Encore en stockL'un des objectifs est d'avoir tout disponible en stock, mais il peut parfois arriver que quelque chose soit temporairement épuisé. Sur cette page, vous trouverez tous les articles qui sont récemment revenus en stock.
L'un des objectifs est d'avoir tout disponible en stock, mais il peut parfois arriver que quelque chose soit temporairement épuisé. Sur cette page, vous trouverez tous les articles qui sont récemment revenus en stock.
Internal and external puller set
This internal and external puller set is suitable for disassembling oil seals and ball bearings, for example. This set comes in a handy plastic transport case.
Content:
1x small internal puller 15-30mm
1x large internal puller 30-80mm
1x external puller 15-80mm
1x locking nut
1x slidehammer
Visseuse à chocs Ii-ion avec moteur à commutation électronique/outil à chocs sans fil/clé à chocs professionnelle sans balais/clé à chocs Li-Ion/clé à chocs sans fil à usage intensifCette clé à chocs industrielle robuste de Fluxon possède de nombreuses caractéristiques spéciales et est une excellente trouvaille pour les professionnels. Idéal pour toutes les applications de réparation et d'entretien générales et lourdes, l'ingénierie automobile et les projets industriels.Le moteur à commutation électronique assure une durée de vie élevée et permet également un contrôle précis de la vitesse en continu grâce à la gâchette de la clé à chocs.Alimenté par une batterie Li-Ion de 20V et 4,0 Ah qui fournit beaucoup d'énergie pour terminer chaque travail. L'indicateur de batterie vous permet de vérifier les statistiques de la batterie avant de commencer votre projet et vous assure de charger la batterie à temps.La clé à chocs est commandée par un interrupteur directionnel qui enclenche automatiquement le verrouillage de la gâchette en position centrale. Une fois le sens choisi, la commande de la gâchette peut gérer une vitesse variable jusqu'à 1800 tr/min.Une autre grande caractéristique de la clé à chocs sans fil est le bouton PowerProgram, qui permet de sélectionner les 3 réglages de couple de serrage : Pleine puissance / Demi-puissance / Clé serrée, et un mode inverse avec mode spécial de coupure automatique. C'est un outil assez polyvalent, bon pour une grande variété de travaux de fixation et de mécanique.Le mode de sélection du couple de serrage permet un meilleur contrôle de la puissance de l'outil car 3 modes peuvent être sélectionnés avant d'utiliser la clé à chocs.Le mode de sélection inverse est disponible avec 2 modes prédéfinis :Mode 1 - couple de rupture d'écrou de 1700 Nm en marche arrière complète.Mode 2 - pause automatique. Lorsque la gâchette est enfoncée, les outils commencent à marteler en sens inverse, dès que le boulon se desserre et qu'il n'y a plus de résistance, l'outil arrête immédiatement le mouvement inverse.La clé à chocs est équipée d'une puissante lampe de travail à LED intégrée qui éclaire l'espace de travail sans avoir besoin d'une source de lumière supplémentaire.L'outil a une sortie d'air de refroidissement et est équipé d'un circuit de protection de la batterie : conçu pour protéger la batterie contre les dommages dus à une décharge excessive, à une température élevée ou à une surintensité.Contenu de la boîte:
Ultrasonic cleaner / ultrasonic device
Fluxon ultrasonic cleaners are extremely suitable for cleaning a variety of different materials.
By using ultrasonic vibrations, in combination with cleaning fluid, stuck dirt or production residues are easily removed.
Advantages:
Very efficient
Has a digital controller to guarantee a long service life with high precision
Requires little cleanser
Cleans very environmentally friendly
The ultrasonic cleaners are suitable for 3 different cleaning methods:
Normal cleaning: Only water is used for cleaning, temperatures < 50 degrees Celsius
Advanced cleaning: Add some cleaning drops, liquid soap or degreaser, but no acids!
Extensive cleaning: Removal of tarnish, carbon and rust from non-plated metals. Use specific cleansers suitable for ultrasonic cleaners.
Specifications:
tank capacity = 30L
ultrasonic power = 600W
heating power = 500W
cleaning frequency = 28kHz, 40kHz
time control = 1 - 99min
temperature control = 0 - 80 degrees Celsius
tank dimensions = 500 x 300 x 200mm
Welding electrodes rutile These INE rutile welding electrodes are suitable for unalloyed and low alloyed steel (mild steel). They are rutile cellulose welding electrodes in accordance with AWS E6013. INE welding electrodes of the type 6013 are suitable for universal use, all kinds of welding jobs and lighter construction duties. The slag is easy to remove. Furthermore, the welding electrodes are suitable for all welding positions. - brand = INE - thickness = 2,5mm - length = 350mm - suitable for = steel - amount = 14pcs Chemical analysis: C 0.06 Si 0.40 Mn 0.60 Standards: AWS A 5.1/ASME SFA 5.1: E6013 AWS A 5.1/ASME SFA 5.1: E4313 EN ISO 2560-A: E 42 0 RC 1 1 Certificates: DB - TÜV *Certificates are available on request
Flap disc LSZ F3 An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding. Advantages: - good stock removal performance - proven quality with cotton backing - high service life Technical specifications: - diameter = 125mm - grain = K80 - bore = 22,23mm
Body repair kit - capacity = 20 ton - min ram height = 282mm - stroke = 128mm - including hand pump, hose, cylinder ramp, spreader - packed in 2 metal chests: 815 x 400 x 110mm 37kg 810 x 300 x 185mm 32kg
Hand taps set
HSS fully ground hand taps are made from high speed steel. Full grinding during the production process results in a very sharp tap with high precision. In combination with cutting oil this will result in a very long tool life. Very suitable for tapping internal threads in unalloyed steels such as sheet steel, construction steel and cast iron.
Technical specifications:
size = M8
pitch = 1,25mm
length = 63mm
thread length = 18mm
DIN 352
material = HSS-G
intersection angle = flat
right hand
fully ground
3 pieces
Body repair kit cylinder - 1x 4 ton cylinder - 1x 10 ton cylinder - 1 x 2 ton mini cylinder - 1 x 4 ton mini cylinder - 1 x 10 ton mini cylinder - 1 x 2 ton pull cylinder
Flap disc LSZ F3 An attractively priced flap disc with zirconium. Ideal for finishing welding seams, but also heavier sanding. Advantages: - good stock removal performance - proven quality with cotton backing - high service life Technical specifications: - diameter = 125mm - grain = K40 - bore = 22,23mm
Hydraulic flange spreader
This universal flange spreader is standard equipped with a C18S hydraulic coupling. This makes the spreader suitable as a replacement for the body repair sets PHE04 and PHE10.
Thanks to its compact size, the spreader can be used in tight spaces.
capacity = 500kg
connection = 1/4'' NPT thread
Cylinder leak detection kitThis cylinder leak detection set is suitable for testing the engine for problems such as damaged valves, worn sealing rings and leaking head gaskets. The pressure gauge has a range of 0 - 7 bar (0 - 100psi). The leakage meter measures from 0 - 100% leakage in steps of 5%.The set is suitable for any gasoline engine with spark plugs of 12mm and 14mm of almost all cars, motorcycles and trucks.
pressure gauge
leakage gauge
2x spark plug adapter
hose
tank capacity = 10L
ultrasonic power = 240W
heating power = 300W
tank dimensions = 300 x 240 x 150mm
Transmission jack / gearbox jack
This jack is very suitable for (dis)assembling gearboxes. The hydraulic transmission jack is easy to operate with the foot pedal and easy to maneuver in any position using the 4 sturdy castor wheels.
min. height = 1120mm
max. height = 1940mm
stroke = 820mm
Sandblasting gun for big sandblasters Suitable for sand blaster type SB42A, SB42AB, SB99A and SB120A.
Diesel waterpump electric start waterpump: - connection = 100mm / 4'' - cont. head = 31m - self-priming time = 180s/4m - max. suction head = 8m - cont. capacity = 96m3/hr / 1600L/min - dB (10m) = 90 - LWa = 118dB engine: - engine model = 186F - engine speed = 3600rpm - engine type = single-cylinder 4 stroke air cooled diesel engine - displacement = 296cc - bore stroke = 86 x 70mm - electric start - fuel tank capacity = 5,5L * including hose connections
Self-centering three-jaw chuck
The metal workpiece is clamped using this chuck. The chuck is self-centering, so the claws are tightened all three at the same time. It is important that the material has a round, triangular or hexagonal profile.
diameter = 200mm
cylindrical fitting edge
comes with inside and outside set of claws
Welding glass set
4x outside glass
1x inside glass
Suitable for the INE automatic welding helmet Smart
Hydraulic pull back cylinder
capacity = 20 ton
max. length = 980mm
stroke = 200mm
plunger diameter = 48mm
outside diameter = 92mm
working pressure = 750bar
Absorption granules
The Ecowave OCB30 Fibercan+ absorbent is used for removing especially oil and grease stains in the workshop or garage. After application to the stain, the absorbent almost immediately absorbs the oil (or other substance) and converts it into coarse grains.In combination with the Ecowave absorb, it is easy to sweep up, filter and reuse the used absorbent. This makes the use of Fibercan + environmentally friendly, economical and efficient.
The product consists of a natural formula based on lignocellulose fibers, which immediately impact in the liquid. This gives the contaminated substance a coarser size and a different color. This structure makes it easy to separate the absorbent from the contaminated substances using the filter system of the Ecowave absorb, so that the absorbent can be reused.
Traditional absorbents are impractical, high in consumption and produce a lot of waste. With the use of the Ecowave absorb in combination with the Fibercan+ absorbent, all these negative properties are solved.
content = 30L
100% natural