This Falco Sollevatori wheel-free double scissors lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.This built-in double scissor lift model is accessible all around and suitable for many vehicles, including extra low cars. Because of the extendable platforms, the lift is also suitable for small vans.Thanks to its robust construction and thoughtful design, the scissors lift is standard equipped with the following convenient features:
platform length = 1540mm, extendable to 1745mm
electro-hydraulic double transpump
equipped with 2 heavy hydraulic cylinders
automatic venting through vent button
automatic synchronization through sensors
automatic overload protection
pneumatic locking made of high-quality material
control valve for controlling the speed when dropping
limit sensor for limiting the maximum lifting height and the minimum safety height
deadman operation when lifting and lowering
foot protection including acoustic protection signal
Dutch manual including maintenance protocol and CE certificate 2006/42/EG
complies with the NEN-EN1493 safety standard
No time for installation? Our professional installation team is specialized in the installation of Falco lifts! Your bridge will be installed in a correct way. The team thinks along with you about the position and placement of the lift. For the above price is our installation team within a radius of 100km on site including 3 hours of labor for installation. For the extended activities which are not included, there will be a hourly rate of 75,00 excl. VAT. For distances beyond the radius of 100km, we will charge 1,00 euro per kilometer. Note! The surface must at least meet the following requirements: - concrete strength C20 - C25 250kg/com - 200mm thickness - newly poured concrete needs to cure for 28 days Ask for the manual for more information about the surface requirements. Transport of the lift is not included and depends on the unloading facilities. Consult us first to make a suitable appointment for this.
This Falco Sollevatori double scissor lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.Equipped with no less than four hydraulic cylinders (two per platform), this lift has a master-slave lifting system and also a locking system. This means that the lift is safe in any position and does not have to be lowered before work on the car can be done. It is also not necessary to first raise the lift to get out of the locking system, making the lift much easier to use and suitable for more applications than mechanically locked lifts.Thanks to its robust construction and thoughtful design, this double scissor lift is standard equipped with the following convenient features:
total platform length of 2030mm
master-slave hydraulic system
electro-hydraulic lift with 4 cylinders
low profile with minimum lifting height of 117mm
automatic synchronization
homologated and certified product according to EN1493:2010
fully automatic scissor lift / scissor bridge / scissor lift Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications.This Falco Sollevatori scissor lift is of high quality and suitable for professional use. At Falco Sollevatori quality and finish come first.The overall design is very suitable for supporting lift vehicles, wheel alignment, runout processes for 3D wheel alignment and body inspection, and maintenance services.Minimal size for lift in lowest position suitable for lifting low-profile vehicles. Also ideal for placing on the floor use and installation.Due to the long carriageways of 4.5m, the lift is suitable for small and large passenger cars, buses and heavier commercial vehicles.The hydraulic system is equipped with 4 hydraulic cylinders and an extra mechanical safety system. It’s more secure and reliable thanks to its robust construction and well thought-out design, this scissor lift is equipped with the following handy features as standard:
fully automatic double scissor lift / scissor bridge / scissor lift / scissor liftThis Falco Sollevatori double scissor lift is of high quality and extremely suitable for professional use. At Falco lift bridges, quality and finish come first.
This alignment model is equipped with a bridge jack, turntables and long rear wheel plates. With the aid of the bridge jack, wheel-free lifting is possible up to a height of 450 mm above the roadways.
Due to the long carriageways of 4.8m, the bridge is suitable for small and large passenger cars, buses and heavier commercial vehicles.
Thanks to its robust construction and well thought-out design, this double scissor bridge is equipped with the following handy features as standard:
Technical specifications:
Vollautomatische Scherenhebebühne / Scherenhebebühne / Doppelscherenbrücke / Autolift / Autoliftbrücke / Scherenbrücke
This Falco Sollevatori double scissors lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.Equipped with no less than four hydraulic cylinders (two per platform), this lift has a master-slave lifting system. This means that the lift is safe in any position and does not have to be lowered before work on the car can be done. It is also not necessary to first raise the lift to get out of the locking system, making the lift much easier to use and suitable for more applications than mechanically locked lifts.Thanks to its robust construction and thoughtful design, this double scissor lift is standard equipped with the following convenient features:
Fully automatic car bridge / cleaning bridge / scissor bridge / scissor lift / scissor lift bridge
This Falco tire bridge focuses on efficiency and ease of use. Thanks to the Sync safety system, it always drops synchronously. The bridge is equipped with an acoustic signal and a rail is fitted at the bottom for foot protection. The lanes are made of wear-resistant tear plate over the entire length. The stable solid design is easy to use anywhere on a straight surface and also includes mounting holes for fixed installation. It can be used both mobile and fixed. The bridge is supplied as standard including a wheel set, which makes it easy to move the bridge and allows you to make optimum use of your workshop.
Characteristics:
Extra low ramp height of 110mm
Mobile tire bridge
Powerful hydraulic cylinders
Fully automated electric safety interlock
Foot protection incl. acoustic safety signal
Start elevator
Adjustable ramp / extension piece
Foot protection switch
Emergency lowering valve
Incl. Wheel set, plug and rubber support blocks
lock = automatic
Autobrücke / Reinigungsbrücke / Scherenbrücke / Scherenhebebühne / Scherenhebebrücke
Dank der durchdachten Konstruktion der Falco-Brücken sparen Sie Zeit und Mühe. Der Fokus liegt auf einer einfachen Bedienung und einem effizienten Arbeitsablauf. Dank der stabilen Massivbauweise lässt sich der Lift einfach auf einer geraden Fläche aufstellen. Ausgestattet mit nicht weniger als vier Hydraulikzylindern (zwei pro Plattform) verfügt diese Hebebühne über ein TwinX-Hebesystem. Dadurch steht die Brücke in jeder Position sicher und muss nicht abgesenkt werden, bevor Arbeiten am Auto durchgeführt werden können. Außerdem muss die Brücke nicht zuerst angehoben werden, um sie aus der Verriegelung zu lösen, wodurch die Brücke viel bequemer zu verwenden und für mehr Anwendungen geeignet ist als mechanisch verriegelte Brücken. Jede Brücke wird standardmäßig mit einem Radsatz geliefert, der ein leichtes Versetzen der Brücke ermöglicht und Ihnen eine optimale Nutzung Ihrer Werkstatt ermöglicht. Die Brücke ist besonders für große Fahrzeuge geeignet.
Eigenschaften:
Gesamtplattformlänge von 2015 mm
TwinX-Hydrauliksystem
Extra niedrige Rampenhöhe von 105 mm
Mobiler Reifen
4 Leistungsstarke Hydraulikzylinder
Fußschutz inkl. akustisches Sicherheitssignal
Heben starten
Verstellbare Rampe
Inkl. Radsatz und Montageblöcke (40mm)
Entspricht der Sicherheitsnorm NEN-EN1493
Verriegelung = automatisch
