LED Balken This Fluxon LED spotlight has an "E" mark. This means that this light has been approved, on the basis of European regulations, to be carried on a vehicle. Light with an "E" quality mark may therefore be used on public roads. However, spotlights with an "E" quality mark may only be used outside the urban area. It is also not allowed to use high beam within the urban area. Therefore it is mandatory to connect this light separately from the normal light and make it possible to switch it on and off. Specifications: - nominal voltage = 12 / 24V - current draw (12/24V) = 7,1 / 3,5A - nominal power = 120W - raw lumens = 9600Lm - color temperature = 6000K - protection grade = IP67
- Including mounting kit.
This Fluxon LED floodlight has an "E" mark. This means that this light has been approved, on the basis of European regulations, to be carried on a vehicle. Light with an "E" quality mark may therefore be used on public roads.However, spotlights with an "E" quality mark may only be used outside the urban area. It is also not allowed to use high beam within the urban area. Therefore it is mandatory to connect this light separately from the normal light and make it possible to switch it on and off.Specifications:
nominal voltage = 12 - 24V DC
current draw (12/24V) = 0,45 / 0,17A
nominal power = 5W
raw lumens = 510Lm
color temperature = 6000K
protection grade = IP67
LED Leuchte This Fluxon 12/24V LED light has three small LEDs, each with a power of 1,5W. The total light output is 570Lm. The light can be use for all kinds of applications, such as on trucks, cars, boats, ATVs and any other 12V system. The light comes with the two mounting rubbers: flat and round. Specifications: - nominal voltage = 10 - 30V DC - current draw (12/24V) = 0,38 / 0,19A - nominal power = 3x 1,5W - raw lumens = 570Lm - color temperature = 6000K - protection grade = IP67