Categories
  1. Products
  2. Welding and cutting equipment
  3. Welding wire
Sort By: Featured

Welding wire MIG steel D300 SG2 0,8mm [INEFIL08D15] Welding wire MIG steel D300 SG2 0,8mm
mm mm mm Kg

Welding wire SG2 MIG steel

This INE SG2 MIG welding wire is suitable for unalloyed steels and fine grain steels. It is a steel MIG welding wire in accordance with AWS SG2 E70S-6.
This wire is used for welding machinery, vehicles, bridges, tanks and in shipbuilding.

- brand = INE
- thickness = 0,8mm
- D300
- SG2
- suitable for = steel
- CO2 M21
- weight = 15kg

Chemical analysis:
C 0.07
Si 0.80
Mn 1.40

Standards:
AWS A 5.18 / ASME SFA 5.18: E70S-6
AWS A 5.18M / ASME SFA 5.18M: E48S-6
EN ISO 14341-A: G 46 4 M21 3Si1
EN ISO 14341-A: G 42 2 C1 3Si1

Certificates:
TÜV - DB - ABS - DNV - RINA - GL - LRS

*Certificates are available on request

 Welding and cutting equipment / Welding wire I.N.E. INEFIL08D15 8024499208459
€ 74.42 Incl. VAT https://schema.org/SoldOut
€ 74.42 74.42 EUR
Welding wire MIG stainless steel D200 0,8mm 5kg [INEFILINOX08K5] Welding wire MIG stainless steel D200 0,8mm 5kg
mm mm mm Kg

Welding wire MIG

This INE 316 stainless steel welding wire is suitable for connecting equal and unequally types of stainless steel. It is a stainless steel MIG welding wire in accordance with AWS E316L-Si. This welding wire is suitable for applications where a high degree of corrosion resistance is desired.

- brand = INE
- thickness = 0,8mm
- D200
- type = 316LSi
- suitable for = stainless steel
- weight = 5kg

Standards:
AWS A.5.9: ER 316L-Si
EN ISO 14343-A: G 19 12 3 LSi

 Welding and cutting equipment / Welding wire I.N.E. INEFILINOX08K5 8024499901169
€ 151.25 Incl. VAT https://schema.org/InStock
€ 151.25 151.25 EUR
Welding wire MIG steel fluxcore D200 0,9mm 4,5kg [INETUB09D45] Welding wire MIG steel fluxcore D200 0,9mm 4,5kg
mm mm mm Kg

Welding wire MIG

This INE gasless MIG welding wire is suitable for welding steel to 5,0mm thickness. It is a gasless MIG steel welding wire in accordance with AWS E71T-GS. The welding wire is filled with flux powder, which is burned during welding. This results in shielding gas, which makes the use of gas no longer necessary and you can weld without gas bottle everywhere.

- brand = INE
- thickness = 0,9mm
- D200
- type = BA71TGS
- suitable for = steel
- weight = 4,5kg

Standards:
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15

 Welding and cutting equipment / Welding wire I.N.E. INETUB09D45 8720028045723
€ 88.94 Incl. VAT https://schema.org/InStock
€ 88.94 88.94 EUR
Welding wire MIG steel fluxcore D100 0,9mm 0,9kg [INETUB09D09] Welding wire MIG steel fluxcore D100 0,9mm 0,9kg
mm mm mm Kg

Welding wire MIG

This INE gasless MIG welding wire is suitable for welding steel to 5,0mm thickness. It is a gasless MIG steel welding wire in accordance with AWS E71T-GS. The welding wire is filled with flux powder, which is burned during welding. This results in shielding gas, which makes the use of gas no longer necessary and you can weld without gas bottle everywhere.

- brand = INE
- thickness = 0,9mm
- D100
- type = BA71TGS
- suitable for = steel
- weight = 0,9kg

Standards:
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15

 Welding and cutting equipment / Welding wire I.N.E. INETUB09D09 8024499260402
€ 18.15 Incl. VAT https://schema.org/InStock
€ 18.15 18.150000000000002 EUR
Welding wire MIG steel fluxcore D200 0,8mm 4,5kg [INETUB08D45] Welding wire MIG steel fluxcore D200 0,8mm 4,5kg
mm mm mm Kg

Welding wire MIG

This INE gasless MIG welding wire is suitable for welding steel to 5,0mm thickness. It is a gasless MIG steel welding wire in accordance with AWS E71T-GS. The welding wire is filled with flux powder, which is burned during welding. This results in shielding gas, which makes the use of gas no longer necessary and you can weld without gas bottle everywhere.

- brand = INE
- thickness = 0,8mm
- D200
- type = BA71TGS
- suitable for = steel
- weight = 4,5kg

Standards:
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15

 Welding and cutting equipment / Welding wire I.N.E. INETUB08D45 8024499260259
€ 90.75 Incl. VAT https://schema.org/InStock
€ 90.75 90.75 EUR
Welding wire MIG steel fluxcore D100 0,8mm 0,9kg [INETUB08D09] Welding wire MIG steel fluxcore D100 0,8mm 0,9kg
mm mm mm Kg

Welding wire MIG

This INE gasless MIG welding wire is suitable for welding steel to 5,0mm thickness. It is a gasless MIG steel welding wire in accordance with AWS E71T-GS. The welding wire is filled with flux powder, which is burned during welding. This results in shielding gas, which makes the use of gas no longer necessary and you can weld without gas bottle everywhere.

- brand = INE
- thickness = 0,8mm
- D100
- type = BA71TGS
- suitable for = steel
- weight = 0,9kg

Standards:
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15

 Welding and cutting equipment / Welding wire I.N.E. INETUB08D09 8024499260150
€ 19.97 Incl. VAT https://schema.org/InStock
€ 19.97 19.97 EUR
Welding wire MIG stainless steel D100 0,8mm 1kg [INEFILINOX08K1] Welding wire MIG stainless steel D100 0,8mm 1kg
mm mm mm Kg

Welding wire MIG

This INE 316 stainless steel welding wire is suitable for connecting equal and unequally types of stainless steel. It is a stainless steel MIG welding wire in accordance with AWS E316L-Si. This welding wire is suitable for applications where a high degree of corrosion resistance is desired.

- brand = INE
- thickness = 0,8mm
- D100
- type = 316LSi
- suitable for = stainless steel
- weight = 1kg

Standards:
AWS A.5.9: ER 316L-Si
EN ISO 14343-A: G 19 12 3 LSi

 Welding and cutting equipment / Welding wire I.N.E. INEFILINOX08K1 8024499901145
€ 18.15 Incl. VAT https://schema.org/SoldOut
€ 18.15 18.150000000000002 EUR
Welding wire MIG alu D300 1,0mm 6kg [INEFILALU10D6] Welding wire MIG alu D300 1,0mm 6kg
mm mm mm Kg Welding wire MIG

This INE ALU welding wire is suitable for MIG / MAG welding of almost all types of aluminum. It is a MIG welding wire ALU according AWS ER5356. This welding wire is used for welding of magnesium alloy types of aluminum with up to 5% magnesium.

- brand = INE
- thickness = 1,0mm
- D300
- type = AL5%MG5356
- suitable for = aluminum
- weight = 6kg

Standards:
AWS A 5.10: ER5356
EN ISO 18273: S Al 5356
EN ISO 18273: S AlMg5Cr (A)
EN ISO 14175: L1 Welding and cutting equipment / Welding wire I.N.E. INEFILALU10D6 8024499902111
€ 139.15 Incl. VAT https://schema.org/InStock
€ 139.15 139.15 EUR
Welding wire MIG alu D200 1,0mm 2kg [INEFILALU10D2] Welding wire MIG alu D200 1,0mm 2kg
mm mm mm Kg

Welding wire MIG

This INE ALU welding wire is suitable for MIG / MAG welding of almost all types of aluminum. It is a MIG welding wire ALU according AWS ER5356. This welding wire is used for welding of magnesium alloy types of aluminum with up to 5% magnesium.

- brand = INE

- thickness = 1,0mm

- D200

- type = AL5%MG5356

- suitable for = aluminum

- weight = 2kg

Standards:

AWS A 5.10: ER5356

EN ISO 18273: S Al 5356

EN ISO 18273: S AlMg5Cr (A)

EN ISO 14175: L1

 Welding and cutting equipment / Welding wire I.N.E. INEFILALU10D2 8024499900612
€ 70.79 Incl. VAT https://schema.org/InStock
€ 70.79 70.79 EUR
Welding wire MIG alu D100 1,0mm 0,5kg [INEFILALU10D05] Welding wire MIG alu D100 1,0mm 0,5kg
mm mm mm Kg Welding wire MIG

This INE ALU welding wire is suitable for MIG / MAG welding of almost all types of aluminum. It is a MIG welding wire ALU according AWS ER5356. This welding wire is used for welding of magnesium alloy types of aluminum with up to 5% magnesium.

- brand = INE
- thickness = 1,0mm
- D100
- type = AL5%MG5356
- suitable for = aluminum
- weight = 0,5kg

Standards:
AWS A 5.10: ER5356
EN ISO 18273: S Al 5356
EN ISO 18273: S AlMg5Cr (A)
EN ISO 14175: L1 Welding and cutting equipment / Welding wire I.N.E. INEFILALU10D05 8024499900605
€ 19.97 Incl. VAT https://schema.org/InStock
€ 19.97 19.97 EUR
Welding wire MIG alu D200 0,8mm 2kg [INEFILALU08D2] Welding wire MIG alu D200 0,8mm 2kg
mm mm mm Kg

Welding wire MIG

This INE ALU welding wire is suitable for MIG / MAG welding of almost all types of aluminum. It is a MIG welding wire ALU according AWS ER5356. This welding wire is used for welding of magnesium alloy types of aluminum with up to 5% magnesium.

- brand = INE
- thickness = 0,8mm
- D200
- type = AL5%MG5356
- suitable for = aluminum
- weight = 2kg

Standards:
AWS A 5.10: ER5356
EN ISO 18273: S Al 5356
EN ISO 18273: S AlMg5Cr (A)
EN ISO 14175: L1

 Welding and cutting equipment / Welding wire I.N.E. INEFILALU08D2 8024499900582
€ 70.79 Incl. VAT https://schema.org/InStock
€ 70.79 70.79 EUR
Welding wire MIG alu D100 0,8mm 0,5kg [INEFILALU08D05] Welding wire MIG alu D100 0,8mm 0,5kg
mm mm mm Kg

Welding wire MIG

This INE ALU welding wire is suitable for MIG / MAG welding of almost all types of aluminum. It is a MIG welding wire ALU according AWS ER5356. This welding wire is used for welding of magnesium alloy types of aluminum with up to 5% magnesium.

- brand = INE
- thickness = 0,8mm
- D100
- type = AL5%MG5356
- suitable for = aluminum
- weight = 0,5kg

Standards:
AWS A 5.10: ER5356
EN ISO 18273: S Al 5356
EN ISO 18273: S AlMg5Cr (A)
EN ISO 14175: L1

 Welding and cutting equipment / Welding wire I.N.E. INEFILALU08D05 8024499900551
€ 19.97 Incl. VAT https://schema.org/InStock
€ 19.97 19.97 EUR
Welding wire MIG steel D300 SG2 1,2mm 15kg [INEFIL12D15] Welding wire MIG steel D300 SG2 1,2mm 15kg
mm mm mm Kg

Welding wire SG2 MIG steel

This INE SG2 MIG welding wire is suitable for unalloyed steels and fine grain steels. It is a steel MIG welding wire in accordance with AWS SG2 E70S-6.
This wire is used for welding machinery, vehicles, bridges, tanks and in shipbuilding.

- brand = INE
- thickness = 1,2mm
- D300
- SG2
- suitable for = steel
- CO2 M21
- weight = 15kg

Chemical analysis:
C 0.07
Si 0.80
Mn 1.40

Standards:
AWS A 5.18 / ASME SFA 5.18: E70S-6
AWS A 5.18M / ASME SFA 5.18M: E48S-6
EN ISO 14341-A: G 46 4 M21 3Si1
EN ISO 14341-A: G 42 2 C1 3Si1

Certificates:
TÜV - DB - ABS - DNV - RINA - GL - LRS

*Certificates are available on request

 Welding and cutting equipment / Welding wire I.N.E. INEFIL12D15 8024499210803
€ 72.00 Incl. VAT https://schema.org/InStock
€ 72.00 72.0 EUR
Welding wire MIG steel D200 SG2 1,0mm 5kg [INEFIL10D5] Welding wire MIG steel D200 SG2 1,0mm 5kg
mm mm mm Kg

Welding wire SG2 MIG steel

This INE SG2 MIG welding wire is suitable for unalloyed steels and fine grain steels. It is a steel MIG welding wire in accordance with AWS SG2 E70S-6.
This wire is used for welding machinery, vehicles, bridges, tanks and in shipbuilding.

- brand = INE
- thickness = 1,0mm
- D200
- SG2
- suitable for = steel
- CO2 M21
- weight = 5kg

Chemical analysis:
C 0.07
Si 0.80
Mn 1.40

Standards:
AWS A 5.18 / ASME SFA 5.18: E70S-6
AWS A 5.18M / ASME SFA 5.18M: E48S-6
EN ISO 14341-A: G 46 4 M21 3Si1
EN ISO 14341-A: G 42 2 C1 3Si1

Certificates:
TÜV - DB - ABS - DNV - RINA - GL - LRS

*Certificates are available on request

 Welding and cutting equipment / Welding wire I.N.E. INEFIL10D5 8024499204703
€ 33.28 Incl. VAT https://schema.org/InStock
€ 33.28 33.28 EUR
Welding wire MIG steel D200 SG2 0,6mm 5kg [INEFIL06D5] Welding wire MIG steel D200 SG2 0,6mm 5kg
mm mm mm Kg

Welding wire SG2 MIG steel

This INE SG2 MIG welding wire is suitable for unalloyed steels and fine grain steels. It is a steel MIG welding wire in accordance with AWS SG2 E70S-6.
This wire is used for welding machinery, vehicles, bridges, tanks and in shipbuilding.

- brand = INE
- thickness = 0,6mm
- D200
- SG2
- suitable for = steel
- CO2 M21
- weight = 5kg

Chemical analysis:
C 0.07
Si 0.80
Mn 1.40

Standards:
AWS A 5.18 / ASME SFA 5.18: E70S-6
AWS A 5.18M / ASME SFA 5.18M: E48S-6
EN ISO 14341-A: G 46 4 M21 3Si1
EN ISO 14341-A: G 42 2 C1 3Si1

Certificates:
TÜV - DB - ABS - DNV - RINA - GL - LRS

*Certificates are available on request

 Welding and cutting equipment / Welding wire I.N.E. INEFIL06D5 8024499202204
€ 39.33 Incl. VAT https://schema.org/InStock
€ 39.33 39.33 EUR
Welding wire MIG steel D300 SG2 1,0mm 15kg [INEFIL10D15] Welding wire MIG steel D300 SG2 1,0mm 15kg
mm mm mm Kg

Welding wire SG2 MIG steel

This INE SG2 MIG welding wire is suitable for unalloyed steels and fine grain steels. It is a steel MIG welding wire in accordance with AWS SG2 E70S-6.
This wire is used for welding machinery, vehicles, bridges, tanks and in shipbuilding.

- brand = INE
- thickness = 1,0mm
- D300
- SG2
- suitable for = steel
- CO2 M21
- weight = 15kg

Chemical analysis:
C 0.07
Si 0.80
Mn 1.40

Standards:
AWS A 5.18 / ASME SFA 5.18: E70S-6
AWS A 5.18M / ASME SFA 5.18M: E48S-6
EN ISO 14341-A: G 46 4 M21 3Si1
EN ISO 14341-A: G 42 2 C1 3Si1

Certificates:
TÜV - DB - ABS - DNV - RINA - GL - LRS

*Certificates are available on request

 Welding and cutting equipment / Welding wire I.N.E. INEFIL10D15 8024499204802
€ 72.00 Incl. VAT https://schema.org/SoldOut
€ 72.00 72.0 EUR
Welding wire MIG steel D200 SG2 0,8mm 5kg [INEFIL08D5] Welding wire MIG steel D200 SG2 0,8mm 5kg
mm mm mm Kg

Welding wire SG2 MIG steel

This INE SG2 MIG welding wire is suitable for unalloyed steels and fine grain steels. It is a steel MIG welding wire in accordance with AWS SG2 E70S-6.
This wire is used for welding machinery, vehicles, bridges, tanks and in shipbuilding.

- brand = INE
- thickness = 0,8mm
- D200
- SG2
- suitable for = steel
- CO2 M21
- weight = 5kg

Chemical analysis:
C 0.07
Si 0.80
Mn 1.40

Standards:
AWS A 5.18 / ASME SFA 5.18: E70S-6
AWS A 5.18M / ASME SFA 5.18M: E48S-6
EN ISO 14341-A: G 46 4 M21 3Si1
EN ISO 14341-A: G 42 2 C1 3Si1

Certificates:
TÜV - DB - ABS - DNV - RINA - GL - LRS

*Certificates are available on request

 Welding and cutting equipment / Welding wire I.N.E. INEFIL08D5 8024499202952
€ 30.25 Incl. VAT https://schema.org/InStock
€ 30.25 30.25 EUR