Back in stockOne of our goals is to have everything directly available from our stock, however sometimes a product might be temporarily sold out. On this page, you can find all items, which are back in our stock.
One of our goals is to have everything directly available from our stock, however sometimes a product might be temporarily sold out. On this page, you can find all items, which are back in our stock.
Motorcycle lift clamp
Suitable for the motorcycle lift table ML75HAS.
max. opening = 205mm
lifting pad set / Tesla point pad / jack lift pad protecting battery / jack pad lift adapterThe Jack Pad from Falco Sollevatori is used for lifting a Tesla model 3, S, Y & X and is suitable for garage jacks and car lifts.The jack pad set protects the car battery or chassis from damage and can provide perfect protection.The jack point pad is made of durable black rubber. Sturdy and durable, securely fits into lifting points of the car.The connection design solves the problem that the adapter is easy to fall out of the lifting point. There is a rubber ring on the top of each jack pad to keep the adapter in the hole when it is inserted.Include a set of 4 lifting pads.Specifications:
Digital oil control valve Rubber protection to absorb shock prolonged lifetime Dispenses in liter, gallon, pint and quart 5-digit easy to read LCD display powered by 3V battery Low battery indicator equipped.
inlet = 1/2'' female
flow rate = 1 - 35L/min
pressure range = 0-5,50 Bar
viscosity = 8 - 5000mPas
battery = 1 *3V CR2
temperature = max. 60 degrees Celcius
Welding wire SG2 MIG steel This INE SG2 MIG welding wire is suitable for unalloyed steels and fine grain steels. It is a steel MIG welding wire in accordance with AWS SG2 E70S-6. This wire is used for welding machinery, vehicles, bridges, tanks and in shipbuilding. - brand = INE - thickness = 1,0mm - D300 - SG2 - suitable for = steel - CO2 M21 - weight = 15kg Chemical analysis: C 0.07 Si 0.80 Mn 1.40 Standards: AWS A 5.18 / ASME SFA 5.18: E70S-6 AWS A 5.18M / ASME SFA 5.18M: E48S-6 EN ISO 14341-A: G 46 4 M21 3Si1 EN ISO 14341-A: G 42 2 C1 3Si1 Certificates: TÜV - DB - ABS - DNV - RINA - GL - LRS *Certificates are available on request
Hydraulic hollow cylinder This type plunger prevents blocking, caused by slight unbalanced loading of the piston. Dust ring prevents dust from entering the cylinder. The step-limited piston prevents over-travel. The wear ring increases the lifetime of the cylinder.
Multimeter digital
This basic model Fluxon digital multimeter is suitable for different measurement tasks and because of its compact design easy to carry.
Measure functions:
AC/DC voltage
resistance
continuity
diodes
capacitance
frequency
duty cycle
Characteristics:
measurement category = CAT II - 600V
LCD display with 4000 counts
automatic / manual range selection
material = ABS
update ratio = 3 times per second
true RMS
data hold
low battery indication
auto power off
battery type = 2x 1,5V AAA
Specifications regarding measuring range, accuracy etc. are listed in a table in the supplied manual.
Comes standard with test leads.
Air impact wrench 1'' Ideal for high volume repair works on trucks, tires and heavy equipments. The removable side handle provides excellent control. - square drive = 1" - capacity = 45mm - free speed = 3,200rpm - power = 3500Nm (2580ft-lbs) - air inlet = 1/2" - air hose = 1/2" - avg. air consumption = 23 CFM / 650 L/min - working pressure = 6,3 bar - pinless
Air compressor silent This Zion Air silent compressor has got a PKZ safety switch, copper wiring for better durability and star delta. - power = 4kw / 5,5pk - voltage = 400V - air flow = 400lpm - pressure = 12,5bar - noise level = 85dBa @ 7m 2 year warrenty Spare parts such as seal kits and filters are seperately available.
Carbide cutter
This Rhodius carbide burr is suitable for stainless steel, steel and cast iron material. The optimally coordinated cutting geometry ensures the best results.
Can be used on straight grinders and pneumatic grinders.
Technical specifications:
shape = C cylindrical with ball-nose
thickness = WRC, DIN shape for tungsten carbide burrs
diameter milling part = 12,7mm
diameter shaft part = 6mm
length of milling part = 25mm
total length = 70mm
Abrasive speedblast garnet Garnet is a recyclable and universally applicable abrasive. It is used especially for removing rust, paint and mill scale and for facade cleaning. Specifications: - grit size = 30 - 60 (0,2 - 0,6mm) - grit shape = angular - packed in a 25kg bag
Wrapping film This black wrapping film is suitable for packing valuable products unrecognizable. The wrapping film provides a stable pallet loading and is easy to handle by hand or with a dispenser. - color = black - 20my x 50cm x 300mtr
Synthetic rope Increasingly, the steel cable of winches is replaced by synthetic rope. This improves break strength, safety and ease of use. Because steel cable reaches a point where it permanently deforms, it has to be replaced sooner. With synthetic rope, this is much less the case, because the energy in the rope is converted into head and not in elasticity. - diameter = 6,5mm - length = 12m - pulling strength = 3800kg Suitable for electric winches CW05V12 and CW05V24.
Portable air compressor 12V - 12V- air flow rate = 71L/min @ 0 bar - max. power consumption = 30amp - permanent magnet motor - tank capacity = 5,7ltr - max. working pressure = 105psi / 7bar - duty cycle = 33% - max. surrounding temp. = 70 degrees Celcius - min. surrounding temp. -70 degrees Celcius - automatic shut off valve Including tyre gun, couplers, hose and filters
The Press jaw M42 from Fluxon, for pressing with stainless steel and copper pipes. This press jaw is made from hardened steel, ensuring durability and long-lasting performance.
The Press jaw TH16 from Fluxon, for pressing with multilayer pipe. This press jaw is made from hardened steel, ensuring durability and long-lasting performance.
The Press jaw M22 from Fluxon, for pressing with stainless steel and copper pipes. This press jaw is made from hardened steel, ensuring durability and long-lasting performance.
The Press jaw U16 from Fluxon, for pressing with pex and multilayer pipe. This press jaw is designed to fit on high end brands and is made from hardened steel, ensuring durability and long-lasting performance.
This powerful Cable cutter tool Body 120kN from Fluxon can effortlessly cut threw a diverse range of material including single Cu and Al core cables, light weight armored Cu and Al cables.The tool has a closed cutting head with interlockable bolt for added safety.
This body is supplied in a sturdy storage case which has the space to add battery's and chargers and complete the kit.This body is supplied in a sturdy storage case which has the space to add batteries and chargers and complete the kit.With its OLED display and one-button operation, you can easily control and monitor the tool's performance. The swivel head rotates 350°, allowing you to use the cable cutter in any direction with ease. The automatic retracting feature ensures quick and effortless retraction of the tool. And with its built-in LED light, you can work in low-light conditions without any hassle.The unit is filled with oil type CH15 so It can operate in an ambient temperature range of -10~40°C, making it suitable for a wide range of working environments.Set contains:- 1x Cable cutter tool- 1x O-ring set- 1x Handle- 1x Shoulder strap- 1x Sturdy storage case.
The Press jaw U32 from Fluxon, for pressing with pex and multilayer pipe. This press jaw is made from hardened steel, ensuring durability and long-lasting performance.
The Press jaw U25 from Fluxon, for pressing with pex and multilayer pipe. This press jaw is made from hardened steel, ensuring durability and long-lasting performance.
