Nail shooter and staple gun
This ZionAir handy and safe 2 in 1 nailer and staple gun is ideal for securing thin wooden plates, for example. Thanks to the quick closure on the magazine, nails and staples are easy to load and switching between staples and nails is no problem during work. The gun is also equipped with a so-called sequential trigger. This ensures accurate fastening and extra security. Involuntary shooting is therefore not possible.
Technical specifications:
capacity staples = 100
capacity nails = 100
length of the staples = 16 - 40mm
length of the nails = 15 - 50mm
average air consumption = 25,5L/min
air inlet = 1/4" (male connector included)
working pressure = 6,3 bar
recommended air hose = 10mm inside diameter (3/8")
The specified air consumption is indicated at a pressure of 6,3 bar.
The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.
If you need advise, consult one of our experts.
Air angle grinder 5" Ideal for editing of metal, rocks or wood. Built-in regulator adjusts speed for various applications. The side handle ensures greater comfort and control. - free speed = 11,000rpm - grinding wheel = 5" - air inlet = 1/4" - air hose = 3/8" - avg. air consumption = 5 SCFM / 141 L/min - working pressure = 6,3 bar - length x height = 225 x 140 - weight = 1,67kg
Air belt sander Easy belt replacement. Suitable for jobs in broad spaces. Helps you to do fine sanding jobs like wood-working, furniture-polishing, plastic, aluminum and metal-polishing and even small spot sanding jobs like trims, curves and other difficult to reach spots. - free speed = 16.000rpm - sanding belt = 20x520mm - air inlet = 1/4" - air hose = 3/8" - avg. air consumption = 7 SCFM / 198 L/min - working pressure = 6,3 bar
Air belt sander long type The smallest Handy belt sander with 10mm wide belt, but with extra length of 600mm. Lever throttle for featuring control. Easy belt replacement. Suitable for jobs in narrow spaces and recessed corners. Helps you to do fine sanding jobs like wood-working, furniture-polishing, plastic, aluminium&metal-polishing, and even small spot sanding jobs like trims, curves, and other diffucult-to-reach spots for common sanding machines. 3 different grit sanding belts (60, 80,120 grit) included for different stage of sanding. Rear exhaust. - free speed = 16000rpm - sanding Belt = 10x600mm - air inlet = 1/4" - air hose = 3/8" - avg. air consumption = 6 SCFM / 170 L/min - working pressure = 6,3 bar
Air chiselThis ZionAir pneumatic chisel is ideal for smaller demolition jobs such as tiles and masonry. The chisel lies comfortably in the hand thanks to the ergonomic handle. The set consists of an air chisel, a spring holder and 5 matching chisels. Changing the chisels can be done quickly and easily.
free speed = 3000rpm
diameter bore hole = 15mm
length chisels = 170mm
diameter chisels = 15mm
diameter shank chisels = 11mm
average air consumption = 80L/min @6,3 bar
Plastic spring driven reel
This Zionair wall reel with ABS plastic housing is easy to use. The hose is adjustable to various lengths and rolls up automatically thanks to the hose guide system. The reel is pivotable by 180 degrees and extra safe to use due to its automatic brake.
It comes with a 15m polymer hose connection hose.
specifications: - material hose = polymer - connection = 1/2" - working pressure = 20bar / 300psi - hose inside diameter = 1/2" - hose length = 15m
Plastic spring driven reel Easy to use. The hose rolls up automatically and is adjustable to various lengths. It comes with a 10m polymer hose connection hose. The reel is pivotable by 180 degrees. specifications: - material hose = polymer - connection = 1/4" - working pressure = 20bar / 300psi - hose inside diameter = 1/4" - hose length = 10m
Plastic spring driven reelThis Zionair wall reel with ABS plastic housing is easy to use. The hose is adjustable to various lengths and rolls up automatically thanks to the hose guide system. The reel is pivotable by 180 degrees and extra safe to use due to its automatic brake.It comes with a 15m polymer hose connection hose.
specifications: - material hose = polymer - connection = 3/8" - working pressure = 20bar / 300psi - hose inside diameter = 3/8" - hose length = 15m
Air impact wrench 1'' Ideal for high volume repair works on trucks, tires and heavy equipments. The removable side handle provides excellent control. - square drive = 1" - capacity = 38mm - free speed = 3,900rpm - power = 2200Nm - air inlet = 1/2" - air hose = 1/2" - avg. air consumption = 23 SCFM / 650 L/min - working pressure = 8 bar - pinless
Air impact wrench 1'' Ideal for high volume repair works on trucks, tires and heavy equipments. The removable side handle provides excellent control. - square drive = 1" - capacity = 45mm - free speed = 3,200rpm - power = 3500Nm (2580ft-lbs) - air inlet = 1/2" - air hose = 1/2" - avg. air consumption = 23 CFM / 650 L/min - working pressure = 6,3 bar - pinless
Air impact wrench 1'' Ideal for high volume repair works on trucks, tires and heavy equipments. The removable side handle provides excellent control. - square drive = 1" - free speed = 3000rpm - power = 5800Nm - air inlet = 1/2" - air hose = 3/4" - avg. air consumption = 650 L/min - working pressure = 6,3bar - pinless
Air wrench / impact wrench with sockets
This ZionAir pneumatic impact wrench with sockets is ideal for the hobbyist, general assembly work. The speed and power can be easily adjusted using a rotary knob. The set consists of:
Air wrench
10 impact sockets = 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27mm
1 extension = 1/2 "125mm
1 torx L-key
1 oiler
Handy storage case
square drive = 1/2"
max. torque = 610Nm
free speed = 7500rpm
average air consumption = 184L/min
air connection = 1/4" (male connector included)
Air riveter Hydraulic piston for increased power. Ultra high speed, ideal for assembly line. Sets rivets up to 1/4" (6mm) steel and 4,8mm stainless steel. Easy operation in any position with one hand. - capacity = 3.2, 4.0, 4.8, 6,0mm - stroke length = 14mm - air inlet = 1/4" - air hose = 3/8" - avg. air consumption = 0,03 SCFM / 0,85 L/min - working pressure = 6,3 bar - length x height = 225 x 93mm - weight = 1,66kgs
Blasting hood / blasting helmet / blasting mask
Ideal for use when blasting with sandblasters. The hood features a large vision, a safety helmet and a soft band for the forehead.
window dimensions = 115 x 60mm
This ceramic nozzle is suitable for the sandblasting gun SB420LG.
size = 7mm
diameter = 21,5mm
Foil set - dimensions = 550 x 250mm - suitable for SB11A sand blasting cabinet - 5 pieces
Foil set
dimensions 1st foil = 670 x 300mm
dimensions 2nd foil = 900 x 260mm
suitable for SB99A and SB120A sand blasting cabinet
2 pieces
Foil set - dimensions = 550 x 250mm - suitable for SB22A sand blasting cabinet - 5 pieces
Nozzle for SK28LG
size = 7,5mm
Nozzle set for big sand blasting guns Suitable for sand blaster type SB42A, SB99A and SB120A.
2x 6mm
2x 7mm
diameter of the nozzles = 21,5mm
