Back in stockOne of our goals is to have everything directly available from our stock, however sometimes a product might be temporarily sold out. On this page, you can find all items, which are back in our stock.
One of our goals is to have everything directly available from our stock, however sometimes a product might be temporarily sold out. On this page, you can find all items, which are back in our stock.
Machine tap
HSS Cobalt 5% machine taps for through holes are made from alloyed high speed steel. With adding Cobalt the taps gets an extremely high hardness which enables them to cut in steel types which are difficult to cut. Full grinding during the production process results in a very sharp tap with high precision. In combination with cutting oil this will result in a very long tool life. Very suitable for tapping through threads in alloyed steels and steels which are difficult to cut such as stainless steel (inox).
Technical specificaties:
size = M6
DIN 371
connection = square
material = HSS - Co5%
intersection angle = point
right hand
fully ground
M35 steel
Worktop solid wood
dimensions = 2041 x 463 x 38mm
This worktop can be mounted on at least 2 of the following cabinets: GC68L7, GC68L5, GC68D2 and GC68TB. Space can be left between the two bottom cabinets for the GC68SC mobile tool cabinet.
This worktop is also part of workshop module 3 and 4, but is also available separately
Hydraulic hand pump Hydraulic operated pump to drive crimping head, cutting heads and punching head. Including 2M high pressure hose and couple plug. - max. output pressure: low pressure = 20 bar / 2MPa high pressure = 700 bar / 70MPa - output of the oil: low pressure = 13cc / 13ml high pressure = 2.3cc / 2.3ml - capacity of the oil = 2000ml
16 Drawers roll cabinet Individual drawer locking 1st drawers -910009 = 8pc srewdriver set -910020 = 8pc star tamp driver set -910021 = 8pc screwdriver set -210050 = 51pc power bit set --------------------------------------------------------------- -910040 = 43pc star assortment set -910033 = 12pc flex.one Gear Wrench 2nd drawer -910001 = 62pc 1/4" drive, socket wrench set -910003 = 24pc 3/8" drive, socket wrench set -910005 = 5pc 1/2" drive, accessory set -910006 = 21pc 1/2" drive, socket wrench set --------------------------------------------------------------- -910041 = 18pc 1/2" drive, eeep socket wrench set -910042 = 14pc 3/8" drive, deep socket wrench set 3rd drawer -910043 = 13pc 1/2" drive deep impact socket set -910044 = 11pc 1/2" drive impact socket set -910045 = 11pc 1/2" drive impact socket bit set -910007 = 11pc 1/2" drive socket bit set ------------------------------------------------------------- -910027 = 23pc ribe socket bit set -910039 = 26pc 3/8 drive socket bit set 4th drawers -910010 = 16pc combination wrench set -910035 = 5pc combinatiom wrenches set -910022 = 8pc flare nut wrench set -910011 = 11pc double open end wrench set ----------------------------------------------------------- -910018 = 7pc hinged socket wrench set -910023 = 3pc hinged socket wrench set 5th drawers -910012 = 8pc ring wrench, 75 degree offset -910036 = 4pc offset ring wrenches set -910013 = 2pc pliers Set -910014 = 3pc pliers Set ----------------------------------------------------------- -910015 = 5pc hammer chisel set -910019 = 13pc chisel punch set 6th drawer -910046 = 4pc long pliers set -910017 = 4pc Snap Ring Pliers set -910016 = 3pc cutting tools set -910049 = 4pc lager hook and pick set ------------------------------------------------------------ -910047 = 5 pc file set -910031 = 7pc measuring tools set 7th 8th drawers empty, free for use / storage
Sanding paper 6'' P320 velcro with holes 5pcs
Rubber pad / rubber support pad Suitable for ATH Heinl, Hofmann and Falco lifts. - dimensions = 120 x 120 x 19mm - inner diameter = 104mm
Car ramp aluminium - length = 200cm - width = 35cm - thickness / height = 70mm - capacity = 500kg a piece / 1000kg a set Price a piece
Hand taps set
HSS fully ground hand taps are made from high speed steel. Full grinding during the production process results in a very sharp tap with high precision. In combination with cutting oil this will result in a very long tool life. Very suitable for tapping internal threads in unalloyed steels such as sheet steel, construction steel and cast iron.
Technical specifications:
size = M14
pitch = 2,00mm
length = 80mm
thread length = 30mm
DIN 352
material = HSS-G
intersection angle = flat
3 pieces
Contact tip
Suitable for the MIG MAG torch MLT24 and MLT36.
screw thread = M8
wire thickness = 1,6mm
length = 30mm
50 pieces
Tip adapter plasma torch
Suitable for the plasma torch PL80.
80 - 100A
10 pieces
Optional roller Suitable for profile and pipe nothcer BSM100MF. - 20mm
Tip plasma torch
Suitable for the plasma torch PL141.
size = 1.7mm
Tool cabinet / workshop cabinet
This low model wall cabinet consists of two doors that can be closed with a cylinder lock, the inside has a height-adjustable shelf. The wall cabinet can be combined with other modules from the Expert series and is part of the following modules:
HSS Core drill
High-quality HSS core drill for magnetic drilling machines.
Characteristics:
HSS (high speed steel)
M35: comparable to M2 standard high speed steel, but with 5% cobalt added. M35 cuts faster and lasts longer than M2.
Specifications:
diameter = 50mm
cutting depth = 30mm
Cone set - suited for big rims (Iveco) - inside ring diameter = 140mm
- for machines with 36mm axle - 2 pieces
Flat cylinder This cylinder is suit for working in narrowness. The surface of the plunger is finished with a chrome plate. Plunger has the function of retracting automatically.
output = 30 Ton
stroke = 12mm
effective area = 31,1cm^2
oil capacity = 0.05 L
height of product = 63mm
extended height = 75mm
outside diameter = 115x95mm
bore diameter = 75mm
plunger diameter = 63mm
thread for oil input = 3/8''-19
saddle protusion form Plgr = 2mm
max. pressure = 700bar
Hydraulic cylinder Hardy underlay to avoid axis break when it is overloading. The surface of principle axis is finished with chrome plate. Plunger has the function of retracting automatically. Surface coating resists corrosion. - output = 5 ton - stroke = 150mm - effective area = 9,6cm^2 - oil capacity = 0,108 L - height of product = 233mm - extended height = 382mm - outside diameter = 40mm - bore diameter = 30mm - plunger diameter = 25mm - thread for input oil port (ZG) = 1/4" - 18 - saddle protrusion form plgr = 13mm - saddle is removable - max. pressure = 700bar
Remote control
Suitable for electric winch CW15V24.
built-in
24V
range = 15m