Hydraulikzylinder

It has the characteristic of a low collapsed height. If the requirement of stroke needs to be higher, the ZFL cylinders are recommended.
The surface of principle axis is finished with chrome plate.
Plunger has the function of retracting automatically.

• output = 50 ton

• stroke = 50mm

• effective area = 56,7cm^2

• oil capacity = 0,354 L

• height of product = 104mm

• extended height = 154mm

• outside diameter = 128mm

• bore diameter = 95mm

• plunger diameter = 65mm

• thread for input oil port (ZG) = 3/8" - 19

• saddle protrusion form plgr = 2mm

• saddle is removable

• max. pressure = 700bar

Schleifscheibe 150mm P120 Klettband mit Löcher 5Tlg

Ölauffangwanne mit Ausgießer

This oil drain pan is suitable for the draining of oil and other liquids at various activities. Because the edge of the pan is folded inwards, the oil does not go over the edge when the pan is emptied. The volume of the pan is 4 gallon (15 liters).

Parts cleaner / parts washer / mobile biological degreaser / sink / degreasing fountain

The Ecowave PWB40 professional parts washer cleans parts without chemicals, protecting both the user and the environment.
This new generation of parts cleaner works with a cleaning solution based on a natural regeneration, in which oxygen and micro-organisms are used to destroy pollutants. This process ensures cost effective and efficient maintenance.
The cleaner is particularly suitable for cleaning / degreasing parts that are contaminated with grease, oil and other residues.

The PWB40 Ecowave move is very mobile because of the 4 PU swivel wheels, 2 with brakes, and therefore suitable for different types of workshops and garages. The cleaner must be connected to power until the indicator light comes on, which means that the cleaning bath has reached an optimal temperature. The device is then independent and can move freely within the workshop. This makes it easy to clean every object at different locations. The pump and blow gun for drying operate on compressed air.
The parts washer is also equipped with an integrated soaking tray. Here you can put a part to soak for a longer period of time.
With a capacity of 40 liters, the container is suitable for medium-sized parts.

The parts cleaner also has the following strong features:

• Mobile parts washer

• Ergonomic design

• 50µm filter to maintain cleaning performance

• Regulated heating system at 38 degrees Celsius

• Safety thermostat for protection against overheating

• Blow gun with compressed air connection for drying

• Powerful degreaser brush

• Easy to maintain

• Simple control panel: one switch

• Convenient handle for movement

Technical specifications:

• tank capacity = 40L

• soaking area = 4L

• soaking area dimensions = 240 x 220 x 80mm

• working area dimensions = 550 x 430 x 150mm

• pump flow = adjustable from 0 to 6L/min

• heating power = 2kW

• electric consumption = 150W

• load capacity = 30kg

• heating process from 15 to 38 degrees Celsius = at 20L about 15min.

• composition = HDPE

• tool holder = interchangeable brush

• filtration = filter bag polypropylene 50µm

• power supply = 230V = 2kW (9A)

Festrad / Festes Rad

• Radgröße = 260 x 82mm

• Kapazität = 110kg

• Plattengröße = 100 x 115mm

• Gesamthöhe = 300mm

• Bolzennlöcher von Mitte zu Mitte = 85 x 72mm

• Bolzenlochabmessungen = 18 x 10mm
  

• Material = Massiv Gummi

Schweißstab TIG

This INE TIG Stainless welding wire is suitable for connecting equal and unequally types of stainless steel. It is a stainless steel TIG welding wire in accordance with AWS E316L-Si. This welding wire is suitable for applications where a high degree of corrosion resistance is desired.

- brand = INE

- thickness = 2,4mm

- TIG 316LSi

- suitable for = stainless steel

- lengte = 1 meter

- weight = 5kg

Standards:

AWS A 5.9: ER316LSi

EN ISO 14343-A W 19 12 3 LSi

Anchor

- galvanised

- weight = 20kg

Werkstattwagen

This blue tool chest has ball bearing slides. There are 2x 125mm castors and 2x 125mm fixed wheels. Amongst others, Seneca Tools inlay trays fit perfect in this tool chest.

Specifications:
- total sizes excl. castors = 688 x 458 x 735mm
- total sizes incl. castors = 688 x 458 x 885mm
- 2 drawers = 589 x 411 x 48mm
- 2 drawers = 589 x 411 x 80mm
- 2 drawers = 589 x 411 x 100mm
- 1 drawer = 589 x 411 x 150

- capacity per drawer = 30kg

Schruppscheibe KSM

Provided with a special top layer.
Hard, preferably for edge-grinding, or soft, for surface treatment.
High stock removal.

- diameter = 125mm
- thickness = 7,0mm
- bore = 22,23mm
- V27

Klimaservicegerät / Diagnosestation / Servicegerät / Klimatankstelle / Kfz-Klimaservicestation

Compact, economic, and modern model ACVA500HFO from Ecotechnics is a solid and very user-friendly air conditioning filling station which is suitable for HFO refrigerants.
The operation of the service unit allows you to completely avoid the typical "emissions" (dispersion) of refrigerant gas into the environment, which is released at the end of a normal refueling of the car's cooling system, when the charging hoses are removed from this system.
The machine recovers almost 100% of the refrigerant and checks the air conditioning system for leaks. Diagnosis station equipment automatic leak testing system: check for leaks during the vacuum phase. If leaks are found, it interrupts operation and gives an alarm.
Air conditioning filling station equipped with hermetic cartridges offer the advantage of eliminating contact between the humidity naturally present in ambient air and the oil or dye, which are hydroscopic substances (that is, substances that easily absorb humidity).
Oil management both with standard refillable containers and with hermetic cartridges.
The machine has a fully automatic mode and can be put into manual mode in cases of diagnosis, where each phase can be performed one by one.
Thanks to its extremely compact size, the ACVA500 HFO is very suitable for use in mobile workshops, work buses etc.
The machine is equipped with:

• Freon charging transfer kit
• 3m hose package with quick couplings
• Integrated Data Base Car-Truck-Agri
• Integrated vacuum pump 51 lt/min
• Thermal Printer for a complete detailed report.

Features:

• Fully automatic service
• Electronic oil scale
• il type change function
• Refillable standard containers for oil and dye
• Automatic Leak Testing
• Energy-saving with 12-volt solenoid valve technology
• C.A.R.Method
• Ventilated
• Refillable standard containers
• Made in Italy

Technical specifications:

• Voltage = 220-240V 50/60 Hz
• Type of refrigerant = HFO1234YF
• Service valves = Manual
• Non condensable gas purge = Manual
• Hoses = 3 m
• Capacity vacuum pump = 51 L/min
• Vacuum level = 0.2 Mbar
• Sealed compressor = 1/3 HP
• Recovery speed = 300 g/min in liquid phase
• Tank Scale resolution = 10 g
• Working temperature range = 11/49°C
• Filter system = 1 filter for humidity
• Refrigerant tank = 12 liters refillable
  

Anchor

- galvanised

- weight = 25kg

This Cowley metal shrinker and stretcher offers a durable design, perfect for professional and industrial use.

This portable racking tool is ideal for forming, stretching and crimping sheet metal, profiles and flange edges.

Specifications:

• max. sheet thickness mild steel = 1,2 mm

• max. aluminum plate thickness = 1,7 mm

Solenoid 24V Flansch Cummins

Anchor
- galvanised
- weight = 600kg

Arbeitsplatte Massivholz

• dimensions = 2041 x 463 x 38mm

This worktop can be mounted on at least 2 of the following cabinets: GC68L7, GC68L5, GC68D2 and GC68TB. Space can be left between the two bottom cabinets for the GC68SC mobile tool cabinet.

This worktop is also part of workshop module 3 and 4, but is also available separately

Laderampe / Motorradrampe

This Torso lightweight ramp is suitable for loading motorcycles, scooters and the like on a trailer or in a bus. This makes it easy to transport vehicles. The aluminum plate is equipped with a anti-slip profile which provides extra grip.
The ramp has the following features:

• full aluminum design, lightweight ramp

• anti-slip profile for extra grip

• easy to store and transport

Specifications:

• capacity = 500kg (1000kg per set)

• length = 2m

• track width = 21,5cm

• material = aluminum

• weight = 8,8kg/piece

Price per piece!

Handgewindebohrer Satz

HSS geschliffen Handgewindebohrer werden aus legiertem Schnellarbeitsstahl hergestellt. Vollschliff während des Produktionsprozesses führt zu einem sehr scharfen Gewindebohrer mit hoher Präzision. In Kombination mit Schneidöl führt dies zu einer sehr hohen Standzeit. Sehr gut geeignet zum Gewindebohren von Innengewinden in unlegierten Stählen wie Stahlblech, Baustahl und Gusseisen.

Technische Daten:

• Größe = M14

• Steigung = 2,00mm

• Länge = 80mm

• Drahtlänge = 30mm

• DIN 352

• Material = HSS - G

• Schnittwinkel = Flach

• rechte Hand

• vollständig geschliffen

• 3 Stück

Düsenstock Plasmabrenner

Geeignet für den Plasmabrenner PL80.

• 80 - 100A

• 10 Stück

Optionale Rolle

Suitable for profile and pipe nothcer BSM100MF.

- 20mm

Stromdüse Plasmabrenner

Geeignet für den Plasmabrenner PL141.

• Größe = 1.7mm

• 80 - 100A

• 10 Stück