Ausdreh Satz für Muttern Bolzen und Schrauben
This set is suitable for removing nuts, bolts and stuck studs.
Content:
5 bolt removers for left side thread = M3-M6, M6-M8, M8-M11, M11-M14 and M14-M18
4 stud sockets 1/2" drive = 6, 8, 10 and 12mm
9 spiral sockets for 6pt nuts 3/8" drive = 10, 11, 12, 13, 14, 15, 16, 17 and 19mm
material = chrone molybdenum steel
Auspuff Federspanner Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.
Auspuffgummi Haken This hook set is used for applying or removing exhaust rubbers. - 1 curved hook - 1 flat hook 90 degrees
Auspuffrohr Aufweitungs Satz
This set is suitable for expanding or to re-round the exhaust pipe.
3 expanders:
28 to 44mm
38 to 63mm
54 to 88mm
This XPTools tape measure is provided with a marker. This marks on paper, wood, metal, glass, slate, copper, marble, drywall and plastic.The tape measure has a belt clip, lock and an automatic return.
measuring range = 8 meters
width of tape = 22mm
Bandschlüssel - mit kräftigem Band 500mm - Chrome Vanadium Stahl
Becherhalter
This cup holder can be mounted on the side of 2 different types of tool stools and on the shelves of a tool trolley.
- diameter opening = 92mm
Suitable for the XPCS3, XPCS3L and XPCS4U.
Bi-Metall Lochsagen Satz industrial Suitable for cast steel, soft cast iron, stainless steel, structural steel, (un) alloyed aluminum, bronze, copper, PVC acrylic and wood. - 13pc bimetall hole saws = 3/4'' (19mm), 25/32'' (20mm), 7/8'' (22mm), 1-1/8'' (29mm), 1-1/4'' (32mm), 1-3/8'' (35mm), 1-1/2'' (38mm), 1-3/4'' (44mm), 2'' (51mm), 2-1/4'' (57mm), 2-5/8'' (67mm), 3'' (76mm) - 2pc arbors = hex fit 14-30mm, hex fit 32-210mm - 1pc drill = 1/4'' x 105mm - 1pc extension = 12'' for 7/16'' shank - including a strong aluminum case
Bi-Metall Lochsagen Satz Suitable for cast steel, soft cast iron, stainless steel, structural steel, (un) alloyed aluminum, bronze, copper, PVC acrylic and wood. Suited for plumbers. - 6pc bimetall hole saws = 3/4'' (19mm), 7/8'' (22mm), 1-1/8'' (29mm) - 1-1/2'' (38mm), 1-3/4'' (44mm), 2-1/4'' (57mm) - 2pc arbors = 3/8'' hex fit 13-30mm, 7/16'' hex, fit 32-152mm - 1pc adaptor = 1/2-20UNF - 5/8-18UNF - including a strong aluminum case
Bohrer und Gewindeschneidsatz Metrisch 9x taps: - 3mm x 0,5 - 4mm x 0,7 - 5mm x 0,8 - 6mm x 1,0 - 7mm x 1,0 - 8mm x 1,25 - 9mm x 1,25 - 10mm x 1,5 - 12mm x 1,75 9x drill: - 2,5mm - 3,3mm - 4,2mm - 5,0mm - 6,0mm - 6,8mm - 7,8mm - 8,6mm - 10,3mm
Bolt clipper
alloy steel CR-V blade and rubber handle
possible to adjust jaw edge by adjusting bolt
drop forged adapter
Type II class 3 & 4 standard
Cutting ability - size = 14'' - capacity soft materials = 7mm - capacity medium materials = 5mm
Bolt clipper alloy steel CR-V blade and rubber handle possible to adjust jaw edge by adjusting bolt drop forged adapter Type II class 3 & 4 standard Cutting ability - size = 24'' - capacity soft materials = 10mm - capacity medium materials = 8mm
Bolt clipper alloy steel CR-V blade and rubber handle possible to adjust jaw edge by adjusting bolt drop forged adapter Type II class 3 & 4 standard Cutting ability - size = 30'' - capacity soft materials = 13mm - capacity medium materials = 10mm
Bolt clipper alloy steel CR-V blade and rubber handle possible to adjust jaw edge by adjusting bolt drop forged adapter Type II class 3 & 4 standard Cutting ability - size = 36'' - capacity soft materials = 16mm - capacity medium materials = 12mm
Bolt clipper alloy steel CR-V blade and rubber handle possible to adjust jaw edge by adjusting bolt drop forged adapter Type II class 3 & 4 standard Cutting ability - size = 42'' - capacity soft materials = 19mm - capacity medium materials = 14mm
Bördelgerät Satz 5
This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.
pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm
pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
pipe cutter
spreader
Brechstange Kuhfuß satz
Special pry bar with conical end for aligning and bended head for prying.
Lengths:
- 150mm
- 300mm
- 400mm
- 500mm
Brechstange satz
- 450mm
Bremskolbenrückstellsatz
This set is suitable for turning and pushing back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.Suitable for almost any car brand.
1 spindle right thread
1 spindle left thread
2 positioning plates
17 adapter plates