Druckluftschlauch

Blubird air hoses are the lightest and strongest of the rubber air hoses. The hoses are very flexible in extreme weather conditions of -45 to 87 degrees celsius.

Price per meter

Features:

• ultra light, super strong rubber

• ozone resistant: provides protection from extreme weather, abrasions and kinks

• polyester braided reinforcement

• oil resistant: resists grease, oil and diesel

• without coupling or thread

Specifications:

• inner diameter hose = 6mm

• outside diameter hose = 13mm

• per meter

• max. working pressure = 20bar (300psi)

• min./max. temperature = -45 to 87 degrees celsius (-50 to 190 degrees fahrenheit)

Zugbolzen

• Gewindegröße = 

• geeignet für die runde Blechlocher = 16mm / 20mm / 22mm / 22,5mm / 25mm / 26,2mm / 27,5mm

Stop Relay

Werkbankhaken / Werkzeughaken

Dieser Werkzeughaken ist ideal zum organisierten Aufhängen von Werkzeugen, zur Verwendung mit folgenden Werkzeugwänden der Expert-Serie und Werkbänken:

• BG62BP
• BG62BPS
• BG75BP
• WBG01
• WBG02
• WBG03

Schleifscheibe 150mm P120 Klettband mit Löcher 5Tlg

Schruppscheibe KSM

Provided with a special top layer.
Hard, preferably for edge-grinding, or soft, for surface treatment.
High stock removal.

- diameter = 125mm
- thickness = 7,0mm
- bore = 22,23mm
- V27

Reifenmontagepaste Schwarz 5L

Viersäulenlift / Servicelift / Autolift / Vier Stempelhebebühne

Cascos car lifts are from 100% European production. Cascos has more than 50 years of experience in vehicle lifts, which results in a very reliable and extremely strong end product.
At Cascos lifts, three key words are central, namely: Reliability, functionality and safety.

The robust construction of the lifts and the high quality of the components ensure high reliabilty and low maintenance costs.
With a very low minimum ramp height and a maximum lifting height of 2000mm, these lifts are very versatile and suitable for cars, buses and 4x4 vehicles.
The lifts are equipped with a safety indicator and have both a mechanical and a pneumatic protection.

Furthermore, the Cascos four pole lifts have a number of very thoughtful features:

• Double T-profiles: Runways reinforced with double T-welded steel beams. These are virtually impossible to deform, withstand the load better over time and ensure that the runway is perfectly flat, ideal for very precise work.

• Extra safety: Cascos gives priority to safety above all and has developed a double safety system for all columns, namely:
  Mechanical safety: by means of a safety bar.
  Pneumatic safety: by means of safety ladders.

• Leveling alarm: Cascos lifts have an indicator light that warns if the runways are poorly leveled and ensures that the cylinder works in perfect conditions, which ensures a longer service life.

• Hydraulic cylinders: One by one produced and tested in the factory.

• Convenience and efficiency:
  Manual lowering valves to lower the lift in event of a power failure or malfunction.
  Adjustable lifting timer that can speed up the lowering, depending on the load volume.

• Thermal protection: Electric motors have thermal protection against overheating.

• For Cascos four post lifts, less installation space is required and a larger working surface is available, which makes the lift unique in its kind.

This alignment model four column lift has a capacity of 4 tons and has the following features:

• Long alignment runways of 4,8 meters long and 630mm wide.

• A drive width / distance between the columns of no less than 3 meters. This makes the lift very suitable for alignment and ensures an ideal working space at the vehicle.

• Wide runways of 630mm, suitable for working with wider tires.

• With a minimum ramp height of only 180mm, this lift is the lowest alignment lift on the market. Due to the low ramp height the ramps are shorter, making the lift suitable for low vehicles, such as sports cars.

Specifications:

• capacity = 4000kg

• voltage = 230-400V / 3 phase

• motor power = 3kW

• minimum drive height = 180mm

• maximum lifting height = 2000mm

• length of the runways = 4800mm

• width of the runways = 630mm

• distance between the runways = 740 - 990mm

• drive width / distance between the columns = 3000mm

• height of the columns = 2410mm

• lifting time = 40 seconds

• electro-hydraulic

Note: The price for this lift does not include the delivery and placement of the lift. Extended guarantees only apply in combination with a Spoods installation / mainenance contract. For more information, contact one of our employees.
The presence of a forklift truck is necessary to unload the lift!

This window is suitable for the sand blasting cabinets SB11A, SB19A, SB22A, SB22AB, SB35A, SB42A en SB42AB.

Note: This is only the frame and not the window!

Haken für Winde

- total length = 100mm
- thickness pin = 9,5mm

Not for lifting!

Hydraulik Handpumpe / Hydrauliekpumpe

Hydraulic operated pump to drive crimping head, cutting heads and punching head. Including 2M high pressure hose and couple plug.

- max. output pressure: low pressure = 20 bar / 2MPa
high pressure = 700 bar / 70MPa
- output of the oil: low pressure = 13cc / 13ml
high pressure = 2.3cc / 2.3ml
- capacity of the oil = 2000ml

Elektrode Plasmabrenner

Geeignet für den Plasmabrenner PL141.

• 80 - 100A

• Preis pro Stück

Haken für Winde

- total length = 130mm
- thickness pin = 7mm
- capacity = 9 ton

Not for lifting!

Selbstzentrierende 3-backen Drehfutter

The metal workpiece is clamped using this chuck. The chuck is self-centering, so the claws are tightened all three at the same time. It is important that the material has a round, triangular or hexagonal profile.

• diameter = 160mm

• cylindrical fitting edge

• comes with inside and outside set of claws

Arbeitsplatte Massivholz

• dimensions = 2041 x 463 x 38mm

This worktop can be mounted on at least 2 of the following cabinets: GC68L7, GC68L5, GC68D2 and GC68TB. Space can be left between the two bottom cabinets for the GC68SC mobile tool cabinet.

This worktop is also part of workshop module 3 and 4, but is also available separately

Hydraulikzylinder

It has the characteristic of a low collapsed height. If the requirement of stroke needs to be higher, the ZFL cylinders are recommended.
The surface of principle axis is finished with chrome plate.
Plunger has the function of retracting automatically.

• output = 50 ton

• stroke = 50mm

• effective area = 56,7cm^2

• oil capacity = 0,354 L

• height of product = 104mm

• extended height = 154mm

• outside diameter = 128mm

• bore diameter = 95mm

• plunger diameter = 65mm

• thread for input oil port (ZG) = 3/8" - 19

• saddle protrusion form plgr = 2mm

• saddle is removable

• max. pressure = 700bar

Schweißstab TIG

This INE TIG Stainless welding wire is suitable for connecting equal and unequally types of stainless steel. It is a stainless steel TIG welding wire in accordance with AWS E316L-Si. This welding wire is suitable for applications where a high degree of corrosion resistance is desired.

- brand = INE

- thickness = 2,4mm

- TIG 316LSi

- suitable for = stainless steel

- lengte = 1 meter

- weight = 5kg

Standards:

AWS A 5.9: ER316LSi

EN ISO 14343-A W 19 12 3 LSi

This Fluxon very extensive power distributor can easily be mounted on the wall and is ideal for using in workshop and garages.

Input:

• CEE plug 63A / 5-pole / 400V

Output:

• 3x CEE socket 16A / 5-pole / 400V

• 3x CEE socket 32A / 5-pole / 400V

• 1x CEE socket 63A / 5-pole / 400V

• 8x socket (DIN49440) 16A / 230V

Klimaservicegerät / Diagnosestation / Servicegerät / Klimatankstelle / Kfz-Klimaservicestation

Compact, economic, and modern model ACVA500HFO from Ecotechnics is a solid and very user-friendly air conditioning filling station which is suitable for HFO refrigerants.
The operation of the service unit allows you to completely avoid the typical "emissions" (dispersion) of refrigerant gas into the environment, which is released at the end of a normal refueling of the car's cooling system, when the charging hoses are removed from this system.
The machine recovers almost 100% of the refrigerant and checks the air conditioning system for leaks. Diagnosis station equipment automatic leak testing system: check for leaks during the vacuum phase. If leaks are found, it interrupts operation and gives an alarm.
Air conditioning filling station equipped with hermetic cartridges offer the advantage of eliminating contact between the humidity naturally present in ambient air and the oil or dye, which are hydroscopic substances (that is, substances that easily absorb humidity).
Oil management both with standard refillable containers and with hermetic cartridges.
The machine has a fully automatic mode and can be put into manual mode in cases of diagnosis, where each phase can be performed one by one.
Thanks to its extremely compact size, the ACVA500 HFO is very suitable for use in mobile workshops, work buses etc.
The machine is equipped with:

• Freon charging transfer kit
• 3m hose package with quick couplings
• Integrated Data Base Car-Truck-Agri
• Integrated vacuum pump 51 lt/min
• Thermal Printer for a complete detailed report.

Features:

• Fully automatic service
• Electronic oil scale
• il type change function
• Refillable standard containers for oil and dye
• Automatic Leak Testing
• Energy-saving with 12-volt solenoid valve technology
• C.A.R.Method
• Ventilated
• Refillable standard containers
• Made in Italy

Technical specifications:

• Voltage = 220-240V 50/60 Hz
• Type of refrigerant = HFO1234YF
• Service valves = Manual
• Non condensable gas purge = Manual
• Hoses = 3 m
• Capacity vacuum pump = 51 L/min
• Vacuum level = 0.2 Mbar
• Sealed compressor = 1/3 HP
• Recovery speed = 300 g/min in liquid phase
• Tank Scale resolution = 10 g
• Working temperature range = 11/49°C
• Filter system = 1 filter for humidity
• Refrigerant tank = 12 liters refillable