Metallbandsäge / Bandsägemaschine

Diese Cowley Bandsäge eignet sich sehr gut für den Einsatz in Technik und Industrie. Die Bandsägemaschine ist im Schnittwinkel von 0° bis 45° verstellbar, hat eine hohe Sägepräzision und die Schnittgeschwindigkeit ist von 40-80m/min regelbar. Die Sägeblattspannung lässt sich einfach am Manometer ablesen. Die direkte Kühlung mit Kühlmittel auf dem Sägeblatt sorgt für eine lange Einschaltdauer, wäscht Späne weg und hält das Sägeblatt geschmiert. Die Bandsäge ist ideal zum Trennen von Rohren und Profilen aus Stahl, Edelstahl und Aluminium.

Eigenschaften:

• Benutzerfreundliche Frontplatte
• Drehzahlpotentiometer
• Bi-Metall-Sägeblatt mit Sicherheitsschalter
• Manometer für Sägeblatt
• Schneller Sägeblattwechsel
• Einfache hydraulische Spannungseinstellung
• Eingebautes Kühlsystem mit einstellbarer Durchflussregelung
• Der hydraulische Dämpfer steuert die Geschwindigkeit des Sägeblattabfalls
• Der Endschalter schaltet die Stromversorgung ab, sobald der Schnitt abgeschlossen ist
• Kühlpumpe

Technische Spezifikationen:

• Spannung = 400 V/ 50 Hz 3-phasig
• Leistung = 0,75 kW
• Bandsägegeschwindigkeit = 40-80m/min
• Höhe Arbeitstisch = 870 mm
• Klingengeschwindigkeiten = 2
• Klingenabmessungen = 2080 x 20 x 0,9 mm
• Gewicht = 150 kg
  

Metallbandsäge / Bandsägemaschine

Band saw machine from Cowley has a solid metal base, with an integrated control panel in the frontside of the frame.

The user-friendly low-voltage control panel including emergency switch, makes it very easy and safe to operate. Additionally it has an adjustable automatic hydraulic feed which makes it possible to set and adjust the lowering feed speed and make controlled cuts automatically.

Thanks to the adjustable sevenfold bearing saw blade guidance it has a high cutting precision, and the low speed of the motor ensures a longer life.

Euro type horizontal bandsaw is adjustable in cutting angle and has a high sawing precision.

The machine has 2 fixed cutting speeds 45 and 90 m/min.

The chips that are formed during the sawing process can remain in the cavities between the teeth and interfere with normal cutting, so the machine is equipped stainless steel circular abrasive brush for band saw blades allow to gently and effectively clean between the teeth of the saw blade without dulling the cutting edge of the blade.

Cast iron body provides a high stability and less vibration during cutting. Using the handwheel, the saw blade is hydraulically tightened and the tightening force can be read on the pressure gauge. This professional Band saw machine is recommended for working with metals. This low-noise model is suitable for sawing pipes and profiles of alu, steel and stainless steel.

The band saw is equipped with a built-in flow-controlled cooling system with coolant and electric pump, due to this the cooling of the saw blade ensures a long working cycle and cutting precision.

Band saw equipped with an adjustable material clamp with dual lock quick system in front of the frame.

Сutting angle level lock is integrated into the cabinet. The band saw has an adjustable cutting angle from 0° - 60° and is equipped with an adjustable material stop for fast and correct cutting.

Electric motor with reducer and ISO certified, electrical installations in accordance with CE standards.

This model comes with a small set of maintenance tools.

Features:

• User-friendly control panel on the front
• Automatic / hydraulic down feed with saw blade system
• Adjustable 7 bearing sawblade guidance
• Emergency stop
• Automatic switch off after cutting
• Quick clamping system
• Bi-metal saw blade
• Cast iron machine clamp
• Saw blade pressure gauge
• Maintenance-free bearings
• Built-in cooling pump
• Adjustable material stop
• Blade tension adjustment
• Adjustable cutting angle 0° - 60°

Technical specifications:

• Voltage = 400V/ 50Hz 3-phase
• Power = 1.1kW
• Band saw speed = 45 / 90 m/min
• Working table height = 850mm
• Blade Speeds = 2
• Weight = 185kg
  

Blade dimensions:

• Band saw length = 2480mm
• Band saw width = 27mm
• Band saw thickness = 0.9mm

Adjustable cutting angle 0° to 60° using a quick locking handle, and an automatic turn-off system.

Cutting capacity:

• 0 ° round 225 mm
• 0 ° square 190 mm
• 0 ° rectangular 150 × 245 mm
• 45 ° round 145 mm
• 45 ° square 145 mm
• 45 ° rectangular 190 x 150 mm
• 60 ° round 90 mm
• 60 ° square 90 mm
• 60° rectangular 115 x 90 mm

Metallbandsäge / Bandsägemaschine

This Cowley band saw machine has a solid metal base, with an integrated control panel in the frontside of the frame.

The machine is equipped with a more secure user-friendly low-voltage control panel including an emergency switch, making it very easy and safe to operate. Additionally it has an adjustable automatic hydraulic feed which makes it possible to set and adjust the lowering feed speed and make controlled cuts automatically.

Thanks to the adjustable Double bearing saw blade guidance it has a high cutting precision, and the low speed of the motor ensures a longer life.

Euro type horizontal bandsaw is adjustable in cutting angle and has a high sawing precision.

The machine has 2 fixed cutting speeds 35 and 70 m/min.

The cast iron machine clamp has a quick vise clamping system that allows you to move in different directions: from side to side, as well as back and forth. You can adjust the clamping angle and then fix at the angle you need. The vise is strengthened and expanded to increase clamping force to keep the workpiece more stable during machining.

The chips that are formed during the sawing process can remain in the cavities between the teeth and interfere with normal cutting, so the machine is equipped stainless steel circular abrasive brush for band saw blades allow to gently and effectively clean between the teeth of the saw blade without dulling the cutting edge of the blade.

Cast iron body provides a high stability and less vibration during cutting. Using the handwheel, the saw blade is hydraulically tightened and the tightening force can be read on the pressure gauge. This professional Band saw machine is recommended for working with metals. This low-noise model is suitable for sawing pipes and profiles of alu, steel and stainless steel.

The band saw is equipped with a built-in flow-controlled cooling system with coolant and electric pump, due to this the cooling of the saw blade ensures a long working cycle and cutting precision.

Band saw equipped with an adjustable material clamp with dual lock quick system.

Сutting angle level lock is integrated into the cabinet. The band saw has an adjustable cutting angle from 0° to -45° and is equipped with an adjustable material stop for fast and correct cutting.

Electric motor with reducer and ISO certified, electrical installations in accordance with CE standards.

This model comes with a small set of maintenance tools.

Features:

• User-friendly control panel on the front
• Automatic / hydraulic down feed with saw blade system
• Adjustable double bearing sawblade guidance
• Emergency stop
• Automatic switch off after cutting
• Quick clamping system
• Bi-metal saw blade
• Cast iron machine clamp
• Saw blade pressure gauge
• Maintenance-free bearings
• Built-in cooling pump
• Adjustable material stop
• Blade tension adjustment
• Adjustable cutting angle -45° - +60

Technical specifications:

• Voltage = 400V/ 50Hz 3-phase
• Power = 2.2kW
• Band saw speed = 35 - 70 m/min
• Working table height = 890mm
• Blade Speeds = 2
• Weight = 522kg
  

Blade dimensions:

• Band saw length = 3770mm
• Band saw width = 34mm
• Band saw thickness = 1.1mm

Adjustable cutting angle -45° - +60 using a quick locking handle, and an automatic turn-off system

Cutting capacity:

• -45 ° round 290 mm
• -45 ° square 250 mm
• -45 ° rectangular 250 x 250 mm
• 0 ° round 355 mm
• 0 ° square 280 mm
• 0 ° rectangular 280 × 490 mm
• 45 ° round 355 mm
• 45 ° square 280 mm
• 45 ° rectangular 280 x 340 mm
• 60 ° round 230 mm
• 60 ° square 180 mm
• 60° rectangular 230 x 220 mm

bandsaw
This bimetallic band saw from Cowley consists of an alloyed refined steel strip on which a strip of high-alloy HSS cobalt-molybdenum steel is welded by using electrodes.
Here, the teeth are machined, after which the saw is hardened to 67 - 69 HRC.
The band saw is used in ferrous and non-ferrous materials, each bimetal quality has its own specific application.
M42 bimetal band saw:
Due to the high hardness of the edges, 67 - 69 HRC, longer service life can be achieved and higher cutting speeds can be used. Among others used for stainless steel and materials with a tensile strength up to 1400 N /mm².
Technical specifications:

• Width x thickness = 13 x 0.95mm
• 10/14 M42
  

bandsaw
This bimetallic band saw from Cowley consists of an alloyed refined steel strip on which a strip of high-alloy HSS cobalt-molybdenum steel is welded by using electrodes.
Here, the teeth are machined, after which the saw is hardened to 67 - 69 HRC.
The band saw is used in ferrous and non-ferrous materials, each bimetal quality has its own specific application.
M42 bimetal band saw:
Due to the high hardness of the edges, 67 - 69 HRC, longer service life can be achieved and higher cutting speeds can be used. Among others used for stainless steel and materials with a tensile strength up to 1400 N /mm².
Technical specifications:

• Width x thickness = 13 x 0.95mm
• 5/18 M42

bandsaw
This bimetallic band saw from Cowley consists of an alloyed refined steel strip on which a strip of high-alloy HSS cobalt-molybdenum steel is welded by using electrodes.
Here, the teeth are machined, after which the saw is hardened to 67 - 69 HRC.
The band saw is used in ferrous and non-ferrous materials, each bimetal quality has its own specific application.
M42 bimetal band saw:
Due to the high hardness of the edges, 67 - 69 HRC, longer service life can be achieved and higher cutting speeds can be used. Among others used for stainless steel and materials with a tensile strength up to 1400 N /mm².
Technical specifications:

• Width x thickness = 13 x 0.9mm
• 10/14 M42

bandsaw
This bimetallic band saw from Cowley consists of an alloyed refined steel strip on which a strip of high-alloy HSS cobalt-molybdenum steel is welded by using electrodes.
Here, the teeth are machined, after which the saw is hardened to 67 - 69 HRC.
The band saw is used in ferrous and non-ferrous materials, each bimetal quality has its own specific application.
M42 bimetal band saw:
Due to the high hardness of the edges, 67 - 69 HRC, longer service life can be achieved and higher cutting speeds can be used. Among others used for stainless steel and materials with a tensile strength up to 1400 N /mm².
Technical specifications:

• Width x thickness = 13 x 0.9mm
• 5/8 M42
  

bandsaw
This bimetallic band saw from Cowley consists of an alloyed refined steel strip on which a strip of high-alloy HSS cobalt-molybdenum steel is welded by using electrodes.
Here, the teeth are machined, after which the saw is hardened to 67 - 69 HRC.
The band saw is used in ferrous and non-ferrous materials, each bimetal quality has its own specific application.
M42 bimetal band saw:
Due to the high hardness of the edges, 67 - 69 HRC, longer service life can be achieved and higher cutting speeds can be used. Among others used for stainless steel and materials with a tensile strength up to 1400 N /mm².
Technical specifications:

• Width x thickness = 27 x 0.9mm
• 10/14 M42

bandsaw
This bimetallic band saw from Cowley consists of an alloyed refined steel strip on which a strip of high-alloy HSS cobalt-molybdenum steel is welded by using electrodes.
Here, the teeth are machined, after which the saw is hardened to 67 - 69 HRC.
The band saw is used in ferrous and non-ferrous materials, each bimetal quality has its own specific application.
M42 bimetal band saw:
Due to the high hardness of the edges, 67 - 69 HRC, longer service life can be achieved and higher cutting speeds can be used. Among others used for stainless steel and materials with a tensile strength up to 1400 N /mm².
Technical specifications:

• Width x thickness = 27 x 0.9mm
• 5/8 M42

bandsaw
This bimetallic band saw from Cowley consists of an alloyed refined steel strip on which a strip of high-alloy HSS cobalt-molybdenum steel is welded by using electrodes.
Here, the teeth are machined, after which the saw is hardened to 67 - 69 HRC.
The band saw is used in ferrous and non-ferrous materials, each bimetal quality has its own specific application.
M42 bimetal band saw:
Due to the high hardness of the edges, 67 - 69 HRC, longer service life can be achieved and higher cutting speeds can be used. Among others used for stainless steel and materials with a tensile strength up to 1400 N /mm².
Technical specifications:

• Width x thickness = 34 x 1.1mm
• 6/10 M42

bandsaw
This bimetallic band saw from Cowley consists of an alloyed refined steel strip on which a strip of high-alloy HSS cobalt-molybdenum steel is welded by using electrodes.
Here, the teeth are machined, after which the saw is hardened to 67 - 69 HRC.
The band saw is used in ferrous and non-ferrous materials, each bimetal quality has its own specific application.
M42 bimetal band saw:
Due to the high hardness of the edges, 67 - 69 HRC, longer service life can be achieved and higher cutting speeds can be used. Among others used for stainless steel and materials with a tensile strength up to 1400 N /mm².
Technical specifications:

• Width x thickness = 34 x 1.1mm
• 6/10 M42

Position Accessory for Cowley tapping machines.
Direct positioner 90°, GT12.
With this positioning tool you can easily place the tapping arm straight above the hole. By placing this positioning adapter on the workpiece you will set a perfect 90° angle for thread cutting.
Connection size GT12.

Zubehör für Gewindeschneidmaschinen
This die holder is suitable for thread sizes ranging from M12 to M14 to accommodate for a range of applications.
Ideal for threading various materials such as steel.
Fine external threading die holder made from HSS steel.
Features:

• high quality and durable
• manufactured from HSS steel offering reliability and corrosion resistance
• size dies M12 - M14
• diecast die holder
• ISO standard
• connection GT12

Zubehör für Gewindeschneidmaschinen
Ideal for threading external thread on various materials such as steel.
External threading die holder made from HSS steel.
Features:

• high quality and durable
• manufactured from HSS steel offering reliability and corrosion resistance
• size dies M10
• diecast die holder
• ISO standard
• connection GT12

Zubehör für Gewindeschneidmaschinen
Ideal for threading various materials such as steel.
External Threading Die Holder made from high speed steel.

 Features:

• high quality and durable
• manufactured from high speed steel offering reliability and corrosion resistance
• size dies M10
• diecast die holder
• ISO standard
• connection GT24

Zubehör für Gewindeschneidmaschinen
This die holder is suitable for thread sizes ranging from M12 to M14 to accommodate for a range of applications.
Ideal for threading various materials such as steel.
Fine external threading die holder made from HSS steel.
Features:

• high quality and durable
• manufactured from HSS steel offering reliability and corrosion resistance
• size dies M12 - M14
• diecast die holder
• ISO standard
• connection GT12

Tapping machine drilling chuck
This Cowley drilling chuck is made of high quality material, has good clamping strength and can maintain a long service life.
Thanks to the GT24 connection it’s easy to install the drilling chuck on a tapping machine, drilling machines, milling machines, electric tools, pneumatic tools and other equipment with reversible spindles and GT24 connection.
Drilling range : 3 - 16mm.

Position Accessory for Cowley tapping machines.
Direct positioner 90°, GT24.
With this positioning tool you can easily place the tapping arm straight above the hole. By placing this positioning adapter on the workpiece you will set a perfect 90° angle for thread cutting.

Connection size GT24.

Zubehör für Gewindeschneidmaschinen
This die holder is suitable for fine thread sizes ranging from M12 to M14 to accommodate for a range of applications. Ideal for threading various materials such as steel.
Fine external threading die holder made from HSS steel.
Features:

• high quality and durable
• manufactured from HSS steel offering reliability and corrosion resistance
• size dies M12 - M14
• diecast die holder
• ISO standard
• connection GT24

Zubehör für Gewindeschneidmaschinen
This die holder is suitable for fine thread sizes ranging from M16 to M20 to accommodate for a range of applications. Ideal for threading various materials such as steel.
Fine external threading die holder made from HSS steel.
Features:

• high quality and durable
• manufactured from HSS steel offering reliability and corrosion resistance
• size dies M16 - M20
• diecast die holder
• ISO standard
• connection GT24