of storage, it is ready to start after a short charging cycle.
Each capacitor start booster is standard equipped with a self-regulating charger (230V), durable high quality insulated battery clamps and ABS shockproof housing. The battery clamps are equipped with an extra switch, with which the current can be disconnected from the clamps at any time. This provides extra safety.
voltage = 12V
starting current = 1400A
cable length = 900mm
cable diameter = 25mm²
Start booster / battery booster / start aid / jump starter
This professional Fluxon 12/24V battery starter booster is very suitable for starting cars, trucks, motorcycles, tractors and small boats. The powerful starter booster is very resistant and therefore suitable for all professional interventions and repairs. The booster is protected against short circuit and polarity reversal, the booster is protected against peak points and the electronics of the vehicle are protected. The weight has been reduced to a maximum, which is why the booster can also be used as a portable energy source.Furthermore, the booster starts both petrol and diesel engines and the device checks the capacity of the vehicles alternator.Each battery starter booster is standard equipped with a self-regulating charger (230V), durable high quality insulated battery clamps and ABS shockproof housing.
battery = 2x 22Ah AGM lead/acid battery
starting current = 2000A
peak current = 6200A / 3100A
exciting current loaded = 90mA max
output voltage DC = 24V
output current = 2000mA
output voltage unloaded DC = 14,6 - 15,0V
cable length = 1400mm
Der Fluxon Multifunktions-Starthilfe 12V 2500Amp ist nicht nur ein durchschnittlicher Starthelfer. Es ist eine 4 in 1 tragbare Batteriestation, die nicht nur Ihr Fahrzeug wieder in Gang bringt, sondern auch als Hochleistungsausgang für Ihre Elektronik dient. Es ist mit einem 12 V Kompressor zur Aufpumpung Ihrer Reifen integriert und mit einer tragbaren LED COB Lampe ausgestattet, was es zu Ihrem umfassenden Notfallhelfer macht!
This professional Fluxon 12V battery starter booster is very suitable for starting cars, motorcycles, tractors and small boats. The powerful starter booster is very resistant and therefore suitable for all professional interventions and repairs. The booster is protected against short circuit and polarity reversal, the booster is protected against peak points and the electronics of the vehicle are protected. The booster is equipped with a USB port and is very light. Because of this lightweight, the booster can also be used as a portable energy source. For example, phones and tablets can also be loaded with it. Furthermore, the booster starts both petrol and diesel engines and the device checks the capacity of the vehicles alternator.Each battery starter booster is standard equipped with a self-regulating charger (230V), durable high quality insulated battery clamps and ABS shockproof housing.
battery = 1x 15Ah AGM lead/acid battery
starting current = 530A
peak current = 2000A
output voltage DC = 12V / 1,5A
cable length = 420mm
Charger
This charger is suitable for the battery start booster BCP1224V.
input = 100 - 200VAC
output = 15V 2A
length = 4m
including 5A glass fuse
This charger is suitable for the battery start booster BCP12V.
input = 100 - 240VAC 50/60Hz
output = 12VDC 1200mA
length = 1,8m
Ladegerät
Dieses Ladegerät ist für den Kondensatorstartbooster BCP12C und BCP1224C geeignet.
Eingang = 100 - 240VAC 50/60Hz
Ausgang = 15VDC 3A
Länge = 4m
Sicherung
Geeignet für Startgerät.
1000A
500A