Nail shooter and staple gun

This ZionAir handy and safe 2 in 1 nailer and staple gun is ideal for securing thin wooden plates, for example. Thanks to the quick closure on the magazine, nails and staples are easy to load and switching between staples and nails is no problem during work. The gun is also equipped with a so-called sequential trigger. This ensures accurate fastening and extra security. Involuntary shooting is therefore not possible.

Technical specifications:

• capacity staples = 100

• capacity nails = 100

• length of the staples = 16 - 40mm

• length of the nails = 15 - 50mm

• average air consumption = 25,5L/min

• air inlet = 1/4" (male connector included)

• working pressure = 6,3 bar

• recommended air hose = 10mm inside diameter (3/8")
  

The specified air consumption is indicated at a pressure of 6,3 bar.

The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.

If you need advise, consult one of our experts.

Abrasive / glass grit

Shardblast blasting grit is a very effective abrasive for various applications. For example, the abrasive is ideal for removing layers of paint on wood, thick layers of paint and rust on steel, cleaning stone and facade cleaning.

Since the abrasive consists of recycled glass that is completely clean after an intensive treatment, it can be used as a blasting grit, it is very environmentally friendly and has a low cost price. The product is also reusable.

Shardblast can be used in both blast cabinets and mobile blasters.

Technical specifications:

• grain size = small: 0.2 - 0.5mm

• content = 20kg

Abrasive speedblast garnet

Garnet is a recyclable and universally applicable abrasive. It is used especially for removing rust, paint and mill scale and for facade cleaning.

Specifications:
- grit size = 30 - 60 (0,2 - 0,6mm)
- grit shape = angular
- packed in a 25kg bag

Angle die grinder

This grinder has a black anodized angle head and a lever block trigger for safety. The tool is ideal for light grinding, removing rust and smoothing welds.

- free speed = 15.000rpm
- grinding wheel = 65mm
- avg. air consumption = 3,5 SCFM / 99 L/min
- working pressure = 6,3 bar
- air inlet = 1/4''
- air hose = 3/8''

Including grinding wheel 50mm

Air angle grinder 5"

Ideal for editing of metal, rocks or wood.
Built-in regulator adjusts speed for various applications.
The side handle ensures greater comfort and control.

- free speed = 11,000rpm
- grinding wheel = 5"
- air inlet = 1/4"
- air hose = 3/8"
- avg. air consumption = 5 SCFM / 141 L/min
- working pressure = 6,3 bar
- length x height = 225 x 140
- weight = 1,67kg

Air angle sander with velcro backing pad

Suitable for light sanding, removing rust and smoothing welds.

- free speed = 15.000rpm
- grinding wheel = 2'' / 50mm
- avg. air consumption = 3,5 SFCM / 99 L/min
- working pressure = 6,3 bar
- air inlet = 1/4''
- air hose = 3/8''

Air belt sander

Suitable for jobs in narrow spaces and recessed corners.

- free speed = 16,000rpm
- sanding belt = 10 x 330mm
- air inlet = 1/4''
- hose inlet 3/8''
- avg. air consumption = 6 SCFM / 170L/min
- working pressure = 6,3 bar

Loose sanding belt available in 60grit, 80grit and 120 grit

Air belt sander

Easy belt replacement. Suitable for jobs in broad spaces. Helps you to do fine sanding jobs like wood-working, furniture-polishing, plastic, aluminum and metal-polishing and even small spot sanding jobs like trims, curves and other difficult to reach spots.

- free speed = 16.000rpm
- sanding belt = 20x520mm
- air inlet = 1/4"
- air hose = 3/8"
- avg. air consumption = 7 SCFM / 198 L/min
- working pressure = 6,3 bar

Air belt sander long type

The smallest Handy belt sander with 10mm wide belt, but with extra length of 600mm. Lever throttle for featuring control.
Easy belt replacement. Suitable for jobs in narrow spaces and recessed corners.
Helps you to do fine sanding jobs like wood-working, furniture-polishing, plastic, aluminium&metal-polishing, and even small
spot sanding jobs like trims, curves, and other diffucult-to-reach spots for common sanding machines.
3 different grit sanding belts (60, 80,120 grit) included for different stage of sanding.
Rear exhaust.

- free speed = 16000rpm
- sanding Belt = 10x600mm
- air inlet = 1/4"
- air hose = 3/8"
- avg. air consumption = 6 SCFM / 170 L/min
- working pressure = 6,3 bar

Air blow gun

This professional air blow gun is equipped with a patented Y-seal ring for guaranteed greater airflow and longer life.

- fully-flow air flow rate of 500L/min
- variable pressure control
- safety nozzle complies with OSHA standard
- material = POM
- including euro coupler
- max. working pressure = 16 bar (232 psi)
- sound peak = 90dB
- connection = 1/4" NPT inner thread messing

Air blow gun

This professional air blow gun is equipped with a patented Y-seal ring for guaranteed greater airflow and longer life.

- fully-flow air flow rate of 500L/min
- variable pressure control
- safety nozzle complies with OSHA standard
- material = POM
- including euro coupler
- max. working pressure = 16 bar (232 psi)
- sound peak = 90dB
- connection = 1/4" NPT inner thread messing

Professional air blow gun set with various handy attachments.
Thanks to the supplied rubber attachments, it is possible to apply compressed air to almost any system.
A star tip is also supplied which broadens the airflow and ensures maximum flow, ideal for cleaning tools and machines.

• variable pressure control

• material = ABS plastic

• including euro connector

• max. working pressure = 16 bar

• inlet = 1/4" BSP internal thread bress

Refrigeration dryer

This ZoinAir professional air dryer is very suitable for drying compressed air for industrial use.
Nowadays, not only the production of a certain amount of compressed air is important, but also the purity of the air. The ZionAir refrigeration dryers offer the right solution for removing condensate for greater efficiency.
Important advantages are:
- longer life span of the equipment due to less wear
- greater productivity and lower maintenance costs thanks to less breakdowns

Technical specifications:
- max. pressure = 16bar
- refrigerant = R134A
- flow rate = 60m3/h / 1000L/min
- power = 190W
- power supply = 230V / 50Hz
- air connections = 3/4'' M gas thread/din
- connecting couplers = 1/2" M gas thread/din
- automatic condensation seperator
- the specified flow rate is realized at an ambient temperature of 25°C and an inlet air temperature of 35°C

Refrigeration dryer

This ZoinAir professional air dryer is very suitable for drying compressed air for industrial use.
Nowadays, not only the production of a certain amount of compressed air is important, but also the purity of the air. The ZionAir refrigeration dryers offer the right solution for removing condensate for greater efficiency.
Important advantages are:
- longer life span of the equipment due to less wear
- greater productivity and lower maintenance costs thanks to less breakdowns

Technical specifications:
- max. pressure = 16bar
- refrigerant = R134A
- flow rate = 85m3/h / 1450L/min
- power = 266W
- power supply = 230V / 50Hz
- air connections = 3/4'' M gas thread/din
- connecting couplers = 1/2" M gas thread/din
- automatic condensation seperator
- the specified flow rate is realized at an ambient temperature of 25°C and an inlet air temperature of 35°C

Refrigeration dryer

This ZoinAir professional air dryer is very suitable for drying compressed air for industrial use.
Nowadays, not only the production of a certain amount of compressed air is important, but also the purity of the air. The ZionAir refrigeration dryers offer the right solution for removing condensate for greater efficiency.
Important advantages are:
- longer life span of the equipment due to less wear
- greater productivity and lower maintenance costs thanks to less breakdowns

Technical specifications:
- max. pressure = 16bar
- refrigerant = R134A
- flow rate = 20m3/h / 350L/min
- power = 130W
- power supply = 230V / 50Hz
- air connections = 3/4'' M gas thread/din
- connecting couplers = 1/2" M gas thread/din
- automatic condensation seperator
- the specified flow rate is realized at an ambient temperature of 25°C and an inlet air temperature of 35°C

Refrigeration dryer

This ZoinAir professional air dryer is very suitable for drying compressed air for industrial use.
Nowadays, not only the production of a certain amount of compressed air is important, but also the purity of the air. The ZionAir refrigeration dryers offer the right solution for removing condensate for greater efficiency.
Important advantages are:
- longer life span of the equipment due to less wear
- greater productivity and lower maintenance costs thanks to less breakdowns

Technical specifications:
- max. pressure = 16bar
- refrigerant = R134A
- flow rate = 45m3/h / 750L/min
- power = 164W
- power supply = 230V / 50Hz
- air connections = 3/4'' M gas thread/din
- connecting couplers = 1/2" M gas thread/din
- automatic condensation seperator
- the specified flow rate is realized at an ambient temperature of 25°C and an inlet air temperature of 35°C

Air filter element

Suitable for the silent compressors CP40S8, CP40S12, CP55S8, CP55S12, CP75S8 and CP75S12.

Air filter

Suitable for the compressors CP122T03 and CP22VT05.