Nadelentroster / Luftmeißel
Dieses ZionAir Nadelentroster- und Luftmeißelset kann für unterschiedlichste Arbeiten verwendet werden. Das Gerät besteht aus einem Nadelentroster und einem Luftmeißel. Dadurch eignet es sich u. a. für die Entfernung von Schweißschlacke, Farbe und Rost.
Es ist einfach, zwischen Nadelentroster und Meißel zu wechseln. Das Set ist außerdem mit einem Schnellwechselkopf für die Meißel, einem ergonomischen Griff zur Bedienung des Geräts mit zwei Händen und einem praktischen Aufbewahrungskoffer ausgestattet.
Der Nadelentroster hat 19 Nadeln und der Meißel 5 verschiedene Meißelköpfe.
Technische Spezifikationen:
Hub = 67mm
freie Drehzahl = 2200 U/min
durchschnittlicher Luftverbrauch = 85 L/min
Anzahl der Nadeln = 19
Durchmesser der Nadeln = 3mm
Anzahl der Meißel = 5
Verbindung Meißel = Sechskant
Lufteinlass = 1/4" (inklusive Netzstecker)
Arbeitsdruck = 6,3 bar
empfohlener Luftschlauch = 10mm Innendurchmesser (3/8")
Der vorgeschriebene Druckluftbedarf beträgt 6,3 bar.
Die Luftleistung an Kompressoren wird bei Umgebungsdruck gemessen, sodass diese beiden Werte nicht miteinander verglichen werden können.
Wenn Sie Beratung benötigen, wenden Sie sich an einen unserer Experten.
Nadelentroster / Luftmeißel / Lufthammer
Diese pneumatische 3-in-1-Kombimaschine von ZionAir ist sehr vielseitig und kann für unterschiedlichste Arbeiten eingesetzt werden. Das Gerät besteht aus einem Nadelentroster, einem Luftmeißel und einem Lufthammer. Dadurch eignet es sich u. a. für die Entfernung von Schweißschlacke, Farbe und Rost.
Es ist einfach, zwischen den verschiedenen Köpfen zu wechseln. Der Nadelentroster hat 19 Nadeln und der Meißel 5 verschiedene Meißelköpfe. Der Hammer hat 1 Kopf.
Hub = 14mm
freie Drehzahl = 6000 U/min
durchschnittlicher Luftverbrauch = 128 L/min
Härte Schlagschutz = 548 HB
This ZionAir pneumatic plate shear cuts through most types of plastic and all types of aluminum, tin and steel up to 1,5mm.
The shear is provided with a comfortable soft-grip rubber handle and hardened blades that last longer.
Specifications:
steel thickness = 1,5mm
strokes per minute = 2200spm
average air consumption = 113L/min
air inlet = 1/4" (male connector included)
working pressure = 6,3 bar
The specified air consumption is indicated at a pressure of 6,3 bar.The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.If you need advise, consult one of our experts.
This ZionAir pneumatic hammer is suitable for all kinds of chopping and breaking jobs. The air hammer is not only supplied with a traditional spring holder but also with a new quick-change head! This makes it easy to switch the chisels quickly.Furthermore, the air chisel has a hexagon drive so that the chisel remains firmly centered in position.
robust air hammer
pointed chisel
flat chisel curved
flat chisel straight
flat chisel with small angle
flat chisel with large angle
spring
male connector 1/4" thread
drill hole diameter = 19mm
drive chisels = hex
stroke = 102mm
strokes per minute = 2000spm
average air consumption = 85L/min
This ZionAir body saw on air easily cuts straight and in curves through metal of 1,6mm thick, aluminum of 2,0mm thick and plastic of 2,5mm thick.Ideal for work on body, exhausts and roofs.
including 2 saw blades = 18T and 14T
free speed = 9000rpm
This loose wheel is suitable for the ZionAir pneumatic tire buffer ATB75.
wheel diameter = 55mm
This ZionAir tire buffer on air is suitable for rubber work and roughening of tires.The machine has a variable speed that can be operated with the handle.
diameter rough wheel = 55mm
free speed = 2500rpm
operating pressure = 6,3 bar
Folienradierer mit Stabschleifer DruckluftThis pneumatic strip tool is used, among others, in auto repair shops and other work sites to strip paint and erase. The housing of this air tool exists out of lightweight aluminium and a soft grip. Furthermore, the machine is easy to operate because of the adjustable variable speed.
free speed = 4000rpm
diameter stripping wheel = 88mm
air inlet = 1/4"
average air consumption = 127L/min / 4,5SCFM
working pressure = 6,3bar
Air shear
Comfortable soft grip rubber handle. Heavy duty cutting blades ensure long tool life. Shears most types of plastics and all types of aluminum, tin and steel up to 1,2mm.
- steel = 1,2mm
- strokes per minute = 2200spm
- air inlet = 1/4"
- air hose = 3/8"
- avg. air consumption = 4 SCFM / 113 L/min
- working pressure = 6,3 bar
- length x height = 205 x 142mm
- weight = 1,28kgs
Druckluft Blechschere
Specially designed head cutter makes both straight and contour cuts with a minimum of edge distortion.
Shears most types of plastics and all types of aluminum, tin and steel up to 18 gauge (1,2mm).
- strokes per minute = 3200spm
Air tire repair tool
Durable and lightweight aluminum housing.
Built-in power regulator and trigger control.
The special tapping shaft with round flat tapping face to tap the repair spot even and plain.
- chisel shank = 10,185mm
- bore diameter = 19,05mm
- stroke length = 41mm
- blow per min = 4500bpm
- air inlet = 1/4''
- air hose = 3/8''
- avg. air consumption = 5 SCFM / 142 L/min
Pneumatic screwdriver
Aluminum housing.
Hold the valve pressed to turn on the other side.
The torque will stop automatically once the locking reaches what is set.
Quick change for all bit types.
With noice reducing hose.
- free speed = 1000rpm
- lock torque = 2 - 8kg/cm
Air nibbler pull type Lightweight aluminum housing with soft grip. Cuts up to 1,5mm steel without leaving burr or deformed edges. Adjustable die can be placed in various cutting positions to suit applications. - steel capacity = 1,5mm - sprokes per minute = 3800spm - average air consumption = 9,8 SCFM / 275 L/min - air pressure = 6,3 bar - air inlet = 1/4'' - hose inlet = 3/8''
Air chiselThis ZionAir pneumatic chisel is ideal for smaller demolition jobs such as tiles and masonry. The chisel lies comfortably in the hand thanks to the ergonomic handle. The set consists of an air chisel, a spring holder and 5 matching chisels. Changing the chisels can be done quickly and easily.
Technical specifications:
free speed = 3000rpm
diameter bore hole = 15mm
length chisels = 170mm
diameter chisels = 15mm
diameter shank chisels = 11mm
average air consumption = 80L/min
recommended air hose = 10mm inside diameter (3/8")
Die pneumatischen Lochstanzer und Zangen von ZionAir sind vielseitige Werkzeuge, perfekt zum Lochstanzen und Kantenbearbeiten. Diese Werkzeuge wurden präzise und akkurat entwickelt, so dass sie einfach zu bedienen und effizient sind.