The Mammuth heated high pressure parts washer is suitable for cleaning dirty parts in garages, workshops and maintenance environments. Heating the cleaning solution to 50 °C helps loosen oil, grease and stubborn dirt. Temperature settings can be easily adjusted using the digital display.
A cleaning gun directs the liquid onto dirty parts. Afterwards, compressed air can be used to blow the parts dry, without the need for a separate blow gun.
The tank is filled with 8 to 14 litres of cleaning solution. During use, LED lighting provides additional illumination inside the high pressure parts washing cabinet.
Please note: This parts washer is only suitable for use with water based cleaning agents. Do not use traditional solvent based cold degreasers.
For optimal cleaning performance and safe use, we recommend Magic cleaning agent.
- Heated cleaning up to 50 °C
Warm cleaning solution helps loosen oil, grease and stubborn dirt more quickly.
- Combined compressed air and cleaning
Parts can be blown dry with compressed air immediately after cleaning.
- Tank 8–14 litres
Suitable for use with 8 to 14 litres of cleaning solution.
- Digital thermostat
Temperature can be easily set and read on the digital display.
- LED lighting
Specifications
| Power supply | 230V |
| Working air pressure | 4.8 - 8.3 Bar |
| Cleaning fluid fill volume | 8–14 L |
| Cleaning fluid circulation | 0.8 L/min |
| Air consumption | 142 L/min |
| Afmetingen werkruimte (L × B × H) | 737 × 559 × 452 mm |
Product Dimensions
| Length | 790 mm |
|---|---|
| Width | 610 mm |
| Height | 1,710 mm |
| Weight | 49.5 kg |
Package Dimensions
| Length | 790 mm |
|---|---|
| Width | 610 mm |
| Height | 820 mm |
| Weight | 51.00 kg |