Ausdreh Satz für Muttern Bolzen und Schrauben
This set is suitable for removing nuts, bolts and stuck studs.
Content:
5 bolt removers for left side thread = M3-M6, M6-M8, M8-M11, M11-M14 and M14-M18
4 stud sockets 1/2" drive = 6, 8, 10 and 12mm
9 spiral sockets for 6pt nuts 3/8" drive = 10, 11, 12, 13, 14, 15, 16, 17 and 19mm
material = chrone molybdenum steel
Auspuff Federspanner Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.
Auspuffgummi Haken This hook set is used for applying or removing exhaust rubbers. - 1 curved hook - 1 flat hook 90 degrees
Auspuffrohr Aufweitungs Satz
This set is suitable for expanding or to re-round the exhaust pipe.
3 expanders:
28 to 44mm
38 to 63mm
54 to 88mm
Bördelgerät Satz 5
This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.
pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm
pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
pipe cutter
spreader
Bremskolbenrückstellsatz
This set is suitable for turning and pushing back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.Suitable for almost any car brand.
1 spindle right thread
1 spindle left thread
2 positioning plates
17 adapter plates
Doppelt Leitung Bördelgerät Satz / Bremsleitung Fackelsatz
This flaring set is suitable for double and single flares of copper, aluminum and mild steel brake lines and brass tubes up to 45 degrees.
5 adapters in the sizes = 3/16", 1/4", 5/16", 3/8" and 1/2" (4.8, 6.4, 7.9,9.5 and 12.7mm)
pipe holder
Drehwinkelmesser / Winkelmesser / Winkelmesser Schlüssel
This torque angle gauge is suitable for retightening of cylinder head bolts, among other things, under a certain number of degrees after tightening at a set moment.The protractor wrench can be used with a torque wrench, ratchet or socket wrench. The scale is clearly legible.Fixed with the clamping screw and adjustable locking pin.
1/2" internal and external
360 degrees, series in 2 degrees
Drehwinkel-Messgerät zum Winkelanzug
- for operation in combination with torque wrenches, ratchets, sockets and accessories
- to accurately set the degrees of turn required on certain applications
- drive = 1/2"
- diameter = 90mm
- 0 - 360 degrees, sequences in 2 degrees
Bearing race and seal driver set / seal mounting set
This set is suitable for assembling shafts, bearings and seals without damaging the housing of the shaft. The flanges are made of sturdy aluminum and go up to 81mm. This makes the set suitable for almost all standard wheel bearings. The flat side of the flange is used for the seals and the other side for installing the seal rings. The handle has a ribbed area for extra grip.
1x handle
9x aluminum flange = 39,5 / 44,5 / 50 / 59 / 63 / 65 / 72 / 76 and 81mm
drive = 14mm
Coil spring compressor set manual
This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.
max. working range = 265mm
Gleithammer Satz
This slide hammer set is suitable for internal and external pulling with 2 or 3 legs, as a thru axle puller, wheel hub puller, brake drum puller and sheet metal puller.
slide hammer with shaft
internal puller with 2 and 3 legs
external puller with 2 and 3 legs
locking plier adapter
lip puller
dent puller
hub puller
Glühkerzen Demontage Satz / Reparatursatz für Glühkerzen
This set is suitable for removing damaged or hard to reach glow plugs from the cylinder head and repairing damaged threads. Suitable for glow plugs with either an M8 x 1.0 thread or and M10 x 1.0 thread. The expanded set has everything to remove the damaged glow plug without damaging the cylinder head.The set is specially designed for clearing and cleaning the glow plug bore and sealing seat. Any unwanted carbon can also be removed from the borehole.
1x puller for stuck glow plugs
2x step drill = 7 x 5.5mm and 9 x 5.5mm
2x HSS drill = 3.5mm
3x thread tap = M8 x 1.0 / M10 x 1.0 / 6.3 (1/4") - 28UNF
1x T-handle with ratchet function
1x E10 torx socket
1x drill adapter
1x power bolt
1x power nut
1x Allen key
2x centering socket for drill 3.5mm
Bremszylinder Honwerkzeug This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others. Suited for cylinders with a diameter of 24 to 63,5mm.
Bremszylinder Honwerkzeug This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others. Suited for cylinders with a diameter of 58 to 168mm.
Innen Kugellager Abzieher Satz
This bearing puller set is suitable for disassembling inner bearings. Even the most stuck bearings can be removed with the help of the slide hammer.
1x slide hammer of 940 grams and 380mm long
1x internal extractor 12 - 14mm
1x internal extractor 14 - 19mm
1x internal extractor 18 - 25mm
1x internal extractor 25 - 32mm
Innen und Außen Abzieher Satz
This internal and external puller set is suitable for disassembling oil seals and ball bearings, for example. This set comes in a handy plastic transport case.
1x small internal puller 15-30mm
1x large internal puller 30-80mm
1x external puller 15-80mm
1x locking nut
1x slidehammer