Pallet truck / hand pallet truck / pump cart

This steel industrial grade Mammuth pallet truck is suitable for daily use and guarantees a long service life. The pallet truck is equipped with polyurethane wheels, weather-resistant and silent.

Jobsite box / tool chest / trailer box checkerplate

This Toolbox4you storage box is made of aluminum. This makes the box extremely suitable for outdoor use in various weather conditions.

The box is equipped with one stainless steel lock at the front, so that your materials are safely behind lock and key.

Thanks to the two sturdy handles on the sides of the box, it is easy to move.

• dimensions = 1230 x 380 x 380mm

• inside dimensions = 1190 x 330 x 375mm

• depth with lid open = 440mm

• material = 1.5mm fully welded aluminium checkerplate

• splash proof

• 3'' stainless steel hinges

Suction and pressure hose

Light duty PVC suction hose with synthetic spiral
For industrial and agricultural use

Color: light green

•2-1/2''
•I.D. x O.D. = 64 x 73mm
•length = 30m
•working pressure = 6bar
•weight = 33kg / roll

Also available a meter

Pallet truck galvanized model / double load rollers
This galvanized industrial grade Mammuth handpallettruck / pallettruck is suitable for daily use and guarantees a long service life. The pallet truck is equipped with nylon steering and fork wheels.

Specifications:

• capacity = 2500 kg

• fork length and width = 1150 x 150mm

• maximum lifting height = 200mm

• minimum height = 85mm

• fork & steering wheel = nylon

Welding glass set

• 5x outside glass

Suitable for the INE automatic welding helmet Smart

Holder for screwdrivers / screwdriver holder

This screwdriver holder offers space for 11 screwdrivers, to be used on the following tool walls from the expert series and workbenches:

• BG62BP
• BG62BPS
• BG75BP
• WBG01
• WBG02
• WBG03

Carbide cutter

This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.

Can be used on straight grinders and pneumatic grinders.

Technical specifications:

• shape = H flame

• thickness = FLF, DIN shape for tungsten carbide burrs

• diameter milling part = 12.7mm

• diameter shaft part = 6mm

• length of milling part = 32mm

• total length = 77mm

Headlight tester

This headlight tester is suitable for testing the headlights of cars, motorcycles and heavier vehicles. This for the purpose of inspection and correct adjustment of the headlights.
The height is easy to adjust and the device has a rotating mirror.
Furthermore, the device does not require power, because it runs on a battery.

• min. working height = 230mm

• max. working height = 1350mm

Features:

• plastic lens

• mirror visor

• digital luxmeter

• spirit level

• fixed inclination

• sliding mechanism to adjust the height
  

Power distributor

This Fluxon power distributor is ideal for using on construction sites and such.
The open space under the box and the lockable cover provide protection against water and other liquids.

Features a handle, shackles, power breaker and 2 meters of cable.

Input:

• CEE plug 63A / 5-pole / 400V

Output:

• 2x CEE socket 16A / 5-pole / 400V

• 2x CEE socket 32A / 5-pole / 400V

• 1x CEE socket 63A / 5-pole / 400V

• 4x socket (DIN49440) 16A / 230V

Pneumatic oil extractor

- provided with strainer
- air inlet pressure = 6 ~ 8bar / 87 ~ 116psi
- ejection pressure = 0,7 ~ 1bar / 10 ~ 15psi
- air consumption = 150L/min
- vacuum degree = 0 ~ -1bar / -15psi
- tank capacity = 65L
- oil tray volume = 16L
- working temperature = 40 ~ 60degrees celcius

Suction probes:
- suction probes = diam. 5 x L80cm (PCV) = 1,9L/min
- suction probes = diam. 6 x L80cm (PCV) = 3,2L/min
- suction probes = diam. 6 x L70cm (PVC) = 4,2L/min
- suction probes = diam. 8 x L70cm (PVC) = 6,2L/min
- suction probes = diam. 6 x L80cm (PVC) = 3,7L/min
- suction probes = diam. 8 x L80cm (PVC) = 5,2L/min

Cleaning fluid / biological degreaser

The Ecowave PWB20S Blueliquid degreaser has been specially developed for cleaning parts in the Ecowave biological parts washers. The environmentally conscious liquid is biodegradable, does not attack surfaces, contains no hydrocarbons and chlorine and is non-flammable.

The degreaser is used in combination with the Bluetablet. The liquid needs one tablet every 4 to 6 weeks to extend its life and maintain strength. This makes working with the Ecowave biological parts washers environmentally friendly and cost-effective.

• content = 20L

• color = light blue

• no smell

• acidity = 9 - 9,7 pH

• operating temperature = 20 - 45 degrees Celsius (38 degrees is optimal)

Hydraulic crimping tool

- crimping range = 16-400mm^2

- crimping force = 1,55 bar

- crimping type = hexagon

- stroke = 22mm

- crimping dies = 16,25,35,50,70,95,120,150,185,240,300,400mm2

Stand for rotary machine

This stand is suitable for the rotary machine RM018.

MIG/MAG 350A welding inverter / synergetic inverter / welding machine

This Soldatech powered by HG MIG / MAG welding machine is standard equipped with a carrying platform to attach the gas bottle. This machine makes it possible to carry out various welding processes with ease, including MIG welding and also electrode welding.

The modern IGBT inverter technology ensures that the ML350YHG delivers sustainable performance with more power and a very high duty cycle. The ML350YHG is also equipped with thermal safety as standard, which in combination with a built-in fan prevents overheating and ensures that high-quality welding performance is guaranteed for a long time.

Furthermore, the mobile wire feed unit is equipped with a control panel on which welding voltage and current strength, among other things, can be easily adjusted. The power source is also equipped with preprogrammed synergetic programs for welding various materials.

The hot-start/anti-stick function increases the welding current quickly, so that the electrode does not stick to the workpiece during ARC welding.

Ideal for welding stainless steel, carbon steel, low alloy steel and aluminium (without pulse).

Each ML350YHG comes standard including:

• Soldatech MLT36M4 MIG torch with Euro connector and 4m cable

• Workpiece clamp with 3m 35mm² cable

• Standard 13mm Dinse cable coupling

• Gas pipe of 7m with quick coupling

• 5m cable grommet between cable package

• 5-pin 32A plug with 3.5m 4x4mm² cable

• 4x wire drive roll: 2x 0.8 + 1.0 and 2x 1.2 + 1.6

Technical specifications:

• voltage = 400V - 3 phases

• frequency = 50/60Hz

• circuit breaker = 32A B-char
  

• input power = 16.8kVA
• start-up voltage = 73V
• duty cycle (at 20°C ambient temperature) = 100% - 350A
• duty cycle (at 40°C ambient temperature) = 60% - 350A
  
• welding current range MIG/MAG = 40 - 350A
• welding current range MMA = 40 - 350A

• weldable welding wire = 0.8 / 1.0 / 1.2 / 1.6

• protection class = IP21S

• dimensions = 1000 x 420 x 1200mm

• weight = 69kg

Wheelbarrow wheel air

Suitable for the Torso wheelbarrow WB02A. Supplied with bearings and a shaft with bolts, rings and plastic covers.

• wheel size = 400 x 100mm

• axle size = 20mm

• axle hub length = 80mm

• axle length = 128mm

• screw thread axle = M10

MIG/MAG 500A welding inverter / synergetic inverter / welding machine

This Soldatech powered by HG MIG / MAG welding machine can be set both synergistically and manually, equipped as standard with a solid trolley that can easily hold a 50L bottle. This synergetic machine makes it possible to perform various welding processes including MIG welding and also electrode welding with ease.

The modern IGBT inverter technology ensures that the ML500YHG delivers sustainable performance with more power and a very high duty cycle. The ML500YHG is also standard equipped with a powerful water cooler that, in combination with a built-in fan, prevents overheating and ensures high-quality welding performance is guaranteed for a long time.

The mobile wire feeder unit is also equipped with a control panel on which the welding voltage and current, among other things, can be easily adjusted. The power source is also equipped with preprogrammed synergetic programs for welding various materials.

Ideal for welding stainless steel, carbon steel, low alloy steel and aluminium (without pulse).

Each ML500YHG comes standard with:

• Water-cooled Soldatech MLT501M4 MIG torch

• Welding ground clamp with 3m 50mm² cable

• European dinse couplers 13mm

• Gas line including quick coupling 12m

• Intermediate connection bundle 5m 

• 5-pin 32A plug with 3m 4x4mm² cable

• 4x wire feed roll: 2x 0.8 + 1.0 and 2x 1.2V + 1.6V

Technical specifications:

• voltage = 400V - 3 phase

• frequency = 50/60Hz

• circuit breaker = 32A B-char

• input power = 27.5kVA

• no load voltage = 73V

• duty cycle (at 20°C ambient temperature) = 100% - 500A

• duty cycle (at 40°C ambient temperature) = 60% - 500A
  

• welding current range MIG/MAG = 40 - 500A

• welding current range MMA = 40 - 490A

• weldable welding wire = 0.8 / 1.0 / 1.2 / 1.6mm

• cooling unit content = 6L

• protection class = IP21S

• dimensions = 1133 x 498 x 1508mm

• weight = 112kg

Hydraulic crimping tool

This tool is a professional tool for crimping copper and aluminium lugs in different types from 10mm2 till 300mm2.

- crimping range = 16-300mm2
- crimping force = 100kn
- stroke = 22mm

Including crimping profiles:
16,25,35,50,70,95,120,150,185,240,300mm2

Headlight tester set / headlight adjustment set

This headlight tester set includes rails, H-base and headlight tester. The headlight tester set is suitable for testing the headlights of cars, motorcycles and heavier vehicles. This is for the purpose of inspection and correct adjustment of the headlights. The professional headlight adjustment device has a built-in laser and a digital lux meter. The height is easy to adjust and the device has a rotating mirror. The dip in the dim/fog light can be read with an accuracy of 0,1%, the total adjustment range is -0,2 / +8%. Also comes with a mobile undercarriage and can be used on rails and mobile.

min. working height = 200mm

max. working height = 1500mm

Features:

• glass lens

• built-in laser

• mirror visor

• digital lux meter

• level

• 8% infinitely adjustable inclination angle

• sliding mechanism to adjust the height

• suitable for APK

Clutch aligning set

This universal centering set is suitable for very accurate and simple centering of the clutch plate on vehicles with top bearing.

Content:

• 1x centering mandrel with screw thread

• 8x adapter in sizes: 11 x 18mm, 12 x 18mm, 15 x 18mm, 17 x 18mm, 19 x 18mm, 20 x 18mm, 21 x 18mm, 25 x 18mm

• 1x conical adapter for larger sizes

This engine leveler is specifically designed for engine cranes or hoists to balance a load during lifting.

Adjust the load's center of gravity by turning the handle.

• capacity = 680kg