Back in stock


One of our goals is to have everything directly available from our stock, however sometimes a product might be temporarily sold out. On this page, you can find all items, which are back in our stock.

Strainer for oil extraction unit [S2097] Strainer for oil extraction unit
mm mm mm Kg

Suitable for the oil extraction units OD2081, OD2085 and OD2097.

Shop equipment / Fluid distribution / Attachments Mammuth S2097 8720028068623
€ 15.13 Incl. VAT https://schema.org/InStock
€ 15.13 15.13 EUR
Remote control electric cable hoist 400/800kg [HC0800B] Remote control electric cable hoist 400/800kg
mm mm mm Kg

Remote control electric cable hoist

- capacitor = 50uf

Suitable for the electric cable hoist HC0800E.

Lifting and hoisting tools / Electric hoist / Attachments Torso HC0800B 8720028076123
€ 30.25 Incl. VAT https://schema.org/InStock
€ 30.25 30.25 EUR
Remote control electric cable hoist 100/200kg [HC0200B] Remote control electric cable hoist 100/200kg
mm mm mm Kg

Remote control electric cable hoist

Suitable for the electric cable hoist HC0200E.

Lifting and hoisting tools / Electric hoist / Attachments Torso HC0200B 8720028076178
€ 30.25 Incl. VAT https://schema.org/InStock
€ 30.25 30.25 EUR
Bike lift 100kg 230V [HCB0200S] Bike lift 100kg 230V
mm mm mm Kg

electric bicycle lift / bike lift / motorized storage lift
Electric bicycle lifts from the Torso brand have a number of advantages over other models on the market. It has an electric motor that lifts the bicycle for you with a remote control, and can generally also lift heavier loads. Maximum load capacity is higher with an electric bicycle lift than with non-electric bicycle lifts. With a small weight, approximately 11 kg the motorized storage lift has a maximum draw weight of 100 kg. Comes with mounting material to attach the lift to the ceiling and has a built-in emergency stop.

Electric bicycle lifts are still the most ergonomic solution. The bike lift ensures that you can store your bike compactly. You elevate the bike high enough, the model has a maximum mounting height of 3 meters this should certainly suffice for most garages, sheds and workshops, and therefore you have enough space, for example, to park your car.

The rubber mounting hooks provide protection against scratches. The lifting straps are made of high-quality nylon and the frame is made of steel.

By using this lift you can easily elevate bicycles and similar vehicles for maintenance, storage or repair.

Except bicycles, this mini winch is ideally allowed to quickly lift many more objects like e-bikes, rooftop tents, roof boxes, ladders, kayaks and much more things, without taking up much space.

The device is supplied including the necessary mounting material: the central part consists of various straps attached to it for a secure bike suspension. Due to the strong lifting strap, your bike wont twist when suspende. Bike lift hoist is equipped with a wired remote control including an electrical emergency stop for both tape entry and exit.
The product is produced according to European guidelines.
Specifications:

  • Lifting capacity: 100 kg
  • Voltage: 230 V / 50 HZ
  • Current: 2.0 A
  • Input power: 450W
  • Insulating grade: B
  • Protection grade: IP54
  • Lifting height: 3m
  • Lifting speed: 8m/min
  • Work rate: S3 - 25% - 10min
  • Group of mechanisms: M1
  • Remote control cable length: 3 meters
  • Type of lifting equipment: band
  • Material strap: Nylon
  • Hook material: stainless steel 10mm, rubber transparent
  • Weight: approx. 11 kg
  • Winch dimensions (width x depth x high): 296.5 x 1122 x 172 mm
Lifting and hoisting tools / Electric hoist / Electric cable hoists Torso HCB0200S 8720028097715
€ 217.80 Incl. VAT https://schema.org/InStock
€ 217.80 217.8 EUR
Two post lift 4000kg 230V Classic [VL35F230B] Two post lift 4000kg 230V Classic
mm mm mm Kg

Two post lift / two colum lift

Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications.
The "Classic" model is a very and succesful and reliable model. Due to its simple but sturdy structure, the lift has no weak superfluous components and is extremely durable. Thanks to the new manual sync lock system, the lift can easily be unlocked on both sides with just one action.

Features:

  • double telescopic extendable lifting arms

  • sync lock system 

  • good quality hydraulic pump

  • in height adjustable lifting pads

  • automatic support arm locking

  • fully automatic electric detent

  • protective rubbers door stop

  • foot protection at every lifting arm

  • protective caps on the inside of the columns

  • robust columns manufactured from rolled steel

  • hydraulic cylinder on both sides

  • extreme low threshold of 45mm

  • dead mans switch for lifting and lowering

  • automatic protection against overcharge

  • height limit switch

  • 12 heavy M18 security bolts

Technical specifications:

  • capacity = 4000kg

  • voltage = 230V

  • motor power = 2,2kW

  • min. working height = 95mm

  • max. lifting height = 2000mm

  • reach short lifting arm = 600 - 870mm

  • reach long lifting arm = 840 - 1320mm

  • distance between the columns = 2815mm

  • height of the columns = 2850mm

  • weight = 610kg

  • oil capacity = 10L CH32 (not included!)

All of Falco's car lifts comply with the NEN-EN1493 safety standard and are supplied with a Dutch manual including maintenance protocol and CE certificate 2006/42/EC.

Lifts / Two post lifts Falco Sollevatori VL35F230B 8720028070442
€ 1,996.50 Incl. VAT https://schema.org/InStock
€ 1,996.50 1996.5 EUR
Airco diagnoses kit [MMR32410A] Airco diagnoses kit
mm mm mm Kg

Pressure gauge set / air conditioning diagnosis set / manifold set / 2-way pressure gauge set

This professional air conditioning diagnosis set from Fabbri is very complete and can be used for the most common automotive refrigerants, including R32 and R410.

The air conditioning diagnostic set comes standard including: 

  • 3 service hoses with a length of 1.75 meters each

  • High and Low pressure couplings for both R32 and R410

  • Storage handycase

Tools / Automotive / Air conditioning technology / Tools Fabbri MMR32410A 8720028101368
€ 108.90 Incl. VAT https://schema.org/InStock
€ 108.90 108.9 EUR
Thermometer infrared [DTM550] Thermometer infrared
mm mm mm Kg

Digital temperature meter infrared

The possibilities of this infrared thermometer are unlimited. The meter can be used for measuring temperatures of all kinds of different objects. Think of objects in the house, such as a refrigerator or freezer. But is also useful to measure parts of vehicles, in order to find out whether this part is possibly defect.

Characteristics:

  • measures from -50 ~ 550 degrees Celsius (-58 ~ 1022 degrees Fahrenheit)

  • 12:1 optical resolution

  • LCD display

  • background lighting

  • comfortable handle

  • low battery indication

  • laser pointer

  • measure in Fahrenheit and Celsius

  • response time = 500ms

  • material = ABS

  • battery type = 2x 1,5V AAA

Electrical and accessories / Test and measurement equipment Fluxon DTM550 8720028041541
€ 21.18 Incl. VAT https://schema.org/InStock
€ 21.18 21.18 EUR
Digital multimeter [DMM219] Digital multimeter
mm mm mm Kg

Multimeter digital

This Fluxon digital multimeter is suitable for many different measurement tasks. Due to the large display, the measured values are always clearly displayed.

Measure functions:

  • AC/DC voltage

  • AC/DC current

  • resistance

  • continuity

  • diode test

  • capacity

  • frequency

  • cycle of use

  • room temperature

  • NCV-test

Characteristics:

  • measurement category = CAT III - 1000V / CAT IV - 600V

  • 20A

  • LCD display with 19999 counts

  • automatic / manual range selection

  • material = ABS

  • update ratio = 3 times per second

  • true RMS

  • data hold

  • background light

  • low battery indication

  • auto power off

  • battery type = 2x 1,5V AAA

Specifications regarding measuring range, accuracy etc. are listed in a table in the supplied manual.

Comes standard with test leads.

Electrical and accessories / Test and measurement equipment Fluxon DMM219 8720028019168
€ 42.35 Incl. VAT https://schema.org/InStock
€ 42.35 42.35 EUR
Universal adapter Trainsway [SBM01UA] Universal adapter Trainsway
mm mm mm Kg

Universal flange adapter

This adapter makes a balancing machine suitable for clamping centreless wheels.

  • centering from 90 to 204mm

  • for 3, 4 and 5 bolt rims

  • shaft diameter = 40mm (and with the use of an adapter also 36mm)

Suitable for all Trainsway wheel balancers.

Shop equipment / tyre service / Tyre balancer accessories Trainsway SBM01UA 8720028060580
€ 199.65 Incl. VAT https://schema.org/InStock
€ 199.65 199.65 EUR
Cone set for big rims (Iveco) 40mm [SBM40CB] Cone set for big rims (Iveco) 40mm
mm mm mm Kg

Cone set

- suited for big rims (Iveco)
- for machines with 40mm axle
- 2 pieces

Shop equipment / tyre service / Tyre balancer accessories Trainsway SBM40CB 8720028073115
€ 102.85 Incl. VAT https://schema.org/InStock
€ 102.85 102.85000000000001 EUR
Cone set for big rims (Iveco) 36mm [SBM36CB] Cone set for big rims (Iveco) 36mm
mm mm mm Kg

Cone set

- suited for big rims (Iveco)
- inside ring diameter = 140mm

- for machines with 36mm axle
- 2 pieces

Shop equipment / tyre service / Tyre balancer accessories Trainsway SBM36CB 8720028073146
€ 102.85 Incl. VAT https://schema.org/InStock
€ 102.85 102.85000000000001 EUR
Self-centering motorcycle adaptor for balancing machine [SBM99MA] Self-centering motorcycle adaptor for balancing machine
mm mm mm Kg

Self-centering motorcycle adaptor

This adaptor fits on balancing machines with an axle of both 36mm and 40mm, using the centering ring.

  • shaft connection diameter = 36 and 40mm

  • connecting thread = 10mm

  • connection holes diameter = 6mm

  • distance between connection holes center tot center = 165mm

Shop equipment / tyre service / Tyre balancer accessories Trainsway SBM99MA 8720028060542
€ 223.85 Incl. VAT https://schema.org/InStock
€ 223.85 223.85 EUR
Cone set 40mm 4 pieces [SBM40CSET] Cone set 40mm 4 pieces
mm mm mm Kg

Cone set

-Max - Min cone size
-65mm - 45mm
-80mm - 55mm
-110m - 75mm
-135mm - 95mm

All adapters connect to 40mm axles.

Shop equipment / tyre service / Tyre balancer accessories Trainsway SBM40CSET 8720028073108
€ 102.85 Incl. VAT https://schema.org/InStock
€ 102.85 102.85000000000001 EUR
Tyre changer ZH626 [ZH626] Tyre changer ZH626
mm mm mm Kg

Car tyre changer

A tyre dis-mounting machine suiteable for car tyres as wel as motorcycle tyres. Thanks to it's stable swivel top arm it's
placeable against the wall.

Equipped with a mounting head for aluminum rims!

technical specification
- voltage = 230V
- frequency = 50Hz
- motor Power =  1.1Kw /1.5HP
- phase = 1
- bead breaker force = 2500Kg
- noise level = 75db
- pneumatic supply = 8 - 10bar
- rim clamping outside = 10'' - 21''
- rim clamping inside = 12'' - 24''
- max. wheel diameter =41''(1040mm)
- max. wheel height = 14'' (355mm)
- type = ZH626

These machines are CE approved

Various accessories available!

standart provided accessories :
beading lifting tool, air purifier, gun inflator, locking wedge protector, connector

Shop equipment / tyre service / Tyre changer / Trainsway Trainsway ZH626 8720028071999
€ 1,149.50 Incl. VAT https://schema.org/InStock
€ 1,149.50 1149.5 EUR
Flap disc V conical LSZ F3 115 x 22,23mm K60 [210480S] Flap disc V conical LSZ F3 115 x 22,23mm K60
mm mm mm Kg

Flap disc LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 115mm
- grain = K60
- bore = 22,23mm

Shop equipment / Handtools / Abrasives and grinding materials / Flap discs Rhodius 210480S
€ 2.54 Incl. VAT https://schema.org/InStock
€ 2.54 2.54 EUR
Cut-off wheel XT70 115 x 1,5 x 22,23mm 10 pieces [207878] Cut-off wheel XT70 115 x 1,5 x 22,23mm 10 pieces
mm mm mm Kg

Cut-off disc XT70

Reliable cutting disc for the cost-conscious professional.
Ideal for processing thin-walled as well as solid materials.
Suitable for low-power machines.

Advantages:
- little burr formation
- high cutting speed
- fewer sparks

Technical specifications:
- diameter = 115mm
- thickness = 1,5mm
- bore = 22,23mm
- 10 pieces

Shop equipment / Handtools / Abrasives and grinding materials / Cut-off discs Rhodius 207878 4011890064382
€ 12.10 Incl. VAT https://schema.org/InStock
€ 12.10 12.1 EUR
Cut-off wheel XTK70 180 x 1,5 x 22,23mm V42 [208121S] Cut-off wheel XTK70 180 x 1,5 x 22,23mm V42
mm mm mm Kg

Cut-off disc XTK70

Reliable cutting disc for the cost-conscious professional.
Ideal for processing thin-walled as well as solid materials.
Suitable for low-power machines.

Advantages:
- little burr formation
- high cutting speed
- fewer sparks

Technical specifications:
- diameter = 180mm
- thickness = 1,5mm
- bore = 22,23mm
- V42

Shop equipment / Handtools / Abrasives and grinding materials / Cut-off discs Rhodius 208121S
€ 1.88 Incl. VAT https://schema.org/InStock
€ 1.88 1.8800000000000001 EUR
Flap disc V conical LSZ F3 115 x 22,23mm K40 [210479S] Flap disc V conical LSZ F3 115 x 22,23mm K40
mm mm mm Kg

Flap disc LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 115mm
- grain = K40
- bore = 22,23mm

Shop equipment / Handtools / Abrasives and grinding materials / Flap discs Rhodius 210479S
€ 2.54 Incl. VAT https://schema.org/InStock
€ 2.54 2.54 EUR
Flap disc V conical LSZ F3 125 x 22,23mm K80 [210484S] Flap disc V conical LSZ F3 125 x 22,23mm K80
mm mm mm Kg

Flap disc LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 125mm
- grain = K80
- bore = 22,23mm

Shop equipment / Handtools / Abrasives and grinding materials / Flap discs Rhodius 210484S
€ 2.72 Incl. VAT https://schema.org/InStock
€ 2.72 2.72 EUR
Flap disc V conical LSZ F3 115 x 22,23mm K80 [210481S] Flap disc V conical LSZ F3 115 x 22,23mm K80
mm mm mm Kg

Flap disc LSZ F3

An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding.

Advantages:
- good stock removal performance
- proven quality with cotton backing
- high service life

Technical specifications:
- diameter = 115mm
- grain = K80
- bore = 22,23mm

Shop equipment / Handtools / Abrasives and grinding materials / Flap discs Rhodius 210481S
€ 2.54 Incl. VAT https://schema.org/InStock
€ 2.54 2.54 EUR