Ionen-Schlagschrauber mit bürstenlosem Motor / Akku-Schlagschrauber / Professioneller bürstenloser Schlagschrauber / Li-Ionen-Schlagschrauber / Hochleistungs-Akkuschlagschrauber
Dieser Hochleistungs-Schlagschrauber von Fluxon verfügt über viele besondere Eigenschaften und ist für Profis und Semi-Profis mit häufigen Projekten eine gute Wahl, da seine Größe und sein Drehmoment für eine breite Palette von Arbeiten nützlich sind. Ideal für den Automobilbau und industrielle Projekte.
Der effiziente bürstenlose Motor sorgt für eine hohe Lebensdauer und ermöglicht zudem eine präzise stufenlose Drehzahlregelung über den Abzug des Schlagschraubers.
Der 18 V Li-Ion-Akku mit einer Kapazität von 4,0 Ah liefert viel Energie, um jede Arbeit zu erledigen. Die Akkuanzeige ermöglicht es Ihnen, den Akkustand zu überprüfen, bevor Sie mit Ihrem Projekt beginnen, und stellt sicher, dass Sie den Akku rechtzeitig aufladen. 
Der Schlagschrauber wird über einen Richtungsschalter gesteuert, der automatisch die Abzugssperre in der Mittelstellung einrastet. Sobald die Richtung gewählt ist, kann der Abzug eine variable Drehzahl von bis zu 2400 U/min steuern.
Ein weiteres großartiges Merkmal des Akku-Schlagschraubers ist die PowerProgram-Taste, die die Auswahl von 3 Drehmomenteinstellungen ermöglicht: Volle Leistung / Halbe Leistung / Schraubenschlüssel fest, und einen Rückwärtsgang mit speziellem Auto-Break-Modus. Dies macht ihn zu einem sehr vielseitigen Werkzeug, das sich für eine Vielzahl von Befestigungs- und mechanischen Arbeiten eignet.
Der Modus zur Auswahl des Anzugsdrehmoments ermöglicht eine bessere Kontrolle über die Leistung des Werkzeugs, da vor der Verwendung des Schlagschraubers 3 Modi ausgewählt werden können.
Der Rückwärtsgangmodus ist mit 2 voreingestellten Modi verfügbar:
Modus 1 - voller Rückwärtsgang 1080 Nm Drehmoment zum Lösen von Muttern.
Modus 2 - automatische Unterbrechung. Wenn der Auslöser gedrückt wird, beginnt das Werkzeug rückwärts zu hämmern. Sobald sich die Schraube löst und kein Widerstand mehr vorhanden ist, stoppt das Werkzeug sofort die Rückwärtsbewegung.
Der 1/2 Schlagschrauber ist mit einer leistungsstarken eingebauten LED-Arbeitsleuchte ausgestattet, die den Arbeitsbereich ohne zusätzliche Lichtquelle ausleuchtet.
Das Werkzeug verfügt über einen Kühlluftauslass und ist mit einer Batterieschutzschaltung ausgestattet: Sie schützt die Batterie vor Schäden durch Überentladung, hohe Temperaturen oder Überstrom.
Der 18V 4.0Ah Fluxon Akku wird mit den hochwertigsten Akkuzellen hergestellt, die auf dem Markt erhältlich sind. Darüber hinaus ist er mit der neuesten BMS (Batterie-Management-Software) ausgestattet, um eine optimale Leistung, Lebensdauer der Batterie und Schutz vor Überladung und Überhitzung zu gewährleisten.
Das Gehäuse des Akkus ist aus feuerhemmendem Material gefertigt, um maximale Sicherheit zu gewährleisten.

Das Set enthält:
1x Schlagschrauber IWC12N10
2x 4,0Ah Li-Ionen-Akku IBC18V4
1x Batterieladegerät
1x strapazierfähiger Aufbewahrungskoffer
1x Benutzerhandbuch

Ii-ion impact driver with brushless motor / cordless impact tool / professional brushless impact wrench / Li-Ion impact wrench / heavy-duty cordless impact wrench
This heavy-duty industrial impact wrench from Fluxon has many special features and is a great find for professionals. Ideal for all general and heavy duty repairs and maintenance applications, automotive engineering and industrial projects.
The efficient brushless motor ensures a high lifetime and also allows precise stepless speed control through the trigger of the impact wrench.
Powered by a two 20V, 4.0Ah capacity Li-Ion battery which provides lots of energy to finish each job. The battery indicator lets you check the battery stats before starting on your project and ensures you to charge the battery on time. 
The impact wrench is controlled by a directional switch which automatically engages the trigger lock in central position. Once direction is chosen the trigger control can manage a variable speed up to 1800 rpm.
Another great feature of the cordless impact wrench is the PowerProgram button, which allows selection of the 3 fastening torque settings: Full Power / Half Power / Wrench Tight, and a reverse mode with special auto break mode. It makes quite a versatile tool, good for a wide variety of fastening and mechanical jobs.
The fastening torque selection mode allows more control of the power of the tool as 3 modes can be selected before using the impact wrench.
The reverse selection mode is available with 2 preset modes:
Mode 1 - full reverse 1700 Nm nut busting torque.
Mode 2 - auto break. When the trigger is pushed, the tools will start hammering in reverse, as soon as the bolt breaks loose and there is no resistance, the tool will immediately stop reverse motion.
The 1/2 impact wrench is equipped with a powerful built-in LED work light which illuminates the workspace without need for an additional light source.
Tool has a cooling air outlet and is equipped with a battery protection circuit: designed to protect the battery from damage due to over-discharge, high temperature or over-current.

What’s in the box?

• 1xImpact wrench IWC34N17
• 2x4.0Ah Li-ion Battery BWC1234
• 1xCharger
• 1xHeavy-duty storage case
• 1xUser manual.

Ionen-Schlagschrauber mit bürstenlosem Motor / Akku-Schlagschrauber / Professioneller bürstenloser Schlagschrauber / Li-Ionen-Schlagschrauber / Hochleistungs-Akkuschlagschrauber
Dieser Akku-Schlagschrauber von Fluxon hat viele besondere Eigenschaften und ist eine gute Wahl für Profis, die ein kleines und leistungsstarkes Gerät benötigen. Dieses Werkzeug zeichnet sich durch seine Autonomie und sein geringes Gewicht aus, hat einen ergonomischen Griff und kann dank des kurzen Schafts auch an engen Stellen eingesetzt werden, wo ein hohes Drehmoment erforderlich ist.
Der effiziente bürstenlose Motor gewährleistet eine hohe Lebensdauer und ermöglicht außerdem eine präzise stufenlose Drehzahlregelung über den Abzug des Schlagschraubers.
Der 18V Li-Ion-Akku mit 4,0Ah Kapazität liefert viel Energie für jede Arbeit. Die Akkuanzeige ermöglicht es Ihnen, den Akkustand zu überprüfen, bevor Sie mit Ihrem Projekt beginnen, und stellt sicher, dass Sie den Akku rechtzeitig aufladen.
Der Schlagschrauber wird über einen Richtungsschalter gesteuert, der automatisch die Abzugssperre in der Mittelstellung einrastet. Sobald die Richtung gewählt ist, kann die Abzugskontrolle eine variable Geschwindigkeit von bis zu 1800 U/min steuern.
Ein weiteres großartiges Merkmal des Akku-Schlagschraubers ist der PowerProgram-Knopf, der die Auswahl von 2 Drehmoment-Modi ermöglicht: Volle Leistung / Halbe Leistung & ein Reverse-Modus mit speziellem Auto-Break-Modus.
Der Modus zur Auswahl des Anzugsdrehmoments ermöglicht eine bessere Kontrolle über die Leistung des Werkzeugs, da 3 Modi ausgewählt werden können, bevor der Schlagschrauber eingesetzt wird.
Der Modus zur Auswahl des Rückwärtsgangs ist mit 2 voreingestellten Modi verfügbar:
Modus 1 - voller Rückwärtsgang mit 1700 Nm Drehmoment zum Lösen von Muttern.
Modus 2 - automatische Unterbrechung. Wenn der Auslöser gedrückt wird, beginnt das Werkzeug rückwärts zu hämmern. Sobald sich die Schraube löst und kein Widerstand mehr vorhanden ist, stoppt das Werkzeug sofort die Rückwärtsbewegung.
Der 1/2 Schlagschrauber ist mit einem leistungsstarken eingebauten LED-Arbeitslicht ausgestattet, das den Arbeitsbereich ohne zusätzliche Lichtquelle ausleuchtet.
Das Werkzeug verfügt über einen Kühlluftauslass und ist mit einer Batterieschutzschaltung ausgestattet: Sie schützt die Batterie vor Schäden durch Überentladung, hohe Temperaturen oder Überstrom.
Der 18V 4.0Ah Fluxon Akku wird mit den hochwertigsten Akkuzellen hergestellt, die auf dem Markt erhältlich sind. Darüber hinaus ist er mit der neuesten BMS (Batterie-Management-Software) ausgestattet, um eine optimale Leistung, Lebensdauer der Batterie und Schutz vor Überladung und Überhitzung zu gewährleisten.
Das Gehäuse des Akkus ist aus feuerhemmendem Material gefertigt, um maximale Sicherheit zu gewährleisten. 
Das Set enthält:
1x Schlagschrauber IWC12N17
2x 4,0Ah Li-Ionen-Akku IBC18V4
1x Batterieladegerät
1x strapazierfähiger Aufbewahrungskoffer
1x Benutzerhandbuch.

jacking beam / hydraulic pit jack / hydropneumatic jack pit long cylinder
This 20 ton double cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the double cylinder pit jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
2 individually controlled rams offer safe and balanced lifting.
Transversely sliding rams.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This 15 ton single cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the single cylinder jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
The hydraulic cylinder can be positioned from left to right inside the frame to assure optimal lifting position.
The pit jack moves on four wheels which can be mounted with separate adapter plates, the rollers on the adapter plate’s have roller bearings to ensure easy movement the length of the pit.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

jacking beam / hydraulic pit jack / hydropneumatic jack pit long cylinder
This 20 ton double cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the double cylinder pit jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
2 individually controlled rams offer safe and balanced lifting.
Transversely sliding rams.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This 15 ton single cylinder pit jack from Falco Sollevatori is designed to safely lift cars, buses, vans, trucks, forklifts and more with maximum performance and safety features.
Falco Heavy duty pit jack has the following features:
built-in pneumatic hydraulic pump with dual pump lifting system. This system provides a higher lifting speed and reduces the speed under load.
equipped with a variable lowering speed thanks to a double throttle valve. Due to this system, the jack lowers slowly when a load is placed on it and automatically lowers faster when there is no weight on the cylinder. This makes the pit jack not only safe, but also efficient to use.
The smart design of the single cylinder jack provides maximum lift and maximum capability:
The frame of the pit jack can be adjusted in width and the modular side plates allow for several different adapter options to be selected. As a result, it can be adapted to all standard entry platforms and manhole shapes.
The hydraulic cylinder can be positioned from left to right inside the frame to assure optimal lifting position.
The pit jack moves on four wheels which can be mounted with separate adapter plates, the rollers on the adapter plate’s have roller bearings to ensure easy movement the length of the pit.
Each pit jack can be customised to fit the pit frame by selecting the correct adapter plates. Depending on the type rails, a cylindrical or conical adapter can be selected. Depending on the required lifting height long and short adapter plates can be selected.

! Please note, the air hydraulic pit jack is supplied without adapter plates!
These can be selected according to the pit profile and dimensions.

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This short plate with conical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have conical rail type.
See the datasheet of the pit jacks for more information.
! Set adapter plates contain 2pcs.

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This long plate with cylindrical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have straight rail profile.
See the datasheet of the pit jacks for more information.
! Set adapter plates contain 2pcs.

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This short plate with cylindrical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have straight rail profile.
See the datasheet of the pit jacks for more information.
! Set adapter plates contain 2pcs.

jacking beam / hydraulic pit jack / hydropneumatic jack pit short
This long plate with conical wheels for pit jack from Falco Sollevatori can be adapted to entry platforms and manhole shapes which have conical rail type.
See the datasheet of the pit jacks for more information.
! Set adapter plates contain 2pcs.

log splitter / wood splitter with gasoline engine

This gasoline engine powered log splitter from Woodcraft does not need an external power supply network and can therefore be used anywhere.
With a pressing force of 22 tons and a large splitting blade, you can easily split logs up to 60 cm long.
The splitter is very mobile and equipped with 2 sturdy support legs for extra stability, which make folding the splitter up and down a lot easier, and also ensures stability during splitting.
Thanks to the foldable catch bracket, the split wood does not immediately fall to the ground. This also ensures that it is possible to split large diameter logs.
The hydraulic cylinder is mounted on a dowel pin that allows the cylinder to slide during splitting, reducing the pressure on the cylinder rod. This makes it less sensitive to wear and leaks.
Because the wood splitter is positioned vertically, it does not require much effort to slide large logs under it.
This product complies with the new Nen standard 609-1/2017.
! Please note that this log splitter is for vertical use only!

Technical specifications:

• Pressure force 22 tons
• Cycle time 12.5s
• hydraulic oil capacity = 24.6L (not included!)
• max. diameter wood = 34.8 x 61cm
• max. pressure = 248 bar (3600psi)
• max. pump output = 11gpm / 41.5L/min
• wheel size = 16"
• motor type = YM168F19
• engine power = 6.5HP (196cc) / 3600rpm
• equipped with non-return valve
• splitting knife = 175mm hardened steel
• max. towing speed = 72km/h

splitter / wood press / logs / gasoline splitter / splitter horizontal / log splitter / splitter
This gasoline engine powered log splitter from Woodcraft does not need an external power supply network and can therefore be used anywhere.
With a pressing force of 22 tons and a large 43 cm long splitting blade, you can easily split logs up to 50 cm long.
The splitter is very mobile and, thanks to the nose wheel, easy to move and adjust in height. 
Thanks to the foldable collection flap, the split wood is collected instead of scattered on the ground.
The hydraulic cylinder is mounted on a dowel pin that allows the cylinder to slide during splitting, reducing the pressure on the cylinder rod. 
This makes it less sensitive to wear and leaks. This product complies with the new Nen standard 609-1/2017.
Please note that this log splitter is for horizontal use only!
Technical specifications:

• Pressure force 22 tons
• Cycle time 11s
• Hydraulic reservoir 14.5L
• Required oil 10L
• Max. wood length 55cm
• Splitting knife 43cm
• Hydraulic cylinder 10cm x 51cm
• Max. pressure 257bar
• Gear pump 53 L/min, 2-stage
• Max. traction speed 60km
• Wheel size 41cm 4.8x8

splitter / wood press/ log splitter / electric splitter / horizontal splitter / wood splitter electric
This wood splitter from Woodcraft has an electro-hydraulic drive, making it an economical way to split wood without using fuel.
With a pressing force of 22 tons and a large 43 cm long splitting blade, you can easily split logs up to 50 cm long.
The splitter is very mobile and, thanks to the nose wheel, easy to move and adjust in height. 
Thanks to the foldable collection flap, the split wood is collected instead of scattered on the ground.
The hydraulic cylinder is mounted on a central mounting shaft that allows the cylinder to move during splitting, reducing the pressure on the cylinder rod. 
This makes it less sensitive to wear and leaks. This product complies with the latest directives 2016/42/EG & Nen standard 609-1/2017.
Please note that this log splitter is for horizontal use only!
Technical specifications:

• Pressure force 22 tons
• Cycle time 11s
• Hydraulic reservoir 14.5L
• Required oil 10L
• Max. wood length 55cm
• Splitting knife 43cm
• Hydraulic cylinder 10cm x 51cm
• Max. pressure 25.7Mpa
• Gear pump 53 L/min, 2-stage
• Max. traction speed 60km
• Wheel size 41cm 4.8x8
• Electric motor 2.2kW, 400V, 2880RPM

lift transporters / furniture movers / hand-operated trolley 
This Mammuth hand trolley set is extremely suitable for moving and installing heavy furniture and equipment.
Hand-operated trolley equipped winch handle geared mechanism.
Four swivel castors with roller bearings with non marking poly wheels suitable for carpet floors.
The transporters are easy to operate separately from each other. The objects to be moved are secured with the supplied ratchet straps (or cargo lashings) and can be easily and safely handled by two people.
Set includes two transport units with built-in securing straps.
Technical specifications:

• Load capacity = 600kg
• Lifting height = 410mm
• Lifting plate size = 225x120mm
• Wheel polyurethane = 150mm
• Incl. set cargo lashing = 5m

tool trolley / mobile workbench
This tool trolley from TOOLBOX4YOU consists of 2 fully extendable drawers with ball bearing guides and 2 doors.
The doors can be centrally locked thanks to the cylinder lock including 2 keys.
The countertop is made of moisture resistant plywood 25mm. 
The tool trolley moves due to 2 all-rubber fixed wheels, and 2 swivel wheels with brakes.
The mobile workbench equipped with a sturdy handle gives you more control while moving.
The shelf inside the cabinet can be set at different heights.
Technical specifications:

• Countertop thickness: 25mm
• Drawers front panel: W 440mm x H 165mm (inside: L 480mm x W 410mm)
• Doors W 440mm x H 555mm (inside cabinet: L 510mm x W 465mm)

hand lamp / dimmable hand lamp / rechargeable dimmable led lamp
This Fluxon work lamp LED is a professional working light that provides a lot of light (700 lumens) thanks to the COB LED. The Light intensity is fully adjustable thanks to the stepless dimmer. Burning time is 2 to 16 hours, depending on the set brightness. The work lamp is equipped with a separately switched top lamp, making inspections in small places easily accessible.
With its magnetic base you can position the lamp 360 degrees, it can also be hung with a 180 degree foldable hanging hook that will let you use this working light hands-free in any situation. The Fluxon work lamp is equipped with a battery indicator and a Li-ion 3.7V 2600mAh rechargeable battery, including USB charging cable.

Technical specifications:

• Type of bulb: COB LED
• Light color: neutral white 6500K
• Output: 7W
• Brightness: 700 Lm
• USB connection: Micro usb
• Charger time: 4 hours
• Work time: 2 - 16 hours
• Battery: Li-ion 3.7V 2600mAh

rotary on/off knob grounding magnet / ground clamp magnetic
Easy operation with rotary on/off knob, Soldatech magnetic ground clamp can be turned on and off.
The welding process is accelerated by the ability to quickly place the ground clamp and can be used on both flat and round workpieces.
Tighten the ground clamp in a clean place with a quick turn and start welding.

rotary on/off knob grounding magnet / ground clamp magnetic
Easy operation with rotary on/off knob, Soldatech magnetic ground clamp can be turned on and off.
The welding process is accelerated by the ability to quickly place the ground clamp and can be used on both flat and round workpieces.
Tighten the ground clamp in a clean place with a quick turn and start welding.

angle welding magnets set / arrow magnet / angle fixing device magnetic / position holder magnetic / welder tool for clamping / arrow magnetic holder
These Soldatech welding magnets set of 2 pieces are the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The arrow welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
The powerful magnetic angle welding tools support material at 45°, 90°, and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.