Absaugschlauch

- diameter = 102mm
- material thickness = 0,4mm
- flexible
- with copper

price per meter

Absaugschlauch

- diameter = 127mm
- material thickness = 0,4mm
- flexible
- with copper

price per meter

Air blow gun

This professional air blow gun is equipped with a patented Y-seal ring for guaranteed greater airflow and longer life.

- fully-flow air flow rate of 500L/min
- variable pressure control
- safety nozzle complies with OSHA standard
- material = POM
- including euro coupler
- max. working pressure = 16 bar (232 psi)
- sound peak = 90dB
- connection = 1/4" NPT inner thread messing

Air blow gun

This professional air blow gun is equipped with a patented Y-seal ring for guaranteed greater airflow and longer life.

- fully-flow air flow rate of 500L/min
- variable pressure control
- safety nozzle complies with OSHA standard
- material = POM
- including euro coupler
- max. working pressure = 16 bar (232 psi)
- sound peak = 90dB
- connection = 1/4" NPT inner thread messing

Air belt sander

Easy belt replacement. Suitable for jobs in broad spaces. Helps you to do fine sanding jobs like wood-working, furniture-polishing, plastic, aluminum and metal-polishing and even small spot sanding jobs like trims, curves and other difficult to reach spots.

- free speed = 16.000rpm
- sanding belt = 20x520mm
- air inlet = 1/4"
- air hose = 3/8"
- avg. air consumption = 7 SCFM / 198 L/min
- working pressure = 6,3 bar

Air belt sander long type

The smallest Handy belt sander with 10mm wide belt, but with extra length of 600mm. Lever throttle for featuring control.
Easy belt replacement. Suitable for jobs in narrow spaces and recessed corners.
Helps you to do fine sanding jobs like wood-working, furniture-polishing, plastic, aluminium&metal-polishing, and even small
spot sanding jobs like trims, curves, and other diffucult-to-reach spots for common sanding machines.
3 different grit sanding belts (60, 80,120 grit) included for different stage of sanding.
Rear exhaust.

- free speed = 16000rpm
- sanding Belt = 10x600mm
- air inlet = 1/4"
- air hose = 3/8"
- avg. air consumption = 6 SCFM / 170 L/min
- working pressure = 6,3 bar

Air belt sander

Suitable for jobs in narrow spaces and recessed corners.

- free speed = 16,000rpm
- sanding belt = 10 x 330mm
- air inlet = 1/4''
- hose inlet 3/8''
- avg. air consumption = 6 SCFM / 170L/min
- working pressure = 6,3 bar

Loose sanding belt available in 60grit, 80grit and 120 grit

Professional air blow gun set with various handy attachments.
Thanks to the supplied rubber attachments, it is possible to apply compressed air to almost any system.
A star tip is also supplied which broadens the airflow and ensures maximum flow, ideal for cleaning tools and machines.

• variable pressure control

• material = ABS plastic

• including euro connector

• max. working pressure = 16 bar

• inlet = 1/4" BSP internal thread bress

Brush for blasting gun of SK28V

Suitable for the blasting gun of the portable sand blaster with vacuum system.

Druck Schalter 4-Wege 12 bar

- 9 - 12,5 kgf/cm3

- 120V / 240V

- 26A

- 1/4" connection

Air nibbler pull type

Lightweight aluminum housing with soft grip.
Cuts up to 1,5mm steel without leaving burr or deformed edges.
Adjustable die can be placed in various cutting positions to suit applications.

- steel capacity = 1,5mm
- sprokes per minute = 3800spm
- average air consumption = 9,8 SCFM / 275 L/min
- air pressure = 6,3 bar
- air inlet = 1/4''
- hose inlet = 3/8''

Druckluft Blechschere

Specially designed head cutter makes both straight and contour cuts with a minimum of edge distortion.

Shears most types of plastics and all types of aluminum, tin and steel up to 18 gauge (1,2mm).

- steel = 1,2mm

- strokes per minute = 3200spm

- air inlet = 1/4"

- air hose = 3/8"

- avg. air consumption = 4 SCFM / 113 L/min

- working pressure = 6,3 bar

This ZionAir pneumatic drill can be used both left and right, has a 13mm quick-release head and is very suitable for all kinds of jobs.

Specifications:

• max. drill head diameter = 10mm

• direction of rotation = left / right

• free speed = 1800rpm

• average air consumption = 113L/min

• air inlet = 1/4" (male connector included)

• working pressure = 6,3bar

The specified air consumption is indicated at a pressure of 6,3 bar.
The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.
If you need advise, consult one of our experts.

This ZionAir pneumatic hammer is suitable for all kinds of chopping and breaking jobs. The air hammer is not only supplied with a traditional spring holder but also with a new quick-change head! This makes it easy to switch the chisels quickly.
Furthermore, the air chisel has a hexagon drive so that the chisel remains firmly centered in position.

• robust air hammer

• pointed chisel

• flat chisel curved

• flat chisel straight

• flat chisel with small angle

• flat chisel with large angle

• spring

• male connector 1/4" thread

Specifications:

• drill hole diameter = 19mm

• drive chisels = hex

• stroke = 102mm
  

• strokes per minute = 2000spm

• average air consumption = 85L/min

• air inlet = 1/4" (male connector included)

• working pressure = 6,3 bar

The specified air consumption is indicated at a pressure of 6,3 bar.
The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.
If you need advise, consult one of our experts.

Air chisel
This ZionAir pneumatic chisel is ideal for smaller demolition jobs such as tiles and masonry. The chisel lies comfortably in the hand thanks to the ergonomic handle. The set consists of an air chisel, a spring holder and 5 matching chisels. Changing the chisels can be done quickly and easily.

Technical specifications:

• free speed = 3000rpm

• diameter bore hole = 15mm

• length chisels = 170mm

• diameter chisels = 15mm

• diameter shank chisels = 11mm

• average air consumption = 80L/min

• air inlet = 1/4" (male connector included)

• working pressure = 6,3 bar

• recommended air hose = 10mm inside diameter (3/8")

Druckluft-Nadelentroster

Dieser Druckluft-Nadelentroster von ZionAir ist ideal zum Beseitigen von Rost, Rückständen und Schmutzflecken auf unebenen Oberflächen von Maschinen und dergleichen. Aufgrund seines kompakten und ergonomischen Designs gelangt der Nadelentroster leicht an schwer zugängliche Stellen.

Technische Daten:

• Hub = 32mm

• Nadelanzahl = 12

• Nadeldurchmesser = 3mm

• freie Drehzahl = 4000 U/min

• durchschnittlicher Luftverbrauch = 122 L/min

• Lufteinlass = 1/4" (inklusive Netzstecker)

• Arbeitsdruck = 6,3 bar

Der vorgeschriebene Druckluftbedarf beträgt 6,3 bar.

Die Luftleistung an Kompressoren wird bei Umgebungsdruck gemessen, sodass diese beiden Werte nicht miteinander verglichen werden können.

Wenn Sie Hilfe benötigen, wenden Sie sich an einen unserer Experten.

This ZionAir needle scaler on air is ideal for erasing rust, residue and dirty spots on uneven surfaces of machinery and such.

Specifications:

• stroke = 67mm

• needle diameter = 3mm

• number of needles = 19

• strokes per minute = 5000spm

• average air consumption = 113L/min

• air inlet = 1/4" (male connector included)

• working pressure = 6,3 bar

The specified air consumption is indicated at a pressure of 6,3 bar.
The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.
If you need advise, consult one of our experts.

Air riveter

Hydraulic piston for increased power.
Ultra high speed, ideal for assembly line.
Sets rivets up to 1/4" (6mm) steel and 4,8mm stainless steel.
Easy operation in any position with one hand.

- capacity = 3.2, 4.0, 4.8, 6,0mm
- stroke length = 14mm
- air inlet = 1/4"
- air hose = 3/8"
- avg. air consumption = 0,03 SCFM / 0,85 L/min
- working pressure = 6,3 bar
- length x height = 225 x 93mm
- weight = 1,66kgs

This ZionAir tire buffer on air is suitable for rubber work and roughening of tires.
The machine has a variable speed that can be operated with the handle.

Specifications:

• diameter rough wheel = 55mm

• free speed = 2500rpm

• average air consumption = 113L/min

• air inlet = 1/4" (male connector included)

• operating pressure = 6,3 bar

The specified air consumption is indicated at a pressure of 6,3 bar.
The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.
If you need advise, consult one of our experts.