New products

We are constantly on the lookout for new and innovative products! After they have been explicitly tested and improved by our Product Team, they will be added to the assortment. The latest new products can be found on this page.

Air hydraulic pit jack 20 ton long cylinder [PK20L] Air hydraulic pit jack 20 ton long cylinder
mm mm mm Kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit long cylinder
This 20 ton double cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the double cylinder pit jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
2 individually controlled rams offer safe and balanced lifting.
Transversely sliding rams.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

Lifts / Pit jacks Falco Sollevatori PK20L 8720028106387
€ 3,388.00 Incl. VAT https://schema.org/InStock
€ 3,388.00 3388.0 EUR
Air hydraulic pit jack 15 ton [PK15] Air hydraulic pit jack 15 ton
mm mm mm Kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This 15 ton single cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the single cylinder jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
The hydraulic cylinder can be positioned from left to right inside the frame to assure optimal lifting position.
The pit jack moves on four wheels which can be mounted with separate adapter plates, the rollers on the adapter plate’s have roller bearings to ensure easy movement the length of the pit.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

Lifts / Pit jacks Falco Sollevatori PK15 8720028106356
€ 2,541.00 Incl. VAT https://schema.org/InStock
€ 2,541.00 2541.0 EUR
Air hydraulic pit jack 20 ton [PK20] Air hydraulic pit jack 20 ton
mm mm mm Kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit long cylinder
This 20 ton double cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the double cylinder pit jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
2 individually controlled rams offer safe and balanced lifting.
Transversely sliding rams.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

Lifts / Pit jacks Falco Sollevatori PK20 8720028106370
€ 3,146.00 Incl. VAT https://schema.org/InStock
€ 3,146.00 3146.0 EUR
Air hydraulic pit jack 15t long cylinder [PK15L] Air hydraulic pit jack 15t long cylinder
mm mm mm Kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This 15 ton single cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the single cylinder jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
The hydraulic cylinder can be positioned from left to right inside the frame to assure optimal lifting position.
The pit jack moves on four wheels which can be mounted with separate adapter plates, the rollers on the adapter plate’s have roller bearings to ensure easy movement the length of the pit.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

Lifts / Pit jacks Falco Sollevatori PK15L 8720028106363
€ 2,904.00 Incl. VAT https://schema.org/InStock
€ 2,904.00 2904.0 EUR
Short plate + conical wheel for pit jack [PK03A] Short plate + conical wheel for pit jack
mm mm mm Kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This short plate with conical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have conical rail type.
See the datasheet of the pit jacks for more information.
! Set adapter plates contain 2pcs.

Lifts / Pit jacks Falco Sollevatori PK03A 8720028106417
€ 477.95 Incl. VAT https://schema.org/InStock
€ 477.95 477.95 EUR
Short plate + cylindrical wheels for pit jack [PK01A] Short plate + cylindrical wheels for pit jack
mm mm mm Kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This short plate with cylindrical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have straight rail profile.
See the datasheet of the pit jacks for more information.
! Set adapter plates contain 2pcs.

Lifts / Pit jacks Falco Sollevatori PK01A 8720028106394
€ 477.95 Incl. VAT https://schema.org/InStock
€ 477.95 477.95 EUR
Long plate + conical wheel for pit jack [PK04A] Long plate + conical wheel for pit jack
mm mm mm Kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This long plate with conical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have conical rail type.
See the datasheet of the pit jacks for more information.
! Set adapter plates contain 2pcs.

Lifts / Pit jacks Falco Sollevatori PK04A 8720028106424
€ 514.25 Incl. VAT https://schema.org/InStock
€ 514.25 514.25 EUR
Long plate + cylindrical wheel for pit jack [PK02A] Long plate + cylindrical wheel for pit jack
mm mm mm Kg

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This long plate with cylindrical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have straight rail profile.
See the datasheet of the pit jacks for more information.
! Set adapter plates contain 2pcs.

Lifts / Pit jacks Falco Sollevatori PK02A 8720028106400
€ 514.25 Incl. VAT https://schema.org/InStock
€ 514.25 514.25 EUR
Log splitter 22 tons with gasoline engine vertical [LS22BN] Log splitter 22 tons with gasoline engine vertical
mm mm mm Kg

log splitter / wood splitter with gasoline engine

This gasoline engine powered log splitter from Woodcraft does not need an external power supply network and can therefore be used anywhere.
With a pressing force of 22 tons and a large splitting blade, you can easily split logs up to 60 cm long.
The splitter is very mobile and equipped with 2 sturdy support legs for extra stability, which make folding the splitter up and down a lot easier, and also ensures stability during splitting.
Thanks to the foldable catch bracket, the split wood does not immediately fall to the ground. This also ensures that it is possible to split large diameter logs.
The hydraulic cylinder is mounted on a dowel pin that allows the cylinder to slide during splitting, reducing the pressure on the cylinder rod. This makes it less sensitive to wear and leaks.
Because the wood splitter is positioned vertically, it does not require much effort to slide large logs under it.
This product complies with the new Nen standard 609-1/2017.
! Please note that this log splitter is for vertical use only!
Technical specifications:

  • Pressure force 22 tons
  • Cycle time 12.5s
  • hydraulic oil capacity = 24.6L (not included!)
  • max. diameter wood = 34.8 x 61cm
  • max. pressure = 248 bar (3600psi)
  • max. pump output = 11gpm / 41.5L/min
  • wheel size = 16"
  • motor type = YM168F19
  • engine power = 6.5HP (196cc) / 3600rpm
  • equipped with non-return valve
  • splitting knife = 175mm hardened steel
  • max. towing speed = 72km/h
Wood and Metal working / Wood working / Log splitters Woodcraft LS22BN 8720028092345
€ 1,694.00 Incl. VAT https://schema.org/InStock
€ 1,694.00 1694.0 EUR
Log splitter 22 ton with gasoline engine horizontal [LS22BH] Log splitter 22 ton with gasoline engine horizontal
mm mm mm Kg

splitter / wood press / logs / gasoline splitter / splitter horizontal / log splitter / splitter
This gasoline engine powered log splitter from Woodcraft does not need an external power supply network and can therefore be used anywhere.
With a pressing force of 22 tons and a large 43 cm long splitting blade, you can easily split logs up to 50 cm long.
The splitter is very mobile and, thanks to the nose wheel, easy to move and adjust in height. 
Thanks to the foldable collection flap, the split wood is collected instead of scattered on the ground.
The hydraulic cylinder is mounted on a dowel pin that allows the cylinder to slide during splitting, reducing the pressure on the cylinder rod. 
This makes it less sensitive to wear and leaks. This product complies with the new Nen standard 609-1/2017.
Please note that this log splitter is for horizontal use only!
Technical specifications:

  • Pressure force 22 tons
  • Cycle time 11s
  • Hydraulic reservoir 14.5L
  • Required oil 10L
  • Max. wood length 55cm
  • Splitting knife 43cm
  • Hydraulic cylinder 10cm x 51cm
  • Max. pressure 257bar
  • Gear pump 53 L/min, 2-stage
  • Max. traction speed 60km
  • Wheel size 41cm 4.8x8
Wood and Metal working / Wood working / Log splitters Woodcraft LS22BH 8720028106127
€ 1,694.00 Incl. VAT https://schema.org/InStock
€ 1,694.00 1694.0 EUR
Electric log splitter 22 ton horizontal [LS22EH] Electric log splitter 22 ton horizontal
mm mm mm Kg

splitter / wood press/ log splitter / electric splitter / horizontal splitter / wood splitter electric
This wood splitter from Woodcraft has an electro-hydraulic drive, making it an economical way to split wood without using fuel.
With a pressing force of 22 tons and a large 43 cm long splitting blade, you can easily split logs up to 50 cm long.
The splitter is very mobile and, thanks to the nose wheel, easy to move and adjust in height. 
Thanks to the foldable collection flap, the split wood is collected instead of scattered on the ground.
The hydraulic cylinder is mounted on a central mounting shaft that allows the cylinder to move during splitting, reducing the pressure on the cylinder rod. 
This makes it less sensitive to wear and leaks. This product complies with the latest directives 2016/42/EG & Nen standard 609-1/2017.
Please note that this log splitter is for horizontal use only!
Technical specifications:

  • Pressure force 22 tons
  • Cycle time 11s
  • Hydraulic reservoir 14.5L
  • Required oil 10L
  • Max. wood length 55cm
  • Splitting knife 43cm
  • Hydraulic cylinder 10cm x 51cm
  • Max. pressure 25.7Mpa
  • Gear pump 53 L/min, 2-stage
  • Max. traction speed 60km
  • Wheel size 41cm 4.8x8
  • Electric motor 2.2kW, 400V, 2880RPM
Wood and Metal working / Wood working / Log splitters Woodcraft LS22EH 8720028106110
€ 1,754.50 Incl. VAT https://schema.org/InStock
€ 1,754.50 1754.5 EUR
Furniture mover set 600kg [MF060HW] Furniture mover set 600kg
mm mm mm Kg

lift transporters / furniture movers / hand-operated trolley 
This Mammuth hand trolley set is extremely suitable for moving and installing heavy furniture and equipment.
Hand-operated trolley equipped winch handle geared mechanism.
Four swivel castors with roller bearings with non marking poly wheels suitable for carpet floors.
The transporters are easy to operate separately from each other. The objects to be moved are secured with the supplied ratchet straps (or cargo lashings) and can be easily and safely handled by two people.
Set includes two transport units with built-in securing straps.
Technical specifications:

  • Load capacity = 600kg
  • Lifting height = 410mm
  • Lifting plate size = 225x120mm
  • Wheel polyurethane = 150mm
  • Incl. set cargo lashing = 5m
Logistics / Furniture mover Mammuth MF060HW 8720028075591
€ 484.00 Incl. VAT https://schema.org/InStock
€ 484.00 484.0 EUR
Mobile workbench 2 drawers 2 doors [WBG01M] Mobile workbench 2 drawers 2 doors
mm mm mm Kg

tool trolley / mobile workbench
This tool trolley from TOOLBOX4YOU consists of 2 fully extendable drawers with ball bearing guides and 2 doors.
The doors can be centrally locked thanks to the cylinder lock including 2 keys.
The countertop is made of moisture resistant plywood 25mm. 
The tool trolley moves due to 2 all-rubber fixed wheels, and 2 swivel wheels with brakes.
The mobile workbench equipped with a sturdy handle gives you more control while moving.
The shelf inside the cabinet can be set at different heights.
Technical specifications:

  • Countertop thickness: 25mm
  • Drawers front panel: W 440mm x H 165mm (inside: L 480mm x W 410mm)
  • Doors W 440mm x H 555mm (inside cabinet: L 510mm x W 465mm)
Shop equipment / Shop equipment / Industrial workbenches Expert TOOLBOX4YOU WBG01M 8720028107933
€ 665.50 Incl. VAT https://schema.org/InStock
€ 665.50 665.5 EUR
LED working light rechargeable magnetic 7W UltraSlim [WL07LS] LED working light rechargeable magnetic 7W UltraSlim
mm mm mm Kg

hand lamp / dimmable hand lamp / rechargeable dimmable led lamp
This Fluxon work lamp LED is a professional working light that provides a lot of light (700 lumens) thanks to the COB LED. The Light intensity is fully adjustable thanks to the stepless dimmer. Burning time is 2 to 16 hours, depending on the set brightness. The work lamp is equipped with a separately switched top lamp, making inspections in small places easily accessible.
With its magnetic base you can position the lamp 360 degrees, it can also be hung with a 180 degree foldable hanging hook that will let you use this working light hands-free in any situation. The Fluxon work lamp is equipped with a battery indicator and a Li-ion 3.7V 2600mAh rechargeable battery, including USB charging cable.
Technical specifications:

  • Type of bulb: COB LED
  • Light color: neutral white 6500K
  • Output: 7W
  • Brightness: 700 Lm
  • USB connection: Micro usb
  • Charger time: 4 hours
  • Work time: 2 - 16 hours
  • Battery: Li-ion 3.7V 2600mAh
Marine equipment and watersports / Lighting / Working lights Fluxon WL07LS 8720028104062
€ 45.38 Incl. VAT https://schema.org/InStock
€ 45.38 45.38 EUR
Magnetic welding ground clamp 600A [WM600AE] Magnetic welding ground clamp 600A
mm mm mm Kg

rotary on/off knob grounding magnet / ground clamp magnetic
Easy operation with rotary on/off knob, Soldatech magnetic ground clamp can be turned on and off.
The welding process is accelerated by the ability to quickly place the ground clamp and can be used on both flat and round workpieces.
Tighten the ground clamp in a clean place with a quick turn and start welding.

Welding and cutting equipment / Welding magnets Soldatech WM600AE 8720028105724
€ 69.58 Incl. VAT https://schema.org/SoldOut
€ 69.58 69.58 EUR
Magnetic welding ground clamp 200A [WM200AE] Magnetic welding ground clamp 200A
mm mm mm Kg

rotary on/off knob grounding magnet / ground clamp magnetic
Easy operation with rotary on/off knob, Soldatech magnetic ground clamp can be turned on and off.
The welding process is accelerated by the ability to quickly place the ground clamp and can be used on both flat and round workpieces.
Tighten the ground clamp in a clean place with a quick turn and start welding.

Welding and cutting equipment / Welding magnets Soldatech WM200AE 8720028105717
€ 42.35 Incl. VAT https://schema.org/InStock
€ 42.35 42.35 EUR
Arrow welding magnet 50kg [WM50] Arrow welding magnet 50kg
mm mm mm Kg

angle welding magnet / arrow magnet / angle fixing device magnetic / position holder magnetic / welder tool for clamping / arrow magnetic holder
This Soldatech welding magnet is the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The arrow welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
Equipped with through holes, multiple magnets can be linked together to increase the desired adhesive force.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
The powerful magnetic angle welding tools support material at 45°, 90°, and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM50 8720028105663
€ 11.50 Incl. VAT https://schema.org/InStock
€ 11.50 11.5 EUR
Switchable arrow welding magnet 30 - 50kg [WM30TS] Switchable arrow welding magnet 30 - 50kg
mm mm mm Kg

angle welding magnet / arrow magnet / angle fixing device magnetic / position holder magnetic / switch arrow welding magnet / welding magnet with on/off switch / on-off switch magnetic holder/ welder tool for clamping / arrow magnetic holder
This Soldatech welding magnet is the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The switch arrow welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
Equipped with a centrally placed rotary switch, the magnet can easily be switched on and off and no iron residues will remain on the magnet when the magnet is off. The welding magnet also has 3 positions from powerful, very powerful and off.
The powerful magnetic angle welding tools support material at 45°, 90° and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM30TS 8720028105694
€ 18.15 Incl. VAT https://schema.org/InStock
€ 18.15 18.150000000000002 EUR
Switchable hexagon welding magnet 40kg [WM30HS] Switchable hexagon welding magnet 40kg
mm mm mm Kg

hexagon welding magnet / multi angle positioning magnet /multi angle magnet on/off / position holder magnetic / switch welding magnet / welding magnet with on/off switch / on-off switch magnetic holder/ welder tool for clamping
This hexagonal switchable welding magnet from Soldatech is very versatile due to the multiple angles. 
The switch hexagonal welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
The ideal tool for precise welding of corners, there is complete freedom to work with both hands. The welding magnet can also be used for assembly work, pipe installations.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
Equipped with a centrally placed rotary switch, the magnet can easily be switched on and off and no iron residues will remain on the magnet when the magnet is off. 
The welding magnet also has 3 positions from powerful, very powerful and off.
The powerful multi angle positioning magnet supports material at 30°, 45°, 60°, 75°, 90° and 105° for easy access and allows you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM30HS 8720028105700
€ 19.36 Incl. VAT https://schema.org/InStock
€ 19.36 19.36 EUR
Arrow welding magnet 25kg [WM25] Arrow welding magnet 25kg
mm mm mm Kg

angle welding magnet / arrow magnet / angle fixing device magnetic / position holder magnetic / welder tool for clamping / arrow magnetic holder
This Soldatech welding magnet is the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The arrow welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
Equipped with through holes, multiple magnets can be linked together to increase the desired adhesive force.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
The powerful magnetic angle welding tools support material at 45°, 90°, and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM25 8720028105656
€ 5.45 Incl. VAT https://schema.org/InStock
€ 5.45 5.45 EUR