Tire bead retainer
- facilitates wheel mounting on rim
- material = fiberglass
Brake cylinder honing device This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others. Suited for cylinders with a diameter of 58 to 168mm.
Universal puller set
This very extensive universal puller set is suitable for disassembling crankshaft pulleys and crankshaft dampers, among other things. The set is also suitable for the power steering and dynamo pulley. The puller is suitable for pulling with 2 or 3 bolts and the flange is provided with bolt slots.
Content:
1x puller flange with 4 holes
1x small centering adapter
1x large centering adapter
1x flat shaft adapter
3x 35mm bolts, M10 x 1,5mm
3x 45mm bolts, M8 x 1,25mm
2x 65mm bolts, M8 x 1,25mm
2x 90mm bolts, M8 x 1,25mm
3x 1-1/2" bolts, 3/8", 24 thread
3x 2" bolts, 3/8", 16 thread
5x 3" bolts, 3/8", 16 thread
2x 4-1/2" bolts, 3/8", 16 thread
2x 6" bolts, 5/16", 18 thread
3x 3-1/2" bolts, 5/16", 18 thread
2x 2-1/2" bolts, 1/4", 28 thread
11x flat rings
Ball joint extractor set
This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.This set comes in a handy plastic transport case.
1x steering fork 17mm opening
1x steering fork 24mm opening
1x steering fork 28mm opening
handle for manual use 200mm long
adapter for pneumatic use 180mm long
Plastic locking nut assortment
- 30x nut clip for Mitsubishi
- 20x nut clip for Toyota
- 30x nut clip for Toyota and Nissan
- 40x nut clip for Mazda and Nissan
- 25x screw grommet for Mitsubishi
- 40x screw nut for Ford
- 40x headlight nut for Volkswagen and GM
- 20x screw grommet for Toyota
- 25x connecting clip for Mercedes
- 25x screw clip for Renault
- 25x screw grommet for Fiat
Chain oil filter wrench / crescent chain wrench Suitable for pipes with a diameter of 70 tot 120mm. The wrench has a length of 400mm and is easy to adjsut and click to 500 and 600mm.
Exhaust pipe expander kit
This set is suitable for expanding or to re-round the exhaust pipe.
3 expanders:
28 to 44mm
38 to 63mm
54 to 88mm
Oil filter caps / oil filter cap set / oil filter disassembly set
This set is suitable for mounting and dismounting almost any oil filter from a large number of types of cars and motorcycles.Caps with 14, 15, 30 and 36P are suitable for all filters from 65mm to 100mm.\
drive = 3/8"
adaptor 1/2" to 3/8"
Sizes caps:
65mm 14P = Toyota / Nissan
65 / 67mm 14P = Ford / Mazda
68mm 14P = Mazda / Ford / Subaru
73mm 14P = Toyota / Audi / Rover / Lexus / Austin
74 / 76mm 15P = VW / Audi / GM / Mercedes / Opel
75 / 77mm 15P = Fiat / Renault
76mm 14P = Motorcraft / Ford
76mm 30P = Fiat / Lancia
80mm 15P = Mazda / Subaru / Toyota / Honda / Nissan
80 / 82mm 15P = Volvo
90mm 15P = Fiat
93mm 15P = Nissan / VW / Porsche / Renault / Honda / Audi
93mm 36P = Ford / Motorcraft
100mm 15P = Isuzu / Mitsubishi
Bearing race and seal driver set / seal mounting set
This set is suitable for assembling shafts, bearings and seals without damaging the housing of the shaft. The flanges are made of sturdy aluminum and go up to 81mm. This makes the set suitable for almost all standard wheel bearings. The flat side of the flange is used for the seals and the other side for installing the seal rings. The handle has a ribbed area for extra grip.
1x handle
9x aluminum flange = 39,5 / 44,5 / 50 / 59 / 63 / 65 / 72 / 76 and 81mm
drive = 14mm
Valve spring plier / valve spring lifter
This heavy duty valve spring compressor is suitable for both old-fashioned and modern cylinder heads with deep-set valves. The valve spring plier is also suitable for larger cylinder heads due to the large lever and robust construction. The valve wedge cam be converted, making the valve spring compressor also suitable for smaller cylinder heads.
clamping range = 35 - 200mm
2 adapters with 25 and 30mm diameter
suitable for +/- 95% of the cars
suitable for both gasoline and diesel engines
Universal caliper wind back kit
This set is suitable for turning and pushing back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.Suitable for almost any car brand.
1 spindle right thread
1 spindle left thread
2 positioning plates
17 adapter plates
Coil spring compressor set manual
This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.
max. working range = 265mm
Brake line flare set
This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.
pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm
pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
pipe cutter
spreader
TU-114 Fuel pressure gauge for gasoline engines
This set is suitable for testing the fuel pressure of almost all injection systems, also suitable for injection systems with a Schrader test port.The pressure gauge is clearly legible, has 2 scales, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 410mm.The set consists of a number of adapters and fittings, components which are equipped with a quick coupling and a pressure relief valve. The pressure relief valve is equipped with a drain hose for the safe draining of fuel.
Inner bearing puller set / impact puller set
This bearing puller set is suitable for disassembling inner bearings. Even the most stuck bearings can be removed with the help of the slide hammer.
1x slide hammer of 940 grams and 380mm long
1x internal extractor 12 - 14mm
1x internal extractor 14 - 19mm
1x internal extractor 18 - 25mm
1x internal extractor 25 - 32mm
Screw thread reparation set / oil drain repair kit
Ideal for repairing of severely damaged screw thread of carter plugs.
This set is suitable for the following car brands: Audi, BMW, Citroën, Mercedes-Benz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugoet, Porsche, Renault, Saab, Seat, Skoda, Toyota, Volvo and VW.
- 4x thread taps = M13 x 1,5 - M15 x 1,5 - M17 x 1,5 - M20 x 1,5
- 5x carter plug M13 x 1,5 10 sealing rings
- 5x carter plug M15 x 1,5 10 sealing rings
- 5x carter plug M17 x 1,5 10 sealing rings
- 5x carter plug M20 x 1,5 10 sealing rings
Nut bolt and stud extractor set
This set is suitable for removing nuts, bolts and stuck studs.
5 bolt removers for left side thread = M3-M6, M6-M8, M8-M11, M11-M14 and M14-M18
4 stud sockets 1/2" drive = 6, 8, 10 and 12mm
9 spiral sockets for 6pt nuts 3/8" drive = 10, 11, 12, 13, 14, 15, 16, 17 and 19mm
material = chrone molybdenum steel