Two pole lift / spindle lift / car lift
Cascos car lifts are from 100% European production. Cascos has more than 50 years of experience in vehicle lifts, which results in a very reliable and extremely strong end product.At Cascos lifts, three key words are central, namely: Reliability, functionality and safety.
The robust construction of the lifts and the high quality of the components ensure high reliabilty and low maintenance costs.The double and triple long arms ensure that both symmetrical and asymmetrical work can be performed and ensures a very comfortable and fast positioning of the arms in the picking points, without taking a long time to perfectly center a vehicle.The robust columns, the steel bearings, but especially the safety nuts ensure a very high safety.
Furthermore, the Cascos two pole lifts have a number of very thoughtful features:
SlenderTec solid columns: Very robust, 10 to 23mm thick.
Extendable symmetrical arms: Lifts have been developed to withstand the maximum load at any angle and all lengths.
Large spindle diameter: 45mm, the largest spindle on the market. Provides less friction and therefore less wear on the working nut. Less lubrication is required.
Steel bearings: Less wear and compared to nylon systems because they last longer. They also provide support for the columns.
Safety nuts: Extra sturdy for lifts with a capacity up to 5500kg.
Thanks to the hight capacity of 4 tons, the design without base and the large reach of the lifting arms, this Cascos lift is indispensible in every professional garage or workshop. The lift is very versatile and suitable for almost every vehicle.
This lift has the following thoughtful features:
ILC-system (Intelligent Lift Control): An innovative control system that controls the operation of the lift and can display the following on the LCD screen: safety warnings, useful information about the operation of the lift, operational reports, maintenance reports and troubleshooting.
Electrical synchronization with electronic board and detectors: The electronic board is programmable and protected against voltage changes, and short circuits. In addition, this system enables quick and easy identification of the operating status of the lift and ables ILC system operating.
Independent motors in each column.
Level is controlled through 4 inductive sensors that ensure absolute synchronisation of the lift, so it is less sensitive to floor leveling and cable balancing, making it easy to work with very long vehicles.
It is possible to connect both the motor through inground installation and work without arch for the same price. Ask one of our employees for the possibilities.
Floorless: provides optimum working space between the columns.
Both symmetrical and asymmetrical arms: 4 arms that extend 3 times.
Double screw spindles for extra high picking.
capacity = 4000kg
voltage = 400V / 3-fase
motor power = 3 + 3kW
minimum height = 100mm
maximum height = 1970mm
lifting time = 45 seconds
distance between the columns = 2700mm
height of the columns = 2435mm
total height = 4250mm
range of triple arms = 668 - 1341mm
total weight = 750kg
Note: The price for this lift does not include the delivery and placement of the lift. For more information regarding installation and service contracts you can contact one of our employees.
This Comfort model without base has a capacity of 3,2 tons and has the following features:
Both symmetrical and asymmetrical arms: 2 arms that extend 2 times and 2 arms that extend 3 times.
capacity = 3200kg
motor power = 2,2 2,2kW
maximum height = 1960mm
range of double arms = 710 - 1050mm
range of triple arms = 597 - 1122mm
total weight = 600kg
This Comfort model lift with base has a capacity of 3,2 tons and has the following features:
Single motor: 3-phase, 400V
Stable, sturdy floor plate.
motor power = 3,7kW
Suitable for the post lifts VL35F230, VL35F230B and VL35F400.
Two post lift / two colum lift
Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications. The "Classic" model is a very and succesful and reliable model. Due to its simple but sturdy structure, the lift has no weak superfluous components and is extremely durable. Thanks to the new manual sync lock system, the lift can easily be unlocked on both sides with just one action.
double telescopic extendable lifting arms
sync lock system
good quality hydraulic pump
in height adjustable lifting pads
automatic support arm locking
fully automatic electric detent
protective rubbers door stop
foot protection at every lifting arm
protective caps on the inside of the columns
robust columns manufactured from rolled steel
hydraulic cylinder on both sides
extreme low threshold of 45mm
dead mans switch for lifting and lowering
automatic protection against overcharge
height limit switch
12 heavy M18 security bolts
voltage = 230V
motor power = 2,2kW
min. working height = 95mm
max. lifting height = 2000mm
reach short lifting arm = 600 - 870mm
reach long lifting arm = 840 - 1320mm
distance between the columns = 2815mm
height of the columns = 2850mm
weight = 610kg
oil capacity = 10L CH32 (not included!)
All of Falco's car lifts comply with the NEN-EN1493 safety standard and are supplied with a Dutch manual including maintenance protocol and CE certificate 2006/42/EC.
No time for installation?
Our professional installation team is specialized in the installation of Falco lifts!
Your bridge will be installed in a correct way.
The team thinks along with you about the position and placement of the lift.
For the above price is our installation team within a radius of 100km on site including 3 hours of labor for installation.
For the extended activities which are not included, there will be a hourly rate of 75,00 excl. VAT. For distances beyond the radius of 100km, we will charge 1,00 euro per kilometer.
The surface must at least meet the following requirements:
- concrete strength C20 - C25 250kg/com
- 200mm thickness
- newly poured concrete needs to cure for 28 days
Ask for the manual for more information about the surface requirements.
Transport of the lift is not included and depends on the unloading facilities.
Consult us first to make a suitable appointment for this.
Zwei Säulen Hebebühne
Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications.The "Premium" fully automatic model is a very complete and reliable model, making the lift suitable for a large number of vehicles.
double and triple telescopic extendable lifting arms
steel cable synchronization control
quality hydraulic pump incl. cooling fins
clear oil reservoir incl, oil level
foot protection incl. acoustic security signal
turns off when the highest position is reached
in height adjustable lifting pads with double spindles
dead man's switch for lifting and lowering
voltage = 400V
max. lifting height = 2050mm
reach short lifting arm = 630 - 930mm
reach long lifting arm = 830 - 1760mm
height of the columns = 2806mm
Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications.
The "Premium" fully automatic model is a very complete and reliable model, making the lift suitable for a large number of vehicles.Features:
min. working height = 100mm
max. lifting height = 1850mm
reach short lifting arm = 620 - 890mm
reach long lifting arm = 790 - 1570mm
Two column lift bridge / two pile bridge / 2 column lift bridge
Thanks to the well thought-out design of the Falco bridges, you save time and effort. The focus is on ease of use and an efficient work flow. The different models are developed for various applications. The PremiumPlus is a fully automatic and barrier-free model, which makes this bridge very complete and suitable for a large number of different vehicles. The Falco Sollevatori Premium series has proven itself over the years as a very reliable and multi-usable bridge, for almost all common cars.
Floorless / barrier-free
Double and triple telescopic adjustable wishbones
Steel cable synchronization control (synchronization)
Quality hydraulic pump incl. cooling fins
24V control box
Transparent oil reservoir incl. oil level
Foot protection incl. acoustic safety signal
Exit when reaching highest position
Height adjustable carrying pads with double spindles
Standard elevated pickup buses
Automatic wishbone lock
Fully automatic electric detent
Shield inside column
Robust columns made of rolled steel
Protective rubbers door stop
Hydraulic cylinder on both sides
Dead mans operation when lifting and lowering
Automatic overload protection
Height Limit Switch
12 heavy M18 locking bolts
motor power = 2.2kW
minimum recording height = 95mm
maximum lifting height = 2050mm
short lift arms reach = 625 - 932mm
reach long lift arms = 825 - 1750mm
distance between the columns = 2785mm
total height = 3756mm
total width = 3540mm
weight = 680kg
All Falco car bridges comply with the NEN-EN1493 safety standard and are supplied with a Dutch manual including maintenance protocol and CE certificate 2006/42/EG.
Thanks to the well thought-out design of the Falco bridges, you save time and effort. The focus is on ease of use and an efficient work flow. The different models are developed for various applications. The Titan fully automatic model has a large range, is a very complete and reliable model, making the lift suitable for large vehicles in particular.
Large triple telescopic adjustable wishbones
Protective cap inside column
Fixing kit floor mounting
Set of 70mm height adapters (4 pieces)
capacity = 5000kg
minimum recording height = 105mm
maximum lifting height = 1900mm
reach short lift arms = 800 - 1500mm
reach long lift arms = 1000 - 1950mm
distance between the columns = 3342mm
height of the columns = 2880mm
total width = 4136mm
weight = 1000kg
oil capacity = 10L CH32 (not included)
Two pole lift / spindle lift / car lift / EVA / electric vehicle adapter
Available soon: Two post spindle lift EVA (Electric Vehicle Adapter) incl. wheel adapters & rubber lifting pad. This two-column spindle 2 in 1 lift bridge has a very large pick-up range and can lift electric, hybrid and fuel vehicles. Thanks to the interchangeable lifting arms, the EVA system can be used, which lifts via the tires, so no additional adapters are needed for lifting electric vehicles.
motor power = 3.3 kW
min. intake height = 100mm
max. lifting height = 1970mm
weight = 750kg