Brake line flare set

This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.

Content:

• pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm

• pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"

• pipe cutter

• spreader

TU-114 Fuel pressure gauge for gasoline engines

This set is suitable for testing the fuel pressure of almost all injection systems, also suitable for injection systems with a Schrader test port.
The pressure gauge is clearly legible, has 2 scales, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 410mm.
The set consists of a number of adapters and fittings, components which are equipped with a quick coupling and a pressure relief valve. The pressure relief valve is equipped with a drain hose for the safe draining of fuel.

Bearing race and seal driver set / seal mounting set

This set is suitable for assembling shafts, bearings and seals without damaging the housing of the shaft. The flanges are made of sturdy aluminum and go up to 81mm. This makes the set suitable for almost all standard wheel bearings. The flat side of the flange is used for the seals and the other side for installing the seal rings. The handle has a ribbed area for extra grip.

Content:

• 1x handle

• 9x aluminum flange = 39,5 / 44,5 / 50 / 59 / 63 / 65 / 72 / 76 and 81mm

• drive = 14mm
  

Valve spring plier / valve spring lifter

This heavy duty valve spring compressor is suitable for both old-fashioned and modern cylinder heads with deep-set valves. The valve spring plier is also suitable for larger cylinder heads due to the large lever and robust construction. The valve wedge cam be converted, making the valve spring compressor also suitable for smaller cylinder heads.

• clamping range = 35 - 200mm

• 2 adapters with 25 and 30mm diameter

• suitable for +/- 95% of the cars

• suitable for both gasoline and diesel engines

Universal caliper wind back kit

This set is suitable for turning and pushing  back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.
Suitable for almost any car brand.

Content:

• 1 spindle right thread

• 1 spindle left thread

• 2 positioning plates

• 17 adapter plates

Coil spring compressor set manual

This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.

• max. working range = 265mm

Exhaust pipe expander kit

This set is suitable for expanding or to re-round the exhaust pipe.

3 expanders:

• 28 to 44mm

• 38 to 63mm

• 54 to 88mm

Oil filter caps / oil filter cap set / oil filter disassembly set

This set is suitable for mounting and dismounting almost any oil filter from a large number of types of cars and motorcycles.
Caps with 14, 15, 30 and 36P are suitable for all filters from 65mm to 100mm.\

• drive = 3/8"

• adaptor 1/2" to 3/8"

Sizes caps:

• 65mm 14P = Toyota / Nissan

• 65 / 67mm 14P = Ford / Mazda

• 68mm 14P = Mazda / Ford / Subaru

• 73mm 14P = Toyota / Audi / Rover / Lexus / Austin

• 74 / 76mm 15P = VW / Audi / GM / Mercedes / Opel

• 75 / 77mm 15P = Fiat / Renault

• 76mm 14P = Motorcraft / Ford

• 76mm 30P = Fiat / Lancia

• 80mm 15P = Mazda / Subaru / Toyota / Honda / Nissan

• 80 / 82mm 15P = Volvo

• 90mm 15P = Fiat

• 93mm 15P = Nissan / VW / Porsche / Renault / Honda / Audi

• 93mm 36P = Ford / Motorcraft

• 100mm 15P = Isuzu / Mitsubishi
  

Chain oil filter wrench / crescent chain wrench

Suitable for pipes with a diameter of 70 tot 120mm. The wrench has a length of 400mm and is easy to adjsut and click to 500 and 600mm.

Plastic locking nut assortment

Content:

- 30x nut clip for Mitsubishi

- 20x nut clip for Toyota

- 30x nut clip for Toyota and Nissan

- 40x nut clip for Mazda and Nissan

- 25x screw grommet for Mitsubishi

- 40x screw nut for Ford

- 30x nut clip for Toyota and Nissan

- 40x headlight nut for Volkswagen and GM

- 20x screw grommet for Toyota

- 25x connecting clip for Mercedes

- 25x screw clip for Renault

- 25x screw grommet for Fiat

Universal puller set

This very extensive universal puller set is suitable for disassembling crankshaft pulleys and crankshaft dampers, among other things. The set is also suitable for the power steering and dynamo pulley. The puller is suitable for pulling with 2 or 3 bolts and the flange is provided with bolt slots.

Content:

• 1x puller flange with 4 holes

• 1x small centering adapter

• 1x large centering adapter

• 1x flat shaft adapter

• 3x 35mm bolts, M10 x 1,5mm

• 3x 45mm bolts, M8 x 1,25mm

• 2x 65mm bolts, M8 x 1,25mm

• 2x 90mm bolts, M8 x 1,25mm

• 3x 1-1/2" bolts, 3/8", 24 thread

• 3x 2" bolts, 3/8", 16 thread

• 5x 3" bolts, 3/8", 16 thread

• 2x 4-1/2" bolts, 3/8", 16 thread

• 2x 6" bolts, 5/16", 18 thread

• 3x 3-1/2" bolts, 5/16", 18 thread

• 2x 2-1/2" bolts, 1/4", 28 thread

• 11x flat rings

Ball joint extractor set

This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.
This set comes in a handy plastic transport case.

Content:

• 1x steering fork 17mm opening

• 1x steering fork 24mm opening

• 1x steering fork 28mm opening

• handle for manual use 200mm long

• adapter for pneumatic use 180mm long

Brake cylinder honing device

This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others.
Suited for cylinders with a diameter of 58 to 168mm.

Valve lapping tool attachment

- facilitates the insertion of valves
- automatic change in direction
- for use with fine grinding paste
- with 8mm shank
- min. working speed = 1000rpm
- max. working speed = 1250rpm
- 4 suction plates = 20, 30, 35 and 45mm
- 8mm shaft for attaching the suction cups

Tire bead retainer

- facilitates wheel mounting on rim

- material = fiberglass

Exhaust pipe compressor

Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.

Clutch aligning set

This universal centering set is suitable for very accurate and simple centering of the clutch plate on vehicles with top bearing.

Content:

• 1x centering mandrel with screw thread

• 8x adapter in sizes: 11 x 18mm, 12 x 18mm, 15 x 18mm, 17 x 18mm, 19 x 18mm, 20 x 18mm, 21 x 18mm, 25 x 18mm

• 1x conical adapter for larger sizes

car plastic rivets / rivet kit auto/ fastener forming clip tool set / car door trims / car trim body clips kit / universal automotive retainers / bumper retainer clips / fasteners push retainer kit / auto push pin rivets set / door trim panel fender clips / car panel interior clips / door panel clips
Universal automotive retainer push clips kit from XPTools are widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, door trims, engine cover and splash shield retainers replacement. These body clips can also be used on cars, trucks, motorcycles, buses, caravans, etc.
625 pcs automotive clips and fasteners include 16 kinds of the most common sizes with holes ranging from 5mm to 10mm.
All fasteners push retainers packed in a compact size plastic container for easy organization and storage or carrying in the car. Compact size, convenient to store or carry within your car.
The kit includes a special removal tool, which will help you remove old clips and easily access hard-to-reach places.
This push type retainer set is made of high quality plastic material with solid construction to strengthen the fixation and effectively improve accuracy. 
Technical specifications:

• Qty: 625 automotive fastener clips
• Applicable: models universal
• Material: PA (polyamide)
• Colour: black

Total 16 different si zes auto clips:

• 30pcs (10 mm) hole size head diameter: 20mm, stem length: 13mm;
• 90pcs (6.25 mm) hole size head diameter: 15.2mm, stem length: 11mm;
• 90pcs (6 mm) hole size head diameter: 15.2mm, stem length: 12mm;
• 70pcs (7 mm) hole size head diameter: 13.8mm, stem length: 11.4mm;
• 25pcs (8 mm) hole size head diameter: 16mm, stem length: 10mm;
• 25pcs (9 mm) hole size head diameter: 15mm, stem length: 12mm;
• 30pcs (6 mm) hole size head diameter: 15mm, stem length: 13.7mm;
• 50pcs (6.2 mm) hole size head diameter: 13.8mm, stem length: 10mm;
• 20pcs (9 mm) hole size head diameter: 18.2mm, stem length: 16mm;
• 50pcs (5 mm) hole size head diameter: 18.2mm, stem length: 12mm;
• 20pcs (7 mm) hole size head diameter: 20mm, stem length: 10.5mm;
• 30pcs (8 mm) hole size head diameter: 19mm, stem length: 8.5mm;
• 25pcs (8 mm) hole size head diameter: 20mm, stem length: 13mm;
• 20pcs (7.8 mm) hole size head diameter: 20mm, stem length: 10mm;
• 30pcs (9 mm) hole size head diameter: 19.7mm, stem length: 8.7mm;
• 20pcs (9 mm) hole size head diameter: 17.7mm, stem length: 27.6mm.

Widely Used:
Fender Liner Retainer, Reinforced Panel Retainer, Retainer, Bumper Cover Retainer, Side Shield Retainer, Pkg Tray Trim Pin, Cowl Grille Rivet, Flare Retainer, Cowl Top Panel Rivet, Air Deflector Pin, Trunk Trim Fastener, Air Seal Clip, Shield Pin, Wheelhouse Liner Retainer, Rear Trim Panel Retainer, Air Shield Retainer, Carpet Trim Retainer, Lower Quarter Trim Retainer.
Pkg Tray Trim Retainer, Splash Shield Retainer, Wheelhouse Trim Retainer, Bumper Cover Nut, Side AirBag Retainer,Bumper Cover Retainer Clip, Closure Panel Retainer, Floor Duct Retainer, Header Panel Retainer, Latch Assembly Retainer, Trim Panel Clip, Lid Trim Retainer, Molding Retainer, Seal Retainer, Air Duct Pin, Splash Shield Rivet, Carpet Retainer, Servo Retainer, Silencer Retainer, Wheelhouse Cover Retainer, Front Trim Retainer, Rear Trim Retainer, Side Cover Retainer, Insulator Retainer, Center Panel Retainer, Tail Panel Trim Fastener, Closure Panel Pin, Licence Bracket Pin.

Brake line flare set

This flaring set is suitable for double and single flares of copper, aluminum and mild steel brake lines and brass tubes up to 45 degrees.

Content:

• 5 adapters in the sizes = 3/16", 1/4", 5/16", 3/8" and 1/2" (4.8, 6.4, 7.9,9.5 and 12.7mm)

• pipe holder

• spreader