New products

We are constantly on the lookout for new and innovative products! After they have been explicitly tested and improved by our Product Team, they will be added to the assortment. The latest new products can be found on this page.

Switchable arrow welding magnet 30 - 50kg [WM30TS] Switchable arrow welding magnet 30 - 50kg
mm mm mm Kg

angle welding magnet / arrow magnet / angle fixing device magnetic / position holder magnetic / switch arrow welding magnet / welding magnet with on/off switch / on-off switch magnetic holder/ welder tool for clamping / arrow magnetic holder
This Soldatech welding magnet is the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The switch arrow welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
Equipped with a centrally placed rotary switch, the magnet can easily be switched on and off and no iron residues will remain on the magnet when the magnet is off. The welding magnet also has 3 positions from powerful, very powerful and off.
The powerful magnetic angle welding tools support material at 45°, 90° and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM30TS 8720028105694
€ 18.15 Incl. VAT https://schema.org/InStock
€ 18.15 18.150000000000002 EUR
Multi-angle welding magnet 40kg [WM40MA] Multi-angle welding magnet 40kg
mm mm mm Kg

multi angle positioning magnet / welding magnet set / angle welding magnet / angle fixing device magnetic / position holder magnetic
This Soldatech welding magnet is the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
The powerful magnetic angle welding tools support material at 30°, 45°, 60° and 90° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM40MA 8720028105601
€ 22.39 Incl. VAT https://schema.org/InStock
€ 22.39 22.39 EUR
Arrow welding magnet 75kg [WM75] Arrow welding magnet 75kg
mm mm mm Kg

angle welding magnet / arrow magnet / angle fixing device magnetic / position holder magnetic / welder tool for clamping / arrow magnetic holder
This Soldatech welding magnet is the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The arrow welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
Equipped with through holes, multiple magnets can be linked together to increase the desired adhesive force.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
The powerful magnetic angle welding tools support material at 45°, 90°, and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM75 8720028105670
€ 18.15 Incl. VAT https://schema.org/InStock
€ 18.15 18.150000000000002 EUR
Arrow welding magnet 2pcs 12kg [WM12SET] Arrow welding magnet 2pcs 12kg
mm mm mm Kg

angle welding magnets set / arrow magnet / angle fixing device magnetic / position holder magnetic / welder tool for clamping / arrow magnetic holder
These Soldatech welding magnets set of 2 pieces are the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The arrow welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
The powerful magnetic angle welding tools support material at 45°, 90°, and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM12SET 8720028105649
€ 5.45 Incl. VAT https://schema.org/InStock
€ 5.45 5.45 EUR
Multi-angle welding magnet set 2pcs 15kg [WM15MAS] Multi-angle welding magnet set 2pcs 15kg
mm mm mm Kg

multi angle positioning magnet / welding magnet set / angle welding magnet / angle fixing device magnetic / position holder magnetic
These Soldatech welding magnets set of 2 pieces are the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The multi-angle welding magnet set is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
The powerful magnetic angle welding tools support material at 30°, 45°, 60°, and 90° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM15MAS 8720028105595
€ 21.78 Incl. VAT https://schema.org/InStock
€ 21.78 21.78 EUR
Dual use welding magnet set 2pcs 17kg [WM17DUS] Dual use welding magnet set 2pcs 17kg
mm mm mm Kg

corner magnet / angle welding magnets set / angle fixing device magnetic / position holder magnetic / welder tool for clamping
The welding corner magnet set from Soldatech is extremely suitable for setting corners with overhanging sheet metal. Which also leaves enough space to weld the whole. 
These Soldatech welding magnets set of 2 pieces are the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The angle welding magnets set are convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
Equipped with through holes, multiple magnets can be linked together to increase the desired adhesive force.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
These corner welding magnets can create 90° corners by holding from the outside, and it can provide an unobstructed area for inside tack welds. Use the magnets outer edge to set up materials at 60°. It is also possible to connect the 2 magnets next to each other, to make a 120 degree angle.

Welding and cutting equipment / Welding magnets Soldatech WM17DUS 8720028105588
€ 24.20 Incl. VAT https://schema.org/InStock
€ 24.20 24.2 EUR
Adjustable angle welding magnet 36kg [WM36AA] Adjustable angle welding magnet 36kg
mm mm mm Kg

dual-use welding magnet / corner magnet / angle welding magnets / angle fixing device magnetic / position holder magnetic / welder tool for clamping
The adjustable angle welding magnet from Soldatech allows you to work at different angles from 15 to 200 degrees for easy access and welding, assembly and marking.
The central adjustment point is provided with a clear scale that allows the corner welding magnet to be infinitely adjusted to any angle.
The welding magnet can be used for both straight surfaces and curved surfaces and can also be used for assembly work, pipe installations.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.

Welding and cutting equipment / Welding magnets Soldatech WM36AA 8720028105618
€ 33.28 Incl. VAT https://schema.org/InStock
€ 33.28 33.28 EUR
Switchable arrow welding magnet 15 - 20kg [WM15TS] Switchable arrow welding magnet 15 - 20kg
mm mm mm Kg

angle welding magnet / arrow magnet / angle fixing device magnetic / position holder magnetic / switch arrow welding magnet / welding magnet with on/off switch / on-off switch magnetic holder/ welder tool for clamping / arrow magnetic holder
This Soldatech welding magnet is the ideal tool to accurately weld corners, it sticks solidly and ensures hand free welding.
The switch arrow welding magnet is convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.
The welding magnet is completely sealed so that no dirt or iron residues can reach the magnet for even higher durability.
Equipped with a centrally placed rotary switch, the magnet can easily be switched on and off and no iron residues will remain on the magnet when the magnet is off. The welding magnet also has 3 positions from powerful, very powerful and off.
The powerful magnetic angle welding tools support material at 45°, 90° and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.

Welding and cutting equipment / Welding magnets Soldatech WM15TS 8720028105687
€ 12.10 Incl. VAT https://schema.org/InStock
€ 12.10 12.1 EUR
Welding magnet adjustable angles dual switch 30kg [WM30DSAA] Welding magnet adjustable angles dual switch 30kg
mm mm mm Kg

dual-use welding magnet / corner magnet / angle welding magnets / angle fixing device magnetic / position holder magnetic / welder tool for clamping
The adjustable welding magnet from Soldatech can be used for any angle between 15 and 210 degrees, each side has its own magnet so that the workpiece is better held in place. 
Thanks to the double switch position, for independent work, they can be turned on and off separately from each other, and no iron remains will stick to the magnet when the magnet is off.
The central adjustment point is provided with a clear scale that allows the corner welding magnet to be infinitely adjusted to any angle.
The welding magnet can be used for both straight surfaces and curved surfaces and can also be used for assembly work, pipe installations.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.

Welding and cutting equipment / Welding magnets Soldatech WM30DSAA 8720028105625
€ 47.80 Incl. VAT https://schema.org/InStock
€ 47.80 47.800000000000004 EUR
Welding magnet adjustable angles dual switch 50kg [WM50DSAA] Welding magnet adjustable angles dual switch 50kg
mm mm mm Kg

dual-use welding magnet / corner magnet / angle welding magnets / angle fixing device magnetic / position holder magnetic / welder tool for clamping
The adjustable welding magnet from Soldatech can be used for any angle between 15 and 210 degrees, each side has its own magnet so that the workpiece is better held in place. 
Thanks to the double switch position, for independent work, they can be turned on and off separately from each other, and no iron remains will stick to the magnet when the magnet is off.
The central adjustment point is provided with a clear scale that allows the corner welding magnet to be infinitely adjusted to any angle.
The welding magnet can be used for both straight surfaces and curved surfaces and can also be used for assembly work, pipe installations.
Thanks to high-quality A-3 steel with a double-walled galvanized outer shell the magnet is extra powerful, durable and resistant to rust and corrosion.

Welding and cutting equipment / Welding magnets Soldatech WM50DSAA 8720028105632
€ 66.55 Incl. VAT https://schema.org/InStock
€ 66.55 66.55 EUR
Aluminium stepladder 4 steps [AMT04] Aluminium stepladder 4 steps
mm mm mm Kg

platform stepladder / work stand / wide platform steps
The TORSO 4-step aluminium stairs stand out for its stability and high strength. Industrial grade stairs can be used in all types of work, for construction, plastering.
The stepladder has a double profile for extra strength. The model is made of durable aluminium and has fully welded aluminium construction equipped with wear-resistant anti-slip feet. Large standing platform of 550 x 300 mm.
Furthermore, the Torso Platform stepladder is equipped with a wide standing surface, anti-slip profile, and robust step feet. Thanks to the rubber feet, the stand does not slip even on slippery floors.
Technical specifications:

  • Number of steps: 4
  • Material: aluminium
  • Load capacity: 150 Kg
  • Dimensions steps = 350 x 580 mm
  • Total height = 800 mm
  • Standardisation: EN 131 and EN 2484
Shop equipment / Ladders Torso AMT04 8720028118465
€ 514.25 Incl. VAT https://schema.org/InStock
€ 514.25 514.25 EUR
Car retainer push clips kit 625 pcs + fastener remover [XP620ICA] Car retainer push clips kit 625 pcs + fastener remover
mm mm mm Kg

car plastic rivets / rivet kit auto/ fastener forming clip tool set / car door trims / car trim body clips kit / universal automotive retainers / bumper retainer clips / fasteners push retainer kit / auto push pin rivets set / door trim panel fender clips / car panel interior clips / door panel clips
Universal automotive retainer push clips kit from XPTools are widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, door trims, engine cover and splash shield retainers replacement. These body clips can also be used on cars, trucks, motorcycles, buses, caravans, etc.
625 pcs automotive clips and fasteners include 16 kinds of the most common sizes with holes ranging from 5mm to 10mm.
All fasteners push retainers packed in a compact size plastic container for easy organization and storage or carrying in the car. Compact size, convenient to store or carry within your car.
The kit includes a special removal tool, which will help you remove old clips and easily access hard-to-reach places.
This push type retainer set is made of high quality plastic material with solid construction to strengthen the fixation and effectively improve accuracy. 
Technical specifications:

  • Qty: 625 automotive fastener clips
  • Applicable: models universal
  • Material: PA (polyamide)
  • Colour: black

Total 16 different si zes auto clips:

  • 30pcs (10 mm) hole size head diameter: 20mm, stem length: 13mm;
  • 90pcs (6.25 mm) hole size head diameter: 15.2mm, stem length: 11mm;
  • 90pcs (6 mm) hole size head diameter: 15.2mm, stem length: 12mm;
  • 70pcs (7 mm) hole size head diameter: 13.8mm, stem length: 11.4mm;
  • 25pcs (8 mm) hole size head diameter: 16mm, stem length: 10mm;
  • 25pcs (9 mm) hole size head diameter: 15mm, stem length: 12mm;
  • 30pcs (6 mm) hole size head diameter: 15mm, stem length: 13.7mm;
  • 50pcs (6.2 mm) hole size head diameter: 13.8mm, stem length: 10mm;
  • 20pcs (9 mm) hole size head diameter: 18.2mm, stem length: 16mm;
  • 50pcs (5 mm) hole size head diameter: 18.2mm, stem length: 12mm;
  • 20pcs (7 mm) hole size head diameter: 20mm, stem length: 10.5mm;
  • 30pcs (8 mm) hole size head diameter: 19mm, stem length: 8.5mm;
  • 25pcs (8 mm) hole size head diameter: 20mm, stem length: 13mm;
  • 20pcs (7.8 mm) hole size head diameter: 20mm, stem length: 10mm;
  • 30pcs (9 mm) hole size head diameter: 19.7mm, stem length: 8.7mm;
  • 20pcs (9 mm) hole size head diameter: 17.7mm, stem length: 27.6mm.

Widely Used:
Fender Liner Retainer, Reinforced Panel Retainer, Retainer, Bumper Cover Retainer, Side Shield Retainer, Pkg Tray Trim Pin, Cowl Grille Rivet, Flare Retainer, Cowl Top Panel Rivet, Air Deflector Pin, Trunk Trim Fastener, Air Seal Clip, Shield Pin, Wheelhouse Liner Retainer, Rear Trim Panel Retainer, Air Shield Retainer, Carpet Trim Retainer, Lower Quarter Trim Retainer.
Pkg Tray Trim Retainer, Splash Shield Retainer, Wheelhouse Trim Retainer, Bumper Cover Nut, Side AirBag Retainer,Bumper Cover Retainer Clip, Closure Panel Retainer, Floor Duct Retainer, Header Panel Retainer, Latch Assembly Retainer, Trim Panel Clip, Lid Trim Retainer, Molding Retainer, Seal Retainer, Air Duct Pin, Splash Shield Rivet, Carpet Retainer, Servo Retainer, Silencer Retainer, Wheelhouse Cover Retainer, Front Trim Retainer, Rear Trim Retainer, Side Cover Retainer, Insulator Retainer, Center Panel Retainer, Tail Panel Trim Fastener, Closure Panel Pin, Licence Bracket Pin.

Shop equipment / Automotive / Automotive XPTools XP620ICA 8720028102198
€ 15.13 Incl. VAT https://schema.org/SoldOut
€ 15.13 15.13 EUR
No-spill spare pouring cap [NOSPILL01P] No-spill spare pouring cap
mm mm mm Kg

nozzle assembly / anti mess spout with automatic filling stop / automatic filling system for fuel / no spill filling system for car
The No-Spill gas can nozzle is made for ease of use. It stops flow automatically when the target tank reaches full capacity. The nozzle also includes an attached dust cover to keep your spout clean. The No-Spill nozzle automatically vents, reclaiming fumes while pouring
Note: This only fits No-Spill gas cans.

Technical specifications:

  • Material: HDPE
Shop equipment / Fluid distribution / No spill jerrycans NoSpill NOSPILL01P 8720028103706
€ 24.20 Incl. VAT https://schema.org/SoldOut
€ 24.20 24.2 EUR
Chain block 2 ton 10m [CB20C10] Chain block 2 ton 10m
mm mm mm Kg

chain hoist / chain block hoist / heavy duty chain block
These robust Torso chain hoists are ideal for lifting operations. Using the light chain its easy to lift vertically. The chain hoists are supplied with a heavy load chain and both hooks (below and above) are provided with a safety valve.

Technical specifications:

  • Capacity = 2 ton
  • Lifting height = 10m
  • Load chain length = 10m
  • Max. distance between hooks = 3.35m
  • Load chain = 10 x 30mm grade 80
  • Operating chain = 5 x 32mm
  • Operating chain length = 2 x 2.75m
Lifting and hoisting tools / Chain blocks Torso CB20C10 8720028105892
€ 272.25 Incl. VAT https://schema.org/InStock
€ 272.25 272.25 EUR
Chain block 1 ton 10m [CB10C10] Chain block 1 ton 10m
mm mm mm Kg

chain hoist / chain block hoist / heavy duty chain block
These robust Torso chain hoists are ideal for lifting operations. Using the light chain its easy to lift vertically. The chain hoists are supplied with a heavy load chain and both hooks (below and above) are provided with a safety valve.

Technical specifications:

  • Capacity = 1 ton
  • Lifting height = 10m
  • Load chain length = 10m
  • Max. distance between hooks = 3.35m
  • Load chain = 10 x 30mm grade 80
  • Operating chain = 5 x 32mm
  • Operating chain length = 2 x 2.75m
Lifting and hoisting tools / Chain blocks Torso CB10C10 8720028105885
€ 151.25 Incl. VAT https://schema.org/SoldOut
€ 151.25 151.25 EUR
LED Floodlight with Motion Sensor 10W 230V [LB10FP] LED Floodlight with Motion Sensor 10W 230V
mm mm mm Kg

LED floodlight with sensor / floodlight / floodlight PIR sensor / LED motion sensor
This Fluxon LED floodlight with a sensor from Fluxon for powerful illumination Ideal for illuminating shop windows, showrooms, buildings, grounds, but also for general outdoor lighting.
The 10W floodlight has a luminous flux of 800 lm at a 100 degree illumination angle, it emits a comfortable 4000K neutral bright white light, which is most popular for outdoor and indoor lighting.
This FLUXON LED floodlight contains built-in motion control PIR Sensor combined with a daylight sensor.
The built in PIR infrared sensor reacts on human bodys and switches on the light in a range of 15 mtrs.
The automatic daylight sensor makes sure the led light only turns on when required and there is no daylight detected. In this way the led light will only turn on in the evening or at night which will save power and prevent unnecessary burning hours during the day. Once the PIR sensor activates the light it will stay on for a preset time of 15 seconds.
With a handy foldable mounting bracket and cable including a European plug, you can easily install the floodlight and adjust the lighting angle to the spot you want to illuminate. The angle range of 0~180° is adjustable.

  • The features and advantages of this model:
  • include IP65 protection is suitable for outdoor application, reliable encapsulation, waterproof and dustproof,
  • white satin-frosted diffuser for uniform glare-free light,
  • frameless design, large light-emitting area,
  • environmentally friendly thickened aluminium,
  • 180°angled mounting bracket for easier and efficient installation,
  • new rolling technology, excellent overall performance,
  • high-tech spray technology, rustproof, anti-corrosion, with brushed,
  • silver surface treatment,
  • HD transparent tempered Glass Cover,
  • Thanks to ultra-slim design, the spotlight can be placed anywhere. 

What is in the box?

  • LED Floodlight
  • 1m cable H05RN-F 3G 1mm2 incl. plug

Technical specifications:

  • Power, W 10
  • LED SMD 283
  • Light output, lm 800
  • Correlated colour temperature (CCT), K 4000
  • Input 230V 50/60Hz
  • Lighting distance, max. 15 m
  • Burning time 15 sec
  • Detective angle 100°
  • Power Factor (PF) ≥0.7
  • Colour rendering index (CR) ≥80
  • Beam angle 100°
  • IP grade IP65
  • Material aluminium body / PC lens / tempered glass cover
  • Ambient temp (℃) -20°C/45°C
  • LED lifetime, h 30000
  • IK grade IK04
  • Chromaticity, SDCM <6
Electrical and accessories / Lighting / LED floodlight / LED flood lights with motion sensor Fluxon LB10FP 8720028103539
€ 18.15 Incl. VAT https://schema.org/InStock
€ 18.15 18.150000000000002 EUR
LED High-power floodlight 200W 230V [LB200W] LED High-power floodlight 200W 230V
mm mm mm Kg

LED floodlight / LED outdoor lighting / flood light outdoor / area lighting / waterproof lights / 
The Fluxon floodlight is ideal for lighting building areas, parking lots, car dealerships, roadways, walkways, pedestrian pathways, showrooms, grounds and security lighting, but also for general outdoor lighting.
Fluxon LED floodlights are equipped with the latest LEDs that guarantee the quality of the floodlights with a lifespan of 30000 burning hours .
The 200W LED outdoor lighting fixture is rated at 18000 lm of neutral slightly warm white 4000K, which can help you save over 70% energy. Thanks to the satin frosted diffuser and 120 beam angle it ensures no shadows or glare and gives better use experience.
Heavy-duty, cast-aluminium housing with an IP65 rating, making the floodlight suitable for applications in an outdoor environment. No matter how hard the weather is, the Fluxon LED floodlight can handle it.
With a handy foldable mounting bracket and cable including a European plug, you can easily install the floodlight and adjust the lighting angle to the spot you want to illuminate. The angle range of 0~180° is adjustable.

The features and advantages of this model:

  • include IP65 protection is suitable for outdoor application, reliable encapsulation, waterproof and dustproof,
  • white satin-frosted diffuser for uniform glare-free light,
  • frameless design, large light-emitting area,
  • environmentally friendly thickened aluminium,
  • 180°angled mounting bracket for easier and efficient installation,
  • new rolling technology, excellent overall performance,
  • high-tech spray technology, rustproof, anti-corrosion, with brushed,
  • silver surface treatment,
  • HD transparent tempered Glass Cover. 

What is in the box?

  • LED Floodlight
  • installed 1mtr cable H05RN-F 3G 1mm2 incl. EU molded plug

Technical specifications:

  • Power, W 200
  • LED SMD 2835
  • Light output, lm 18000
  • Correlated color temperature (CCT), K 4000
  • Input 230V 50/60Hz
  • Power Factor (PF) ≥0.9
  • Colour rendering index (CR) ≥80
  • Beam angle 120°
  • IP grade IP65
  • Material aluminium body / tempered optical glass cover
  • Ambient temp (℃) -20°C/45°C
Electrical and accessories / Lighting / LED floodlight / LED flood lights 230V Fluxon LB200W 8720028103584
€ 90.75 Incl. VAT https://schema.org/InStock
€ 90.75 90.75 EUR
LED Floodlight 30W 230V [LB30F] LED Floodlight 30W 230V
mm mm mm Kg

flood light outdoor / area lighting / waterproof lights / LED floodlight / LED outdoor lighting

The Fluxon flood light delivers exceptional performance in a Ultra Slim Design with high lumen and wide optical distribution. The LED is ideal for lighting building areas, parking lots, car dealerships, roadways, walkways, pedestrian pathways, and security lighting. Thanks to its unique design it matches the home exterior very easily and does not take a lot of space to be installed.
The 30W floodlight has a luminous flux of 2400 lm at a 100 degree illumination angle, it emits a comfortable 4000K neutral bright white light, which is most popular for outdoor and indoor lighting.
With a handy foldable mounting bracket and cable including a European plug, you can easily install the floodlight and adjust the lighting angle to the spot you want to illuminate. The angle range of 0~180° is adjustable.
The features and advantages of this model:

  • include IP65 protection is suitable for outdoor application, reliable encapsulation, waterproof and dustproof,
  • white satin-frosted diffuser for uniform glare-free light,
  • frameless design, large light-emitting area,
  • environmentally friendly thickened aluminium,
  • 180°angled mounting bracket for easier and efficient installation,
  • new rolling technology, excellent overall performance,
  • high-tech spray technology, rustproof, anti-corrosion, with brushed,
  • silver surface treatment,
  • HD transparent tempered Glass Cover,
  • thanks to ultra-slim design, the spotlight can be placed anywhere.

What is in the box?

  • LED Floodlight
  • 1m cable H05RN-F 3G 1mm2 incl. plug

Technical specifications:

  • Power, W 10
  • LED SMD 2835
  • Light output, lm 800
  • Correlated colour temperature (CCT), K 4000
  • Input 230V 50/60Hz
  • Power Factor (PF) ≥0.9
  • Colour rendering index (CR) ≥80
  • Beam angle 100°
  • IP grade IP65
  • Material aluminium body / tempered optical glass cover
  • Ambient temp (℃) -20°C/45°C
  • LED lifetime, h 30000
  • IK grade IK04
  • Chromaticity, SDCM <6
Electrical and accessories / Lighting / LED floodlight / LED flood lights 230V Fluxon LB30F 8720028103515
€ 18.15 Incl. VAT https://schema.org/InStock
€ 18.15 18.150000000000002 EUR
LED Floodlight 20W 230V [LB20F] LED Floodlight 20W 230V
mm mm mm Kg

flood light outdoor / area lighting / waterproof lights / LED floodlight / LED outdoor lighting

The Fluxon flood light delivers exceptional performance in a Ultra Slim Design with high lumen and wide optical distribution. The LED is ideal for lighting building areas, parking lots, car dealerships, roadways, walkways, pedestrian pathways, and security lighting. Thanks to its unique design it matches the home exterior very easily and does not take a lot of space to be installed.
The 20W floodlight has a luminous flux of 1600 lm at a 100 degree illumination angle, it emits a comfortable 4000K neutral bright white light, which is most popular for outdoor and indoor lighting.
With a handy foldable mounting bracket and cable including a European plug, you can easily install the floodlight and adjust the lighting angle to the spot you want to illuminate. The angle range of 0~180° is adjustable.
The features and advantages of this model:

  • include IP65 protection is suitable for outdoor application, reliable encapsulation, waterproof and dustproof,
  • white satin-frosted diffuser for uniform glare-free light,
  • frameless design, large light-emitting area,
  • environmentally friendly thickened aluminium,
  • 180°angled mounting bracket for easier and efficient installation,
  • new rolling technology, excellent overall performance,
  • high-tech spray technology, rustproof, anti-corrosion, with brushed,
  • silver surface treatment,
  • HD transparent tempered Glass Cover,
  • thanks to ultra-slim design, the spotlight can be placed anywhere.

What is in the box?

  • LED Floodlight
  • 1m cable H05RN-F 3G 1mm2 incl. plug

Technical specifications:

  • Power, W 20
  • LED SMD 2835
  • Light output, lm  1600
  • Correlated colour temperature (CCT), K 4000
  • Input 230V 50/60Hz
  • Power Factor (PF) ≥0.9
  • Colour rendering index (CR) ≥80
  • Beam angle 100°
  • IP grade IP65
  • Material aluminium body / tempered optical glass cover
  • Ambient temp (℃) -20°C/45°C
  • LED lifetime, h 30000
  • IK grade IK04
  • Chromaticity, SDCM <6
Electrical and accessories / Lighting / LED floodlight / LED flood lights 230V Fluxon LB20F 8720028103508
€ 14.52 Incl. VAT https://schema.org/InStock
€ 14.52 14.52 EUR
LED Floodlight 10W 230V [LB10F] LED Floodlight 10W 230V
mm mm mm Kg

flood light outdoor / area lighting / waterproof lights / LED floodlight / LED outdoor lighting

The Fluxon flood light delivers exceptional performance in a Ultra Slim Design with high lumen and wide optical distribution. The LED is ideal for lighting building areas, parking lots, car dealerships, roadways, walkways, pedestrian pathways, and security lighting. Thanks to its unique design it matches the home exterior very easily and does not take a lot of space to be installed.
The 10W floodlight has a luminous flux of 800 lm at a 100 degree illumination angle, it emits a comfortable 4000K neutral bright white light, which is most popular for outdoor and indoor lighting.
With a handy foldable mounting bracket and cable including a European plug, you can easily install the floodlight and adjust the lighting angle to the spot you want to illuminate. The angle range of 0~180° is adjustable.
The features and advantages of this model:

  • include IP65 protection is suitable for outdoor application, reliable encapsulation, waterproof and dustproof,
  • white satin-frosted diffuser for uniform glare-free light,
  • frameless design, large light-emitting area,
  • environmentally friendly thickened aluminium,
  • 180°angled mounting bracket for easier and efficient installation,
  • new rolling technology, excellent overall performance,
  • high-tech spray technology, rustproof, anti-corrosion, with brushed,
  • silver surface treatment,
  • HD transparent tempered Glass Cover,
  • thanks to ultra-slim design, the spotlight can be placed anywhere.

What is in the box?

  • LED Floodlight
  • 1m cable H05RN-F 3G 1mm2 incl. plug

Technical specifications:

  • Power, W 10
  • LED SMD 2835
  • Light output, lm 800
  • Correlated colour temperature (CCT), K 4000
  • Input 230V 50/60Hz
  • Power Factor (PF) ≥0.9
  • Colour rendering index (CR) ≥80
  • Beam angle 100°
  • IP grade IP65
  • Material aluminium body / tempered optical glass cover
  • Ambient temp (℃) -20°C/45°C
  • LED lifetime, h 30000
  • IK grade IK04
  • Chromaticity, SDCM <6
Electrical and accessories / Lighting / LED floodlight / LED flood lights 230V Fluxon LB10F 8720028103492
€ 12.10 Incl. VAT https://schema.org/InStock
€ 12.10 12.1 EUR